Courtyard Creations KTS7377 User manual

KTS7377
PARTS LIST
PART
NO.
MATERIAL CODE PART Q’TY
PART
NO.
MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
84
2
4
1
1
1
1
1
910
2
2
6
1
1
1
10
11
12
13
14
15
16
17
18
KTS7377-CS02-1
KTS7377-CS04-3
KTS7377-CS04-4
KTS7377-CS03-1
62KTS737DQ101
17C33A0706001Y4
17C02A0755131Y4
17C01A0714001Y4 17KAB1101----Y4
17KAA0101----Y4
17KAA0201----Y4
18060603030201
18000337001
18000C23001
17FA05040301-Y4
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
PLASTIC WASHER d6.5xD12x5
HEX.KEY WRENCH 6MM
HEX.KEY WRENCH 4MM
NUT WRENCH 10&13MMBOLT M6*40
BOLT M6*14
BOLT M6*16
CROSS BRACE
BACK ASSEMBLY
RIGHT LEG
LEFT LEG
SEAT ASSEMBLY
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Note:
The bolts on the seat assembly (#1) must be loose before
assembling the chair. See Figure 1.
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
PAGE 1 OF 2
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
Step 1:
Find the legs which marked with red circle for the adjustable
chair. Fasten the cross brace (#5) to the rear of the left leg (#2)
and the right leg (#3) by using bolts (#6) and washers (#9).
Keep the bolts loose. See Figure 2.
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
ASSEMBLY INSTRUCTIONS
4
218000337006
18000337004
BOLT CAP
BOLT CAP M6
Note:
The labels marked “L” and “R” on the legs (#2 and #3) should
coincide with Figure 2 to ensure proper assembly.
"
"
"
"
"
1
1422
TOUCH-UP PAINT
One of the keys to assembly on this chair is to put all
the screws/ bolts/ nuts on loosely at first. Once all are
in place then proceed to tighten all evenly.
FIGURE 1 FIGURE 2
#6 BOLT M6*16
16
1
23
5
9612
L
R
Adjustable
chair leg

PAGE 2 OF 2
FIGURE 3 FIGURE 4
FIGURE 5 FULL ASSEMBLY
#8 BOLT M6*40
#8 BOLT M6*40
#6 BOLT M6*16
#7 BOLT M6*14
14 40
16
Step 2:
Fasten the legs (#2 and #3) to the front of the seat assembly (#1)
by using bolts (#6 and #7) and washers (#9). Fasten the legs (#2
and #3) and the cross brace (#5) to the rear of the seat assembly
(#1) by using bolts (#8) and washers (#9 and #11). See Figure 3.
Step 3:
Place the back assembly (#4) on the seat assembly (#1).
See Figure 4.
Step 4:
Fasten the back assembly (#4) to the seat assembly (#1) by using
bolts (#8), washers (#9) and plastic nuts (#10). See Figure 5.
Step 5:
Tighten the bolts on the back of the seat assembly (#1).
Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#12, #13, and
#14). See Full Assembly.
40
1
2
3
5
9
9
6
7
12
13
814
11
4
1
10
14
94
11
9
8
14
Cleaning and Maintenance
 
on the frame parts.
 
 
 
season periods.
Note:
To repair any scratches on the frame, use the touch-up
paint (#18) provided.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
Warranty
!"
$%'+
/;