Connect Tech CCG010 User manual

1
COM Express®Type 10 Mini Carrier
CCG010 / CCG020
Users Guide
Connect Tech Inc.
42 Arrow Road
Guelph, Ontario
N1K 1S6
Tel: [phone]
Toll: 800-426-8979 (North America only)
Fax: [phone]
Email: [e-mail]
[email protected]
Web: www.connecttech.com
CTIM-00120 Revision: 0.04 October 7, 2015

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
2
Table of Contents
Customer Support Overview .......................................................................................................................... 4
Contact Information........................................................................................................................................ 4
Limited Lifetime Warranty............................................................................................................................. 5
Copyright Notice ............................................................................................................................................ 5
Trademark Acknowledgment ......................................................................................................................... 5
Revision History............................................................................................................................................. 5
Introduction .................................................................................................................................................... 6
ESD Warning............................................................................................................................................................ 6
Product Features and Specifications............................................................................................................... 7
Block Diagram ............................................................................................................................................... 8
Connector Locations....................................................................................................................................... 9
Connector Summary......................................................................................................................................11
Jumper Summary...........................................................................................................................................11
Detailed Feature Pinouts and Functional Descriptions..................................................................................12
COM Express Module Connector........................................................................................................................... 12
Input Power Connector ........................................................................................................................................... 12
DisplayPort ++ (DDI) Video Connector................................................................................................................. 13
HDMI / DVI / VGA.........................................................................................................................................13
LVDS Video Connector.......................................................................................................................................... 14
LVDS Backlight Power Connector......................................................................................................................... 15
USB 2.0 Port Connectors........................................................................................................................................ 15
USB 3.0/2.0 Port Connectors.................................................................................................................................. 16
10/100/1000 Ethernet (GBE) Connector................................................................................................................. 17
Software Support for the Intel 82574...............................................................................................................17
Audio Interface Connector...................................................................................................................................... 18
Software Support for the CS4207 ....................................................................................................................18
External SATA (CCG010 Only)............................................................................................................................. 19
mini PCIe & mSATA Slots..................................................................................................................................... 20
Dual Function mini PCIe mSATA Slots ..........................................................................................................20
Half and Full Length mini PCIe / mSATA module Installation.......................................................................21
Standoff and Screw Assembly Details .............................................................................................................21
CCG020 –External Hard Drive Installation ....................................................................................................21
mini pcie / mSATA Connector Pinout .............................................................................................................22
Asynchronous Serial RS-232/485 Connector.......................................................................................................... 23
RS-232/485 Connector.....................................................................................................................................23
RS-232/485 Jumper Configuration ..................................................................................................................23
microSD Card Connector........................................................................................................................................ 24
Misc/System Connector.......................................................................................................................................... 25
RTC Battery Connector .......................................................................................................................................... 26
Typical Hardware Installation Procedure......................................................................................................27
On-board Indicator LEDs (CCG010 Only)............................................................................................................. 27

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
3
Jumper Settings .............................................................................................................................................28
Current Consumption Details........................................................................................................................29
Thermal Details.............................................................................................................................................29
Mechanical Details........................................................................................................................................30
Cables and Cable Kit Information.................................................................................................................31
Cable Kits ............................................................................................................................................................... 31
Detailed Cable Information..................................................................................................................................... 33
RJ-45 panel mount to 10-pin MiniTek w/Latch - CBG117..............................................................................33
Dual 3.5mm Stereo Audio panel mount to 8-pin MiniTek w/Latch - CBG118................................................34
Dual USB 2.0 panel mount to 8-pin MiniTek w/Latch - CBG104...................................................................35
DisplayPort++ panel mount to 20-pin MiniTek w/Latch - CBG113................................................................36
Dual DB-9 panel mount to 10-pin MiniTek w/Latch - CBG111......................................................................37
3V CR2032 RTC Battery with 3-pin Connector and Cable Assembly - 6032101013......................................38
System Cable - Unterminated wires to 20-pin MiniTek w/Latch - CBG116....................................................39
Power Cable - Unterminated wires to 6-pin MiniTek w/Latch - CBG112.......................................................40
CBG131 - Dual USB 3.0 to 20-Pin Cable........................................................................................................41

