Courtyard Creations KTS126P-WM User manual

ASSEMBLY INSTRUCTIONS
KTS126P-WM
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART
NO. MATERIAL CODE PART Q’TY
1
2
3
4
1
2
2
2
7
6
8
9
10
2
2
2
1
1
KTS126P-CS01
WHEEL
CHAIR ASSEMBLY
1800113003---03
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
PAGE 1 OF 2 COURTYARD CREATIONS INC.
BOLT M8*100
17C01A0845011Y4
WASHER d8.5*D17*1.6
17FA08060601-Y4
PLASTIC NUT M8*P1.25
PLASTIC WASHER
1800C06001
1800682001---03
HEX.KEY WRENCH 6MM
NUT WRENCH 13&17MM
PLASTIC CAP
17KAA0201----Y4
17KAB1201----Y4
FIGURE 1
Step 1:
Fasten the wheels (#2) to the rear legs of the chair
assembly (#1) by using bolts (#3), bushings (#4), plastic
washers (#5), washers (#6), and plastic nuts (#7). Make
sure that all of the bolts have been tightened completely
and then cover them with plastic caps (#8).
See Figure 1.
1
2
2
3
5
64
7
8
2
18001BW002---03
52
!
!
!
!
BUSHING
1800682002---03

STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANY SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THE ITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingA Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
FIGURE 2
Step 2:
Rotate the back assembly as shown in Figure 2.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly. Dry frame completely. Do not use
bleach, acid, or other solvents on the fabric or frame parts.
• Fabric may be washed on the surface only with mild soap and water if necessary. Commercial
upholstery cleaner may also be used.
• Furniture covers are recommended to protect your lounge when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure proper functioning and safety
of your lounge.
• In order to prolong the life and beauty of your lounge, we recommend that it be stored in a dry and
protected area during off season periods.