Courtyard Creations RUS014K User manual

1
PARTS LIST RUS014K
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Insert the right and left arms (#1 and #2) into the cross
braces (#3) on both sides. Fasten them together by using
bolts (#6), washers (#9), and plastic nuts (#10). Keep the
bolts loose. See Figure 1.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 3 COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the glider is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Q’TY Q’TY
2
3
4
5
6
7
1
1
10
9
2
1
1
FIGURE 1
1
13
3
3
11 11 11
11
3
10
9
9
6
11
Arm
Assembly
R
RUS014G-CS01
RUS014G-CS02
62RUS023DH101
RUS014G-CS03
RUS014G-CS04
17C01A0710002Y4
17C01A0719072Y4
17FA05040301-Y4
18000C23001
18000337002
61R014KC00001BA
17KAA0201----Y4
17KAB1101----Y4
RIGHT ARM
LEFT ARM
CROSS BRACE
BOTTOM FRAME
SEAT ASSEMBLY
BOLT M6*30
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BOLT M6*55
32
12
16
2
1
1
4
4 14
13
12
11
CUSHION
Note:
The labels marked “L” and “R” on the arms (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
!
!
!
!
!
30
#6 BOLT M6*30
L
2
2
STOP DON’T RETURN TO STORE!
8 4
17C01A0725101Y4
BOLT M6*75
PART
NO. MATERIAL CODE PART PART NO. MATERIAL CODE PART

#8 BOLT M6*80
FIGURE 2
11 22
4
55
1
2
4
FIGURE 3
FIGURE 4 FIGURE 5
FIGURE 6
14 14
Step 2:
Place the arm assembly onto the bottom frame (#4). Make
sure that the higher tube on the bottom frame (#4) is facing
towards the front of the glider. See Figure 2.
Step 3:
Fasten the swing bars on the arm assembly to the bottom
frame (#4) by using bolts (#7), washers (#9), and plastic nuts
(#10). Keep the bolts loose. See Figure 3.
Step 4:
Place the seat assembly (#5) onto the arm assembly.
See Figure 4.
Step 5:
Fasten the seat assembly (#5) to the right and left arms (#1
and #2) by using bolts (#8), washers (#9), and plastic nuts
(#10). Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#11). See Figure 5.
PAGE 2 OF 3
Step 6:
Place the cushions (#14) onto the seat assembly. Secure the
cushions to the seat assembly by using the velcro straps.
See Figure 6.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
• Cushions may be washed on the surface only by using mild
soap and water or a commercial foaming upholstery cleaner
if necessary. If washed, rinse well and hang to dry. Do not
machine wash or dry.
• We recommend the use of furniture covers to protect your
glider when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis
to ensure the proper performance and safety of your glider.
• In order to prolong the life and beauty of your glider, we
recommend that it be stored in a dry and protected area
during off season periods.
FRONT HIGHER
TUBE
55
7
7
9
9999
999
11
11
10
10
#7 BOLT M6*55
75
#8 BOLT M6*75
8
811
9
9
10
11
9
STOP DON’T RETURN TO STORE!

PAGE 3 OF 3
STOP DON’T RETURN TO STORE!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Warranty
•This product is covered by Courtyard Creations Inc. One–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from over service center.