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
4
Customer Support Overview
If you experience difficulties after reading the manual and/or using the product, contact the
Connect Tech reseller from which you purchased the product. In most cases the reseller can help
you with product installation and difficulties. In the event that the reseller is unable to resolve
your problem, our highly qualified support staff can assist you. Our support section is available
24 hours a day, 7 days a week on our website at: www.connecttech.com/sub/support/support.asp.
See the contact information section below for more information on how to contact us directly. Our
technical support is always free.
Contact Information
Mail/Courier
Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
Email/Internet
[email protected]m
[email protected]m
www.connecttech.com
Note:
Please go to the Download Zone or the Knowledge Database in the Support Center on the Connect
Tech website for product manuals, installation guides, device driver software and technical tips.
Submit your technical support questions to our customer support engineers via the Support Center
on the Connect Tech website.
Telephone/Facsimile
Technical Support representatives are ready to answer your call Monday through Friday, from
8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:
Toll Free: 800-426-8979 (North America only)
Telephone: [phone] (Live assistance available 8:30 a.m. to 5:00 p.m. EST,
Monday to Friday)
Facsimile: 519-836-4878 (on-line 24 hours)

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
5
Limited Lifetime Warranty
Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this
product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty
period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided
that the product has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech
Inc. authorized modification or repair.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc.
business partner or to Connect Tech Inc. along with proof of purchase. Product returned to
Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material
Authorization) number marked on the outside of the package and sent prepaid, insured and
packaged for safe shipment. Connect Tech Inc. will return this product by prepaid ground
shipment service.
The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. This is
defined as the period during which all components are available. Should the product prove to be
irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or
to retract Lifetime Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under no
circumstances will Connect Tech Inc. be liable in any way for any damages, including any lost
profits, lost savings or other incidental or consequential damages arising out of the use of, or
inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. Connect Tech
Inc. shall not be liable for errors contained herein or for incidental consequential damages in
connection with the furnishing, performance, or use of this material. This document contains
proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated to another language without the prior
written consent of Connect Tech, Inc.
Copyright

2015 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred
to in this document as the property of their respective owners.
Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of
acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this
document.
Revision History
Revision
Date
Changes
0.00
08/06/2013
Original
0.01
02/25/2015
Pinout Updates
0.02
09/09/2015
Added CCG020 Information
0.03
09/21/2015
Corrected RS-232/RS-485 Pinout/Jumper Info
0.04
06/10/2015
Corrected Ethernet Naming Error and Fixed Naming Consistency

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
6
Introduction
Connect Tech’s COM Express® Type 10 Mini Carrier Board is an extremely small carrier board
featuring rugged, locking connectors and offers the ultimate durability.
COM Express® Type 10 Mini Carrier Board is ideal for space constrained applications, harsh
environments, demanding conditions and supports extended temperature ranges of -40°C to
+85°C.
ESD Warning
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any circuit
board assemblies including Connect Tech COM Express
carrier assemblies, it is recommended that ESD safety
precautions be observed. ESD safe best practices include, but
are not limited to:
Leaving circuit boards in their antistatic packaging
until they are ready to be installed.
Using a grounded wrist strap when handling circuit
boards, at a minimum you should touch a grounded
metal object to dissipate any static charge that may be
present on you.
Only handling circuit boards in ESD safe areas, which
may include ESD floor and table mats, wrist strap
stations and ESD safe lab coats.
Avoiding handling circuit boards in carpeted areas.
Try to handle the board by the edges, avoiding contact
with components.

