Courtyard Creations KFS777V-WM User manual

BOLT CAP
WASHER d6.5*D13*1.0
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
BOLT M6*65
BOLT M6*16
1
2
3
4
5
6
8
7
10
9
11
12
13
14
15
16
17
1
1
1
1
1
2
4
8
7
2
2
KFS777V-CS02-1
KFS777V-CS04-6
KFS777U-CS01-2
KFS777U-CS01-3
17C33A0706001Y4
17FA05040301-Y4
18000337004
PARTS LIST
PART
NO. MATERIAL CODE PART Q’ TY
FIGURE 1
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Step 1:
Place the back assembly (#1) onto a non-abrasive
surface, such as a carpet. Insert the back assembly (#1)
into the seat assembly (#2). See Figure 1.
SEAT CUSHION
PILLOW
61K777VJ00001BA
61K777VC00001BA
PAGE 1 OF 3
STOP DON’T RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until the bench is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
COURTYARD CREATIONS INC.
1
1
22
17C33A0755001Y4
KFS777V-WM
17C33A0745161Y4 BOLT M6*100
1
18000C23001 PLASTIC NUT M6*P1.0
18000337006 BOLT CAP M6 2
17KAA0101----Y4
17KAA0201----Y4
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
1
1
1
17KAB1101----Y4
NUT WRENCH 10&13MM
17C02A0755131Y4 BOLT M6*14 2

#8 BOLT M6*14
14
FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 5
Step 5:
Fasten both the left arm (#3) and the right arm (#4) to the
back assembly (#1) by using bolts (#8). Make sure that
all of the bolts have been tightened completely and cover
them with bolt caps (#11 and #12). See Figure 5.
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Figure 4 to ensure proper assembly.
16
#7 BOLT M6*16
1
3
4
1
9612
1
10 99512
22
3
L
2
7
79
9
12
12
4
R
Step 2:
At the rear of the seat, fasten the seat assembly (#2)
to the back assembly (#1) by using bolts (#6) and
washers (#9). Keep the bolts loose. See Figure 2.
Step 3:
Fasten the seat assembly (#2) to the back assembly
(#1) by using bolts (#5) washers (#9) and plastic nuts
(#10). Keep the bolts loose. See Figure 3.
Step 4:
Fasten both the left arm (#3) and the right arm (#4) to
the seat assembly (#2) by using bolts (#7) and washers
(#9). Keep the bolts loose. See Figure 4.
PAGE 2 OF 3
100
#5 BOLT M6*100
8
11
#6 BOLT M6*65
65
STOP DON’T RETURN TO STORE!

Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
•Cushions may be washed on the surface only by using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your bench.
•In order to prolong the life and beauty of your bench, we recommend that it be stored in a dry and protected
area during off season periods.
FIGURE 6 Step 6:
Place the cushions (#17) and the pillows (#16) onto the
bench. Secure the cushions to the bench by using the
plastic clamps. See Figure 6.
17
17
16
16
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
PAGE 3 OF 3
STOP DON’T RETURN TO STORE!