Courtyard Creations XLS005M-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
XLS005M-WM
Weight limit for each shelf is 25kg or 55lbs.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
PAGE 1 OF 3 COURTYARD CREATIONS INC.
"
"
"
"
"
"
STOP DON’T RETURN TO STORE!
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
11
2
3
4
5
7
8
9
10
12
1
10
2
1
2
8
1
1
2
XLS005M-CS04-4
XLS005M-CS04-3
62XLS005MB101
47LA66189
47LA66188
17C01A0706001Y4
17C33A0709001Y4
18000337001
17FA05040301-Y4
17KAA0101----Y4
RIGHT LEG
LEFT LEG
BACK FRAME
MESH FRAME A
MESH FRAME B
BOLT M6*16
BOLT M6*25
HEX.KEY WRENCH 4MM
BOLT CAP M6
WASHER d6.5*D13*1.0
FIGURE 1
1
Step 1:
Put the back frame (#3) into the holders located on the
legs (#1, #2) by using bolts (#8) and washers (#9). Keep the
bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on the legs (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
R
2
3
8
11
9
L
11 8
18000337004
BOLT CAP
FIGURE
1
1
R
2
3
L
61
62XLS005MC101
UPPER STORY BACK
25
#8 BOLT M6*25

PAGE 2 OF 3
STOP DON’T RETURN TO STORE!
Cleaning and Maintenance
Ǹ Wash frame parts with mild soap and water, rinse thoroughly,
and dry completely. Do not use bleach, acid, or other solvents
on the frame parts.
Ǹ
Inspect and tighten all bolts and fasteners on a regular basis
to ensure proper performance and safety of your stand.
ǸWhen moving the stand, lift. Do not drag this stand.
Ǹ
We recommend the use of furniture covers when not in use.
ǸIn order to prolong the life and beauty of your stand, we
recommend that it be stored in a dry and protected area
during off season periods.
Step 6:
See Full Assembly.
FULL ASSEMBLY
FIGURE 2 FIGURE 3
Step 3:
Put the mesh frame B (#5) into the holders located on the
legs (#1, #2).
See Figure 3.
Step 4:
Fasten the upper story back (#6) to the legs (#1, #2) by using
bolts (#8) and washers (#9). See Figure 4.
Step 5:
Put the mesh frame B (#5) into the holders located on the
legs (#1, #2).
Make sure that all of the bolts have been
tightened completely and cover them with bolt caps (#10, #11).
See Figure 5.
FIGURE 5
Step 2:
Put the mesh frame A (#4) into the holders located on the
legs (#1, #2) by using bolts (#7) and washers (#9). Keep the
bolts loose. See Figure 2.
FIGURE 4
7
4
11
112
2
5
5
1
2
2
6
2
2
5
5
4
10
9
RE
3
1
2
5
1
2
6
811
9
5
1
5
LY
16
#7 BOLT M6*16
25
#8 BOLT M6*25

PAGE 3 OF 3
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
STOP DON’T RETURN TO STORE!