Costway honey joy TY327671 User manual

CHILDREN FOUR WHEEL ELECTRIC CAR
TY327671

Please read all instructions carefully and keep it for future reference.
Warnings:
Attention! Use it with protective equipment.
Attention! Not use it in the traffic.
Attention! The product is not suitable for the children under 3 years.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, und place the product always on a flat, steady
and stable surface.
Please use the product carefully, as the product requires great skill, avoid accidents by the
user or others, by fall or collision.
Please wear suitable protective equipment during use, e.g. protective helmet, gloves, knee
pads, elbow pads etc.
02

Fit the gasket, wheel onto the
front axle, fit the wheel cover
into the wheel.
1.Front Wheel Assembly
•Simulation Car Series
•Forward&Backward.
•Colorful Light and Wounderful Music
•Power Display.MP3 Function
Please read the operating instrucitons carefully before using.
Once using the battery car, couldnot make the battery depleted.
For your first time using the vehicle, must be sure charge the
product about 12 hours, otherwise maybe damge the battery.
Specifications Introduction:
AAA1.5Vx2 (not provided)
Input: 100-120VAC
Output: 6V500MA
37-95 Months
55lbs
43.5” x 27” x 20.5”
3-5KM/H
Charging 8-12 Hours, Using 1-2 Hours
Drive motor 6V390x1(18000RPM)
Steering motor 6V380x1(6000RPM)
6V7AH
Specifications
Item Name
Battery
Motor
Suitable Age
Max Load
Size of Car
Speed
Using Time
Charge
Battery of RC
The data here are only for reference and the samples of each
type shall apply.
gasket
03

(1WD): Fit the motor, wheel driver
on to the rear axle. Fit the wheel cover
into the wheel.
(2WD): Fit the motor, wheel driver
on to the rear axle. Fit the wheel cover
into the wheel.
Repeat for the other side.
4.windshield and mirror：
Put the wind frame to relevant
position. When hearing the
clicking sound, means connected.
3.Steering wheel：
Insert the steering wheel into
the end of the steering shaft,
connect the music connector
and power connector, insert
the screw and tighten it.
2.Rear Wheel Assembly
double drive use this
rear axle gasket
body
5.Tail Assembly:
Put the tail to relevant
position. When hearing the
clicking sound, means connected.
04

6.Seat Assembly:
Remove two screws, fit the seat
cover into the vehicle body,
insert with just two screws into it
and tighten.
Power display
Volume
H/L speed
MP3 Jack
Power switch
Forward/backward
Footboard
a:Rc-Manual Function
b:Light Function
Click the horn switch, the car will “baba", click the music switch,
the car will start playing music.
Open the power switch, the light is open, press the "forward-back"
switch to "forward" position, press the "foot pedal", the vehicle will
drive forward; press the "forward-back" switch to "back" position,
press the "foot pedal", the vehicle will back up;
if loosen the foot pedal, the car will stop.
7.The dashboard :
05