Courtyard Creations KFS562F-WM User manual

KFS562F-WM
#9 BOLT M6*20
20
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure
proper assembly.
Step 1:
Insert one seat assembly (#1) into the right leg
(#4) and the leg A (#2). Fasten them together by
using bolts (#9) and washers (#11). Keep the bolts
loose. See Figure 1.
Note:
The number labels “2, 3, 4, 5” attached on the
legs should coincide with Figure 1, 2, 3 & 4 to
ensure proper assembly.
COURTYARD CREATIONS INC.
PAGE 1 OF 3
FIGURE 1
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1 2
1
1
1
1
2
7
8
2
2
8
4
1
12
12
9
10
11
12
13
61K562FX00001BA
61K562FY00001BA
17C33A0708001Y4
17C33A0703001Y4
17FA05040301-Y4
18000337004
17KAA0101----Y4
2
3
4
5
6
KFS562F-CS01
KFS562F-CS02
KFS562F-CS03
KFS562F-CS04
KFS562F-CS05
61K562FJ00001BA
SEAT ASSEMBLY
BACK CUSHION
SEAT CUSHION
BOLT M6*20
BOLT M6*12
WASHER d6.5*D13*1.0
BOLT CAP
HEX.KEY WRENCH 4MM
LEG A
LEG B
RIGHT LEG
LEFT LEG
PILLOW
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
STOP DON’T RETURN TO STORE!
42
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]

STOP DON’T RETURN TO STORE!
PAGE 2 OF 3
FIGURE 4
#9 BOLT M6*20
FIGURE 3
#10 BOLT M6*12
Step 2:
Fasten the back to the legs (#2 and #4) by using
bolts (#10) and washers (#11). Make sure that all
of the bolts have been tightened completely and
cover them with bolt caps (#12). See Figure 2.
Step 3:
Insert the other seat assembly (#1) into the left leg
(#5) and the leg B (#3). Fasten them together by
using bolts (#9) and washers (#11). Keep the bolts
loose. See Figure 3.
Step 4:
Fasten the back to the legs (#3 and #5) by using
bolts (#10) and washers (#11). Make sure that all
of the bolts have been tightened completely and
cover them with bolt caps (#12).See Figure 4.
FIGURE 2
20
12
#10 BOLT M6*12
12
4
2
35
3
5

STOP DON’T RETURN TO STORE!
PAGE 3 OF 3
A B C
Step 5:
Attach the two chairs together by following these
steps:
A: Place the lock handle through one of the
fasteners.
B: Insert the handle intp the other fastener.
C: Rotate the handle so that it is 90 degrees to the
seat.
Step 6:
Turn the chair to its upright position. Place the
cushions (#7 and #8) and pillows (#6) onto the
chair.Secure the cushions to the chair by using
the velcro straps. See Figure 6 & 7.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and
water, rinse thoroughly, and dry completely. Do
not use bleach, acid,or other solvents on the
frame or fabric parts.
• Cushions may be surface washed with mild
soap and water if necessary. Commercial
foaming upholstery cleaner may also be used.
Rinse well and hang to dry. Do not machine
wash or dry.
• We recommend the use of furniture covers to
protect your chairs when not in use.
• Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance
and safety of your chair.
• In order to prolong the life and beauty of your
chair, we recommend that the chair be stored in
a dry and protected area during off season
periods.
FIGURE 5
FIGURE 6
FIGURE 7
3
2
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.