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
7
Product Features and Specifications
Specifications
Compatibility
COM Express®Type 10 Mini Modules
PICMG COM Express® COM.0 R2.1
Mini PCIe Expansion
2 x half size cards OR 1 x full length card
Both sockets have PCIe and USB signaling, one socket also can be
configured as mSATA.
Storage
CCG010: 1 x mSATA, 1 x 1 Ext RA 7-pin Connector
CCG020: 1 x mSATA
USB
CCG010: 8 x USB 2.0 Ports (6 to connectors, 2 to miniPCIe)
CCG020: 2 x USB 3.0 Ports (Only if supported by COM Express
Module) 6 x USB 2.0 Ports (2 to USB 3.0 connector, 2 to USB 2.0
connector, 2 to miniPCIe)
Network
2 x Gigabit Ethernet (10/10/1000) Ports:
1 from COM Express
1 from on-board Intel 82574I PHY/Controller
GPIO
8-bit GPIO
Display
1 x DisplayPort++ (DDI) interface:
Can be used for DisplayPort, HDMI, DVI or VGA
1 x LVDS interface (18-bit, 3 data pairs)
Audio
HD Audio (Cirrus Logic CS4207 codec)
1 x stereo input
1 x stereo output
Serial
2 x RS-232/422/485 hardware selectable ports
Misc External Interfaces
SMBus
I2C
Battery Low Indication
System Status (S3 and Reset Outputs)
Power
Single wide input range
+6V to +14V DC (may be module dependent)
Connectors
All shrouded locking ruggedized 2mm pitch headers.
-Can be mated to CTI cable set which terminate to panel
mountable PC type connectors.
-As well can mated to customer cables sets to terminate to
any customer or MIL type connectors
Mechanical Information
84mm x 55mm (Same as Type 10 mini Form Factor)
CCG010/20: Download 3D model here
Weight
49g (carrier only, no module installed)
MTBF
1253592 hrs / 797.7073 FITs
Operating Temperature
-40°C to +85°C
Warranty and Support
Lifetime Warranty and Free Technical Support

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
8
Block Diagram
CCG010 Block Diagram
CCG020 Block Diagram

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
9
Connector Locations
CCG010 Top View
CCG010 Bottom View

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
10
CCG020 Top View
CCG020 Bottom View

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
11
Connector Summary
Designator
Connector
Description
P1A
2x5 2mm Locking Pin-Header
GBE1 Connector
P1B
2x5 2mm Locking Pin-Header
GBE0 Connector
P2
2x10 2mm Locking Pin-Header
DisplayPort++ Connector
P3
microSD Card Socket
microSD Card Connector
P4
2x3 2mm Locking Pin-Header
Input Power Connector
P5
1x3 1.25mm Locking Header
RTC Battery Connector
P6
19-Pin 2mm Locking Header
USB 3.0 Connector (CCG020 only)
P7
2x5 2mm Locking Pin-Header
RS-232/485 Connector
P8
220-pin Board to Board Connector
COM Express Type 10 Connector
P9
20-pin Hirose Panel Connector
LVDS Video Connector
P10
2-pin Power Connector
LVDS Backlight Power Connector
P11
Right Angle SATA Connector
SATA 1 Connector
P12
2x10 2mm Locking Pin-Header
Misc/System Connector
P13
2x4 2mm Locking Pin-Header
Audio Input/Output Connector
P14A
2x4 2mm Locking Pin-Header
USB 2.0 Port 1 & 2 Connector
P14B
2x4 2mm Locking Pin-Header
USB 2.0 Port 3 & 4 Connector
P14C
2x4 2mm Locking Pin-Header
USB 2.0 Port 5 & 6 Connector
Jumper Summary
Designator
Jumper
Description
J1
6-position 1.27mm Jumper Block
RS-232/RS-485 Jumper Block
J2
6-position 1.27mm Jumper Block
Misc/System Jumper Block

