Comeup CP-300 User manual

Electric Winch
Model: CP-300
PN: 153333 240V50Hz 154422 230V50Hz
155240 240V50Hz 155352 220V50Hz
155252 220V50Hz 152383 230V50Hz
152438 240V50Hz
Introduction
Feature
Lifting capacity: 300 kg wire rope top layer
Lifting height: 29 m
Lifting speed: 10-15 m/min at 50Hz
Brake: Electromagnetic spring-applied failsafe brake
Control: Pendant switch powers the winch
Unpacking
．Winch assembly 1pc
．Wire rope 6 mm x 30 m except for PN:155252 1pc
．Wire rope 6 mm x 30 m A7x19 for PN:152383 1pc
．Weight hook CHW-0031 except for PN:155252 1pc
．Power lead 1.5 mm2
x 3C x 3 m and plug 1pc
．Pendant switch PB-331 w/cord 2 mm2
x 5C x 3 m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Part description
．Quantity for each part
．Serial number
．Replacement part number
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Performance
Wiring Diagram
Winch Model CP-300
Motor kw x p 1.1 x 4
Recommend
Wire Rope Size(mm) 6
Breaking (kg) 2,010
1st
Layer
Rated Load
(kg) 50Hz 444
2nd
Layer
Rated Load
(kg) 50Hz 396
3rd
Layer
Rated Load
(kg) 50Hz 358
Speed
(m/min) 50Hz 10 Speed (m/min) 50Hz 11.3 Speed (M/min) 50Hz 12.5
Rope-Winding Cumulating
Sum (m) 5.4 Rope-Winding Cumulating Sum (m) 11.5 Rope-Winding Cumulating Sum (m) 18.3
4th
Layer
Rated Load
(kg) 50Hz 327
5th
Layer
Rated Load
(kg) 50Hz 300
Speed
(m/min) 50Hz 13.8 Speed (m/min) 50Hz 15
Rope-Winding Cumulating
Sum (m) 25.7 Rope-Winding
Cumulating Sum (m) 30

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Parts List
Item No. Description Part No. Qty
1 Induction motor kit for 220/230V 880413 1
Induction motor kit for 240V 880415
2 Control kit, 3 flat pins 881965 1
Control kit, 3 round pins 881751
3 Bridge rectifier CBR-061 880368 1
4 Support bracket 880369 2
5 Drum kit 880370 1
6-1 Tie bar 881862 1
6-2 Tie bar kit 880371 3
7 2nd shaft kit 880372 1
8 Gear box kit 880373 1
9 1st stage carrier 880374 1
10 1st shaft kit 880375 1
11 Conductor kit 880376 1
12 Brake coil 110V 880377 1
Brake coil 220V for 240V/50Hz 880388
13 Conductor plate A 880403 2
14 Brake disc 880379 2
15 Hex socket 880380 1
16 Conductor plate B kit 880381 1
17 Brake cover 880382 1
18 Wire rope 880383 1
Wire rope for PN:152383 881429
19 Weight hook CHW-0031 880384 1
Winch Assembly