Courtyard Creations Easton KTS6057 User manual

KTS6057
COURTYARD CREATIONS INC.
!
!
!
!
PAGE 1 OF 2
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Do not discard any of the packaging until you have checked that you have all the parts and pack
of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by
children. Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1
2
3
1
1
4
4
5
6
7
2
4
2
1
KTS6057-CS01
KTS6057-CS02
17C01A0712001Y4
17FA05040301-Y4
18000337001
17KAA0101----Y4
BASE ASSEMBLY
BOLT M6*35
WASHER d6.5*D13*1.0
BOLT CAP M6
HEX.KEY WRENCH 4MM
SEAT ASSEMBLY PLASTIC CAP
1808010205301
FIGURE 1
Step 1:
At the front of the chair, fasten the seat assembly
(#1) to the base assembly (#2) by using bolts (#3)
and washers (#4). Keep the bolts loose.
See Figure 1.
3
4
5
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Easton 5PK Padded Spring Action Sling Chairs
1
2

PAGE 2 OF 2
FIGURE 2 FULLASSEMBLY
Step 2:
At the back of the chair, fasten the seat assembly
(#1) to the base assembly (#2) by using bolts (#3)
and washers (#4). See Figure 2.
Make sure that all of the bolts have been tightened
completely, and then cover them with plastic caps
(#5) and bolt caps (#6).
Step 3:
See Full Assembly.
Cleaning and Maintenance
•Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry frame completely. Do
not use bleach, acid, or other solvents on the frame parts.
•We recommend the use of furniture covers when not in use.
•Please inspect and tighten all bolts or fasteners on a regular basis to ensure proper performance and
safety of your chair.
•In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and
protected area during off season periods.
3
462
1
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANYSMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULDYOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1- MODEL NUMBER OF THEPRODUCT.
2- PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingA Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]