Comeup CWG-31500 User manual

Electric Winch
Model: CW
G
-
31500
P/N: w/5.5 kw x 6P motor
159521 415V50Hz
Introduction
 Feature
Lifting capacity: 3,500 kg at 50Hz wire rope top layer
Lifting height: 144 m
Lifting speed: 6P: 5.8-8 m/min
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
 Unpacking
．Winch assembly 1pc
．Low voltage control ass’y LV-320 1pc
．Low voltage control ass’y LV-360 for PN:155185 1pc
．Pendant switch PB-306 w/cord 1.25 mm2
x 3C x 3 m 1pc
 Read this manual carefully
You should carefully read and understand this manual carefully before
operating it. Careless winch operation may result in personal injury hazards
or property damage.
 Information requesting or parts ordering
Please specify the followings information:
．Winch part number
．Part description
．Quantity for each part
．Serial number
．Replacement part number
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
 Performance
 Wiring Diagram
Winch Model CWG-31500
Motor kw x p 5.5 x 6 3.8 x 8
Recommend
Wire Rope
Size(mm) 18
Breaking (kg) 15,000
1st
Layer
Rated Load
(kg) 50Hz 4,848
2nd
Layer
Rated Load
(kg) 50Hz 4,422
3rd
Layer
Rated Load
(Kg) 50Hz 4,065
Speed
(m/min) 50Hz 6P 5.8 Speed (m/min) 50Hz 6P 6.4 Speed (M/min) 50Hz 6P 6.9
8P 4.4 8P 4.8 8P 5.2
Rope-Winding Cumulating
Sum
(
m
)
25 Rope-Winding Cumulating
Sum
(
m
)
53 Rope-Winding
Cumulatin
g
Sum
(
m
)
83
4th
Layer
Rated Load
(kg) 50Hz 3,761
5th
Layer
Rated Load
(kg) 50Hz 3,500
Speed
(m/min) 50Hz 6P 7.5 Speed (m/min) 50Hz 6P 8
8P 5.6 8P 6
Rope-Winding Cumulating
Sum (m) 116 Rope-Winding Cumulating Sum (m) 150

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Standard Value for brake coil :
Item No. Description Part No. Qty
1 Motor kit 880675 1
2 Motor support rack kit 880651 1
3 Drum kit 880652 1
4 Connect shaft kit 880653 1
5 Tie ba
r
kit 880654 4
6 Gearbox support rack kit 880655 1
7 3rd stage carrier kit 881631 1
8 2nd stage carrier kit 881632 1
9 3rd ring gear kit 880660 1
10 Fix plate kit 880661 1
11 1st stage carrier kit 881625 1
12 1st & 2nd ring gear kit 880664 1
13 1st shaft kit 880665 1
14 Brake base kit 881443 1
15 Brake kit 881361 1
15-1 Brake disc 880626 2
15-2 Brake coil 880649 1
16 Brake rear cover kit 880627 1
17 - - -
18 Low voltage control ass’y LV-320 881828 1
18-1 Remote control,PB-306 881048 1
19 Base plate kit 880671 1
Volta
g
e 415V
Black & Blue wires 117Ω
Black & Red wires 52Ω
Red & Blue wires 62Ω
Winch Assembly