Converters.TV 15107 User manual

Multi-format to HDMI scaler
ID#15107
Operation Manual

Introduction
The Digital Video Scaler has CV, SV, HD, Composite, PC, HDMI and SDI
inputs and can scale the signal into HDMI, VGA with audio output
ports plus a SDI loop out. This high per ormance digital video scaler
supports HDMI output resolution up to 1080p /WUXGA and Analog
Digital Conversion (ADC) & Digital Analog Conversion (DAC) allowing
a wide range o AV signal to be insert to a high-De inition signal and
displaying. Further, with OSD, remote, RS-232 and on-panel controls
that makes whole or this Digital Video Scaler a riendly using device.
Features
●Supports multi AV inputs to HDMI/VGA outputs
●Supports EDID and HDCP
●Supports 3D de-interlace, noise reduction and 3D Comb ilter
●Supports rame rate conversion
●Supports SDI loop out
●SDI peration at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s,
1.485/1.001Gb/s and 270 Mb/s
●Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE
292M, SMPTE 259M-C
●Supports signal input and output distanes o up to 300m or SD
signals, 200m or HD signals and 100m or 3G signals
Note: SDI cable distance tested with belden 1694A. Operating
distances may be very if used with cables f different
specificati ns.
Applications
●Lecture hall
●Meeting room
●Con erence hall
System
equirements
Input source equipments such as Blu-ray/DVD players or SDI camera,
output display and ampli ier or speaker and connection cables.

Operation Controls
and Functions
Front Panel
1. POWER & LED:
Press this button to switch ON or set the device to standby mode.
Once the device is connected with power supply the LED will
illuminate and the device will switch to ON automatically.
2. IR:
This IR window receives only the IR signal rom the remote control
included in the package.
3. INPUT button and LEDs:
Press this button sequentially to switch in between the input sources
rotationally. LED will illuminate accordingly to the selected input
source.
4. MENU:
Press this button to enter into the OSD menu.
5. -/ :
Press these buttons to scrolled down and up in the OSD selection.
6. ENTER:
Press this button to con irm the selection. Press this button together with
+ button to switch output to XGA instantly.
ear Panel
1. OUTPUT:
L/R: Connect to speaker or ampli ier or audio output in stereo ormat.
HDMI: Connect to HDMI display or ampli ier or video or video and
audio display.
OPTICAL: Connect to speaker or ampli ier or audio output in digital
ormat.

VGA: Connect to monitor/display or video output display.
2. SERVICE 1:
Reserved or actory use only.
3. SDI LOOP OUTPUT:
Connect to SDI display or SDI extender or instant SDI input signal
display or extending the SDI signal to urther area.
4. RS-232:
Connect with PC/NB and use RS-232 command to control the device.
5. SERVICE 2:
Reserved or actory use only.
6. INPUT:
SDI: Connect to SDI camera or other SDI source equipment or both
video and audio signal sending.
HDMI 1: Connect to HDMI source equipment such as Blu-ray/DVD
player or both video and audio signal sending.
HDMI 2: Connect to HDMI source equipment such as Blu-ray/DVD
player or both video and audio signal sending.
L/R: Connect to source equipment’s L/R output with 3.5Ø phone jack
or audio signal sending.
VGA: Connect with PC/NB source equipment or video signal input with
D-Sub 15pin cable.
OPTICAL: Connect to source equipment’s optical output or audio
signal sending.
YCbCr/HDPbPr L/R: Connect to source equipment such as video/
DVD player or both video and audio signal sending.
CV L/R: Connect to source equipment such as video/DVD player or
both video and audio signal sending.
SV L/R: Connect to source equipment such as video/DVD player or
both video and audio signal sending.
7. DC 5V:
Plug the power adaptor included in the package and connect it to the
AC wall outlet or power supply.

emote
1. INPUT: Press this button sequentially to
switch in between the input sources
rotationally. LED will illuminate accordingly
to the selected input source.
2. POWER: Press this button to switch ON or
set the device to standby mode. Once the
device is connected with power supply.
3. CV/SV/COMP/PC/HDMI1/HDMI2/SDI:
Press these hot keys to switch input source
instantly.
4. EXIT: Press this button to exit the menu or
the current selection under OSD.
5. MENU: Press this button to enter into the
OSD menu.
6. RESET: Press this button to set the device
back into the actory de ault setting.
7. AUTO ADJUST:
8. OK & ▲▼◄►: Press OK to con irm the
selection or press the arrow buttons to
scrolled in the OSD selections.
S-232 Protocols
ID # 15107 emote
Pin Assignment Pin Assignment
1 NC 1 NC
2 Tx 2 Rx
3 Rx ►► 3 Tx
4 NC 4 NC
5 GND ◄◄ 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 9600bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1