Courtyard Creations KUS128D-WM User manual

Attention:
Make sure that all bolts needed for each step matches
the corresponding figure to ensure proper assembly.
Step 1:
Insert the rear seat (#1) into the legs (#2 and #3).
Fasten the legs (#2) to the rear seat (#1) by using bolts
(#5) and steel washers (#7). See Figure 1.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
PART
NO. MATERIAL CODE PART Q’TY
FIGURE 1
2
1
510
7
KUS128D-WM
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
1
1
1
1
1
4
2
4
4
2
4
2
1
1
1
1
KUS128X-CS01
KUS128D-CS01
KUS128D-CS02
KUS128X-CS03
KUS128D-CS03
17C02A0712003Y4
17C01A0714003Y4
17XA3309
17FA05040301-Y4
18000C23001
18000337006
18000337002
17KAA0201----Y4
17KAB1101----Y4
61K128DX00001BA
61K128DY00001BA
REAR SEAT
FRONT SEAT
BACK ASSEMBLY
BOLT M6*35
BOLT M6*40
STEEL WASHER
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
BOLT CAP M6
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BACK CUSHION
SEAT CUSHION
PAGE 1 OF 2 COURTYARD CREATIONS INC.
STOP DON’T RETURN TO STORE!
35
#5 BOLT M6*35
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
Note:
1.The labeled arrow marks on the legs (#2) should
coincide with Figure 1 to ensure proper assembly.
RIGHT LEG
LEFT LEG
R
L
3
2.The labels marked “L” and “R” on the legs (#2 and #3)
should coincide with Figure 1 to ensure proper assembly.
8

40 12
10 9
97
#7 BOLT M6*40
Step 2:
Insert the rear seat (#1) into the front seat (#4). Make
sure that the spring clips on the rear seat (#1) come
through the holes on the front seat (#4). See Figure 2.
Step 3:
Fasten the back assembly (#5) to the rear seat (#1) by
using bolts (#7), washers (#9), and plastic nuts (#10).
Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#11 and
#12). See Figure 3.
Step 4:
Place the cushions (#15 and #16) onto the lounge.
Secure the cushions to the lounge by using the plastic
clamps. See Figure 4.
Cleaning and Maintenance
•Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
•Cushions may be washed on the surface by only
using mild soap and water or commercial foaming
upholstery cleaner if necessary. If washed, rinse well
and hang to dry. Do not machine wash or dry.
•We recommend the use of furniture covers when not
in use.
•Inspect and tighten all bolts and fasteners on a
regular basis to ensure the proper performance and
safety of your lounge.
•In order to prolong the life and beauty of your lounge,
we recommend that it be stored in a dry and protected
area during the off season periods.
FIGURE 2
1
4
FIGURE 3
FIGURE 4
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
5
1
15
16
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
TO THERETAILER.PRODUCT