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
12
Detailed Feature Pinouts and Functional Descriptions
COM Express Module Connector
The processor and chipset are implemented on the COM Express Type 10 CPU module, which connects to
the COM Express carrier via a Tyco fine pitch stacking connector.
Function
COM Express interface
Location
P1
Carrier
Connector
PN
3-6318491-6
Manufacturer: TE Connectivity
Mating
Connector
PN
3-1827231-6
Manufacturer: TE Connectivity
Pinout
Refer to COM Express R2.0 specification,
Type-10
Input Power Connector
The COM Express Type 10 Mini Carrier accepts a single input to power all of the on board devices. All
intermediate voltages are derived from this input. Most COM Express Type 10 module can accept a wide
input voltage range, however the on-board power supplies on CTI’s carrier can only accept up to a
maximum of +14V.
Function
Main Input Power
Location
P4
Input Range
+6 VDC to +14 VDC
Carrier
Connector PN
98424-G52-06LF - Manufacturer: FCI
Mating
Connector PN
10073599-006LF - Manufacturer: FCI
Pinout
Pin
Signal
Description
1
GND
Ground / Return
2
GND
Ground / Return
3
GND
Ground / Return
4
+VIN
Power In
5
+VIN
Power In
6
+VIN
Power In

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
13
DisplayPort ++ (DDI) Video Connector
The COM Express Type 10 Mini Carrier features a DisplayPort++ connector. This can be configured to
output DisplayPort, HDMI/DVI or even VGA through the use of a dongle.
The configuration of each interface is setup via the COM Express module’s BIOS settings. Refer to the
COM Express module’s documentation for more details.
Function
Main Input Power
Location
P4
Carrier
Connector PN
98424-G52-20LF - Manufacturer: FCI
Mating
Connector PN
10073599-020LF - Manufacturer: FCI
Pinout
Pin
Signal
Description
1
DP0+
DisplayPort Pair 0
2
DP3+
DisplayPort Pair 3
3
DP0-
DisplayPort Pair 0
4
DP3-
DisplayPort Pair 3
5
GND
GND
6
GND
GND
7
DP1+
DisplayPort Pair 1
8
DPAUX-
DisplayPort Auxiliary Pair
9
DP1-
DisplayPort Pair 1
10
DPAUX+
DisplayPort Auxiliary Pair
11
GND
GND
12
GND
GND
13
DP2+
DisplayPort Pair 2
14
DP.HPD
Hot Plug Detect
15
DP2-
DisplayPort Pair 2
16
GND
GND
17
GND
GND
18
GND
GND
19
DP_PWR
DisplayPort Power (+3.3V)
20
DP_AUX_SEL [1]
Auxiliary Selection
[1] –For DP_AUX_SEL –Cable assembly must tie high (+3.3V) for HDMI/DVI output and low (GND) for
DisplayPort output.
HDMI / DVI / VGA
The COM Express Type 10 Mini Carrier’s DisplayPort++ connector can be used for display outputs other
than DisplayPort. The use of HDMI, DVI or VGA can be done through a simple dongle or cable assembly
like the ones shown below. These can be purchased from any OEM vendor (such as www.startech.com ) or
directly through Connect Tech. Note: Some newer processor series like the Intel Baytrail can actually
output proper TMDS signaling, so no external dongles are needed in this case. TMDS actually comes
out directly from the module and carrier.

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
14
LVDS Video Connector
The COM Express carrier provides dual 18 or 24 bit LVDS display channels via P4, which are connected
directly from the COM Express module.
Function
LVDS Graphics
Location
P9
Carrier
Connector PN
DF19G-20P-1H(54) - Manufacturer: Hirose
Mating
Connector PN
DF19-20S-1C - Manufacturer: Hirose
Pinout
Pin
Signal
Description
1
+3.3 VCC_PNL
Panel Power
2
+3.3 VCC_PNL
Panel Power
3
GND
Digital ground
4
GND
Digital ground
5
LVDS_A0_N
Channel A Data
6
LVDS_A0_P
Channel A Data
7
GND
Digital ground
8
LVDS_A1_N
Channel A Data
9
LVDS_A1_P
Channel A Data
10
GND
Digital ground
11
LVDS_A2_N
Channel A Data
12
LVDS_A2_P
Channel A Data
13
GND
Digital ground
14
LVDS_CLK_N
Channel A Data
15
LVDS_CLK_P
Channel A Data
16
GND
Digital ground
17
+5 VCC_PNL [1]
Backlight Power
18
+5 VCC_PNL [1]
Backlight Power
19
GND
Digital ground
20
BKLT Control [2]
LED ADJ
[1] –+5V_VCC_PNL –This voltage can be enabled or disabled to the display via Jumper J2 position C.
[2] –BKLT Control –This signal can be connected to the COM Express backlight control pin or to GND via Jumper
J2 position D and E.

