Costway ES10158US User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Towel Warmer
ES10158US
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk

02 03
●TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
●TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
To reduce the risk of electric shock, burns, fire, or injury:
1. Always unplug the unit from the electrical outlet immediately
after use.
2. Do not use this appliance for anything other than its intended
use.
3. Do not place or store the unit where it can fall or be pulled into
a tub or sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for a unit that has fallen into the water. Unplug it
immediately.
6. Care should be taken so that objects do not fall into and liquids
are not spilled onto the unit.
7. This unit should never be left unattended when plugged in.
8. Close supervision is necessary when this unit is used near
children or disabled persons.
9. Use this unit only for its intended use as described in this
manual.
10. Never operate this unit If It has a damaged cord or plug, if It
is not working properly, or if it has been dropped, damaged, or
dropped in water.
11. Keep cords away from heated surfaces. Do not wrap the cord
around the exterior of the appliance or let the cord hang over the
table or counter edge.
12. Do not use outdoors.
13. Do not alter the safety plug or use an extension cord with this
device.
14. Do not operate with a voltage converter.
15. Do not touch hot surfaces.
16. Do not use accessory attachments not recommended by the
manufacturer as this may cause injuries.
The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the unit's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing instructions in the
literature accompanying the unit.)
All of the safety and operating instructions should be read,
adhered to and followed before the unit is operated.
CAUTION WARNING
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
FOR ADULT USE ONLY
FOR DRY FABRIC ITEMS ONLY
SAVE THESE INSTRUCTIONS

04 05
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including
interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment. Note: This equipment
has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This unit generates, uses
and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that, interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
●Consult the customer service or an experienced radio/TV
technician for help.
1. Lid
2 Handle
3. Notch
4. Orange Light (Heating)
5. ONOFF button
6. Red light (Hot Surface)
7. Power cord export
8. Fragrance holder
FCC INFORMATION LOCATION OF PARTS AND CONTROLS

06 07
1. Remove the LID and remove any contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert the Ground Fault Safety Plug into a standard
120V AC outlet
1. Open the lid, and unscrew the lid
of the fragrance holder.
2. Keep the fragrance holder up and
put the fragrant chip.
3. Align the card position and
rotate clockwise several times.
The Towel Warmer can warm up to two oversized cotton bath
towels.
1. Insert the power cord into an electrical outlet.
2. The product will automatically tum off after 60 minutes.
3. Replace the lid.
4. Press the ON/OFF button. The orange light indicates that the
unit Is heating.
5. When the interior surface reaches 131℉/55℃, the hot surface
Indicator will light up. When lit, the interior surface of the towel
warmer is unsafe to touch.
Note: For a prolonged heating time, simply press the on/off
button after the heating indicator has turned off. This will begin
another heating cycle.
6. After the heating cycle is completed, the inner surface of the
towel warmer will remain dangerous to touch until the ‘hot
surface' indicator turns off. The towel warmer will automatically
turn off after it has completed the heating cycle.
7. Press the ON/OFF button at any time to stop or start the
heating cycle.
SET UP USING THE TOWEL WARMER

08 09
1. Use cotton or cotton blend towels or articles. Linen and Denim
also perform well In the towel warmer.
2. For fast and even heating, loosely pile 1 towel into the towel
warmer. Tightly rolled or folded towels will take longer to heat
thoroughly. 2 towels will take longer to heat than 1 towel.
3. Use only dry fabrics. Not for use with wet articles.
4. Avoid using delicate fabrics that cannot withstand high heat,
such as Acrylic, Spandex, Acetate, or Nylon. Any garment indicating
that a cool iron must be used may not be able to withstand the heat
of the towel warmer, resulting in damage to the fabric and the towel
warmer.
5. Once the heating cycle has begun, keep the lid closed. This will
prevent heat
from escaping. Opening the lid mid-cycle may result in a slower
heating time.
(Note: condensation on the lid is normal)
Remove the power cord from the electrical outlet before cleaning.
Wipe with a dry cloth.
Rated Voltage............................................................120V AC
Frequency......................................................................60Hz
Wattage Max.................................................................400W
Weight............................................................ Approx.7.6 lbs
Dimension...........................18.50”(H) x 14.17"(W) x 13.19"(D)
TIPS FOR BEST RESULTS
CARE AND MAINTENANCE
SPECIFICATIONS
FREQUENTLY ASKED QUESTIONS
Q: Why won't my Towel Warmer turn on?
A: Make sure the Towel Warmer is properly
plugged into a wall outlet
Q: Why is my Towel Warmer taking a long time
to reach optimal heating temperature?
A: Be sure to only use dry towels; using damp
towels will greatly extend the preheating cycle.