Comeup CWG-30565 User manual

Electric Winch
Model: CWG-30565
P/N: w/5.5 kw x 4P motor
159512 380V50Hz
158547 415V50Hz
Introduction
XFeature
Lifting capacity: 1,100 kg at 50Hz wire rope top layer
Lifting height: 97 m
Lifting speed: 4P: 14-25 m/min at 50Hz ; 6P: 9.2-16.4 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control; Pendant switch powers the winch
XUnpacking
．Winch assembly 1pc
．Wire rope 12 mm x 100 m w/safety hook 1pc
．Low voltage control ass’y LV-320 1pc
．Pendant switch CPB-161 w/cord 1.25 mm2
x 3C x 3 m 1pc
XRead this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
XInformation requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part

Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
XPerformance
XWiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Winch Model CWG-30565
Motor kw x p 5.5 x 4 3.8 x 6
Size(mm) 12.0
Recommend
Wire Rope Breaking (kg) 6,680
Rated Load
(kg) 50Hz 1,968 Rated Load (kg) 50Hz 1,700 Rated Load (kg) 50Hz 1,496
4P 14 4P 16.2 4P 18.4
Speed
(m/min) 50Hz 6P 9.2 Speed
(m/min) 50Hz 6P 10.6 Speed
(m/min) 50Hz 6P 12.1
1st
Layer
Rope-Winding Cumulating
Sum
(
m
)
12
2nd
Layer
Rope-Winding Cumulating
Sum
(
m
)
26
3rd
Layer
Rope-Winding
Cumulatin
g
Sum
(
m
)
42
Rated Load
(kg) 50Hz 1,336 Rated Load (kg) 50Hz 1,207 Rated Load (kg) 50Hz 1,100
4P 20.6 4P 22.8 4P 25
Speed
(m/min) 50Hz 6P 13.5 Speed (m/min) 50Hz 6P 15.0 Speed (m/min) 50Hz 6P 16.4
4th
Layer
Rope-Winding Cumulating
Sum (m) 59
5th
Layer
Rope-Winding Cumulating
Sum (m) 79
6th
Layer
Rope-Winding
Cumulating Sum (m) 100

Parts List
Part No. configurations:
Standard Value for brake coil:
Item No. Description Part No. Qty
1 Motor kit As arranged 1
2 Motor support rack kit 880723 1
3 Drum kit 880724 1
4 Connect shaft kit 880725 1
5 Tie bar kit 880726 4
6 Gearbox support rack kit 880727 1
7 2nd stage carrier kit 881576 1
8 Ring gear kit 880730 1
9 1st stage carrier kit 881577 1
10 1st shaft kit 880733 1
11 Brake base kit 880625 1
12 Brake kit As arranged 1
12-1 Brake disc 880626 2
12-2 Brake coil As arranged 1
13 Brake rear cover 880627 1
14 Wire rope w/hook 880737 1
15 Low voltage control ass’y LV-320 As arranged 1
15-1 Remote control, CPB-161 881047 1
16 Base plate kit 880738 1
Cycle Voltage kw x p Motor kw x p Motor
50 Hz 220 / 380 5.5 x 4 880637 3.8 x 6 880641
50 Hz 415 V 5.5 x 4 880638
50 Hz 440 V 5.5 x 4 880636
Cycle Voltage Brake kit Brake coil LV-320
50 Hz 380 V 881345 880648 881826
50 Hz 415 V 881346 880649 881831
50 Hz 440 V 881347 880650 881834
Voltage 220V 380V 415V 440V
Black & Blue wires 28Ω108Ω117Ω126Ω
Black & Red wires 12Ω48Ω52Ω56Ω
Red & Blue wires 15Ω54Ω62Ω70Ω

Winch Assembly