Crestron ZUMLINK-CONV-CN User manual

The Crestron® Zūm® Wired ZUMLINK-CONV-CN adapter cable allows
Zūm wired devices with Zūm Link communication to integrate via
Cresnet® for legacy controls. The plenum-rated adapter converts a
single female RJ-45 Zūm Link port connection to use on the Cresnet
network. Cresnet screw terminals provide a contact closure input with
the ability to trigger Zūm devices into Emergency Override mode. For
flexible in-room wiring, daisy chain Zūm Link with the
ZUMLINK-SPLTR-RJ45 RJ-45 splitter to avoid dead ends.
In the Box
1 ZUMLINK-CONV-CN Zūm® Wired Adapter Cable for
Cresnet® Devices
ZUMLINK-CONV-CN
Zūm® Wired Adapter Cable for Cresnet® Devices
1

Connections
The ZUMLINK-CONV-CN integrates Cresnet devices into a Zūm system.
Use the Zūm link cable (CBL-CAT5E-ZUMLINK-P) to connect the RJ-45
port to Zūm link sensors and keypad. Connect the Cresnet terminal
block to legacy Cresnet lighting products, including a SpaceBuilder®
system (such as the CL-SPACEBUILDER-DIN) or traditional processor
panel.
Cresnet Terminal Block Connections
Terminal Description
24 24V power
Y Data terminal pass-through only
Z Data terminal pass-through only
G Ground
Emergency Override Terminal Block Connections
Terminal Description
24 24V power
O Emergency override
W Future use
G Ground
2
ZUMLINK-CONV-CN QuickStart
Zūm® Wired Adapter Cable for Cresnet® Devices

Application
The following diagram is a sample application.
Integrating a Legacy Lighting System into a Zūm System
3
ZUMLINK-CONV-CN QuickStart
Zūm® Wired Adapter Cable for Cresnet® Devices

Visit the Product Page
Scan the QR code to visit the product page.
ZUMLINK-CONV-CN
www.crestron.com/model/6512025
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, Cresnet, SpaceBuilder and Zūm are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may be used in
this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc ID 9156A
11/15/21
4
ZUMLINK-CONV-CN QuickStart
Zūm® Wired Adapter Cable for Cresnet® Devices