Converters.TV 46 User manual

SCART to YUV Converter
ID#46
Operation Manual

Introduction
This unit will enhance the picture quality of your TV by utilizing the Y, U,
V input of your TV.
Features
• It converts scart RG to YUV with RCA output jacks.
• Operates in PAL, PAL M, PAL N, NTSC, NTSC 4.43, and SECAM.
• Enhances picture quality by utilizing Y, U, V input of your TV.
• It is ideal for use with TVs that have YUV input.
Operation Controls
and Functions
Front anel
1. ower ON indicator- The LED will light up when the power is turned
on.
2. Y, B-Y, R-Y- Output- This is the output port. It will convert Y, -Y,
R-Y output signal.
3. DC power supply input- This is the power supply input port, connect
your power supply here.

Rear anel
1. Scart In- This is your RG SCART input port. Signal input to scart
jack.
Installation
The AC adaptor power unit should not be plugged into a wall outlet until
all connections are complete.
- Using your connector cable connect the RG input port (Number 5
on the rear panel) to your DVD or VCR.
- Using your connector cable connect the output port (Number 2/3/4
on the rear panel) to your plasma TV or projection TV.
- Connect your power supply adaptor to the power supply input port.
Once all connections are complete please connect the power supply
provided to the power socket
Specifications
Input signal: 1 scart jack which contains:
1 x composite video- 1Vp-p 75ohm,
1 x RG - 0.7 Vp-p 75 ohm
Output signal: 3 RCA jacks
Y: 1 Vp-p 75 ohm,
-Y: 0.7 Vp-p 75 ohm,
R-Y: 0.7 Vp-p ohm
ower supply: DC In 7.5V 500mA Centre positive

Scart inout