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
15
LVDS Backlight Power Connector
The COM Express Type 10 Mini Carrier carrier is equipped with a LVDS backlight inverter power supply
connector. This power supply is designed to power HDA700LPT-GHL (or similar screen type) which has
13 parallel strings of 3 series white LEDS. Each white LED has a Vf of around 3.3V.
Function
LVDS backlight Inverter power
Location
P10
Carrier
Connector PN
SM02B-BHSS-1-TB - Manufacturer: JST
Mating
Connector PN
BHSR-02VS-1 (N) - Manufacturer: JST
Pinout
Pin
Signal
1
VA LED
2
VK LED
USB 2.0 Port Connectors
The COM Express Type 10 Mini Carrier has 6 external USB 2.0 ports. Each of these are directly sourced
from the COM Express Type 10 module and do not go through any external hubs or bridges.
Function
USB 2.0
Locations
CCG010:
P14A - A signals = Port1, B signals = Port2
P14B - A signals = Port3, B signals = Port4
P14C - A signals = Port5, B signals = Port6
CCG020:
P14 - A signals = Port2, B signals = Port3
Carrier
Connector PN
98424-G52-08LF - Manufacturer: FCI
Mating
Connector PN
10073599-008LF - Manufacturer: FCI
Pinout
Pin
Signal
Description
1
A-VBUS
Port A Power (+5V)
2
B-VBUS [1]
Port B Power (+5V)
3
A-D-
Port A Data Pair
4
B-D-
Port B Data Pair
5
A-D+
Port A Data Pair
6
B-D+
Port B Data Pair
7
A-GND
Port A GND
8
B-GND
Port B GND
[1] –B-VBUS –This voltage can be disable for USB Client mode on USB port 6, just installing jumper J2 position B.

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
16
USB 3.0/2.0 Port Connectors
The maximum configuration for a Type 10 COM Express Modules allows for 2 USB 3.0 Ports with
integrated USB 2.0 Ports. However most modules currently on the market only expose a single USB 3.0
Port. The USB 3.0 signals are sourced from the COM Express Module, and run through a Pericom
Semiconductor PI3EQX7502AIZDE re-driver.
Over current protection, power supply filtering and ESD protection is also provided.
Function
USB 2.0/3.0
Location
P6
Type
Intel USB 3.0 Internal 19-pin Connector
http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-
internal-connector-cable-specification.html
Carrier
Connector
PN
ABA-USB-152-K01 –Manufacturer: Lotes
Mating
Connector
PN
Any USB 3.0 20-pin Internal Cable or Connector
CTI PN: CBG131
PUB200-2611-01-00 –Manufacturer: ICT-Lanto
Pinout
Pin
Description
Pin
Description
1
Port A - VBUS
20
-
2
Port A - SSRX-
19
Port B - VBUS
3
Port A - SSRX+
18
Port B - SSRX-
4
GND
17
Port B - SSRX+
5
Port A - SSTX-
16
GND
6
Port A - SSTX+
15
Port B - SSTX-
7
GND
14
Port B - SSTX+
8
Port A - D-
13
GND
9
Port A - D+
12
Port B - D-
10
-
11
Port B - D+

