Courtyard Creations XTM0119-WM User manual

XTM0119-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
SUPPORT
LEG
SEATASSEMBLY
BOLT M6*16
BOLT M6*14
BOLT M6*30
6 4 12 1
17C33A0706001Y4 17KAA0201-Y4
WASHER d6.5*D13*1.0
BOLT CAP
BOLT CAP M6
BOLT CAP M6
HEX.KEY WRENCH 6MM
HEX.KEY WRENCH 4MM
1 1 7 8
17FA05040301-Y4XTM0119-CS01
2 2 8 4
18000337002XTM0119-CS02
3 2 9 4
1800033700662XTM0119Q101
FIGURE 1
Step 1:
Place the seat assembly (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Fasten the legs (#2) to the seat assembly
(#1) by using bolts (#4) and washers (#7). Keep the
bolts loose. See Figure 1.
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
COURTYARD CREATIONS INC.
PAGE 1 OF 2
STOP DON’T RETURN TO STORE!
PART
NO. MATERIAL CODE PART Q’TY
Attention:
Make sure that all bolts needed for each step match
the corresponding figure to ensure proper assembly.
1
2
2
4
7
8
!
!
!
!
4 4 10 4
1800033700417C01A0710002Y4
5 4 11 1
17KAA0101-Y417C02A0755131Y4
#4 BOLT M6*30
30
A
Note:
The position of legs (#2) displayed in Illustration Awill
result in improper assembly.

FIGURE 2
FIGURE 3
Step 3:
Turn the ottoman to its upright position. See Figure 3.
PAGE 2 OF 2
STOP DON’T RETURN TO STORE!
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANYSMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingA Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
Make sure that all of the bolts have been tightened
completely, and then cover them with bolt caps (#8, #9
and #10).
Step 2:
Fasten the supports (#3) to the legs (#2) by using bolts
(#5 and #6) and washers (#7). See Figure 2. 56
7
9
10
#6 BOLT M6*16
16
14
#5 BOLT M6*14
2
2
3
3
Cleaning and Maintenance
• Wash frame parts and fabric with mild soap and water,
rinse thoroughly. Dry frame completely. Do not use
bleach, acid, or other solvents on the fabric or frame
parts.
• We recommend the use of furniture covers to protect
your ottomans when not in use.
• Please inspect and tighten all bolts or fasteners on a
regular basis to ensure proper performance and safety
of your ottoman.
• In order to prolong the life and beauty of your ottoman,
we recommend that the ottoman be stored in a dry and protected area during off season periods.
Note:
The position of supports (#3) displayed in Illustration B
and Illustration C will result in improper assembly.
B
C