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
17
10/100/1000 Ethernet (GBE) Connector
The COM Express carrier features dual 10/100/1000 Ethernet Ports.
GBE Port 0 (P21B) is coming directly from the COM Express module.
GBE Port 1 (P21A) is coming from an Intel 82574 PCIe PHY Controller located on the carrier.
Function
LAN Connector
Locations
P21A, P21B
98424-G52-10LF - Manufacturer: FCI
Mating
Connector PN
10073599-010LF - Manufacturer: FCI
Pinout
Pin
Signal
Description
1
MX1-
Ethernet Pair 1
2
MX1+
Ethernet Pair 1
3
MX2-
Ethernet Pair 2
4
MX2+
Ethernet Pair 2
5
SHELL
RJ Shell Connection
6
SHELL
RJ Shell Connection
7
MX3-
Ethernet Pair 3
8
MX3+
Ethernet Pair 3
9
MX4-
Ethernet Pair 4
10
MX4+
Ethernet Pair 4
Software Support for the Intel 82574
Additional drivers will be needed to properly operate the GBE Port 1 on the COM Express carrier.
These drivers can be downloaded directly from Intel website from the below link:
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Ethernet+Components&Pro
ductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82574+Gigabit+Ethernet+Controller

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
18
Audio Interface Connector
The COM Express Type 10 Mini Carrier features HD Audio capabilities care of the Cirrus Logic CS4207
Codec device. From the codec 1 input (microphone) and 1 output (headphone) are available.
Function
Audio Connector
Locations
P13
Carrier
Connector PN
98424-G52-10LF - Manufacturer: FCI
Mating
Connector PN
10073599-010LF - Manufacturer: FCI
Pinout
Pin
Signal
Description
1
-
No Connect
2
-
No Connect
3
MIC-R
Mic Input - Right Channel
4
MIC-L
Mic Input - Left Channel
5
GND
Mic GND / Sheild
6
GND
Headphone GND / Sheild
7
HPOUT-R
Headphone Right Channel
8
HPOUT-L
Headphone Left Channel
Software Support for the CS4207
The audio codec used on the carrier board is the CS4207 from Cirrus Logic.
Additional drivers will be needed to properly operate audio on the COM Express carrier. Some
downloadable links can be found below.
Windows XP Driver: http://www.cirrus.com/en/pubs/software/CS4207_WinXP_1-0-0-38.zip
Windows 7/Vista Driver: http://www.cirrus.com/en/pubs/software/CS4207_WinVista_Win7_32-64-bit_6-
6001-1-30.zip
Linux Driver: Included in kernels 2.6.30 and up.

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
19
External SATA (CCG010 Only)
The COM Express Type 10 Mini Carrier features two SATA connections. SATA port 0 is routed to the
below external connector, where SATA 1 is routed to the mSATA slot.
Function
SATA host
Locations
P11
Carrier
Connector PN
Industry standard vertical entry SATA host
connector with locking capability
Mating
Connector PN
Industry SATA cable with locking tab
Pinout
Pin
Signal
1
GND
2
SATA_TX_P
3
SATA_TX_N
4
GND
5
SATA_RX_N
6
SATA_RX_P
7
GND

Connect Tech - COM Express®Type 10 Mini Carrier Board –Users Guide
Revision 0.04
20
mini PCIe & mSATA Slots
Dual Function mini PCIe mSATA Slots
The COM Express Type 10 Mini Carrier has a standard mini PCIe slot and a special dual purpose
functionality mini PCIe / mSATA slots. The dual purpose slot can accept either a mini PCIe module or a
mSATA SSD module. These slots have special circuitry that allows for the selection between connecting
PCIe lanes or SATA lanes.
Each slot is also provided with a USB 2.0 connection in addition to the PCIe as per the mini PCIe
specification; see below for a block diagram of the slots functionality.
Standard mini PCIe Slot Block Diagram (U19)
Note: SIM card is only connected to the “left” mini pcie Slot 1
PCIe / SATA Dual Functionality Diagram (U12)
** Selection between mSATA and mini pcie is done via Jumper J2 position F. (ON = mini pcie, OFF = mSATA)