Crivit 78791 User manual

DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 02/2013
Delta-Sport-Nr.: DS-URBAN102
IAN 78791IAN 78791
OPEN-FACE HELMET
Open-Face Helmet
Instructions for Use
Jethelm
Bedienungsanleitung
Before reading, fold out the illustration page and get to know all of the functions of your unit.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Artikels vertraut.
GB Instructions for Use 5
DE/AT/CH Bedienungsanleitung 11

DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 02/2013
Delta-Sport-Nr.: DS-URBAN102
IAN 78792IAN 78792
OPEN-FACE HELMET
Open-Face Helmet
Instructions for Use
Jethelm
Bedienungsanleitung
Before reading, fold out the illustration page and get to know all of the functions of your unit.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Artikels vertraut.
GB Instructions for Use 5
DE/AT/CH Bedienungsanleitung 11

DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 02/2013
Delta-Sport-Nr.: DS-URBAN102
IAN 78793IAN 78793
OPEN-FACE HELMET
Open-Face Helmet
Instructions for Use
Jethelm
Bedienungsanleitung
Before reading, fold out the illustration page and get to know all of the functions of your unit.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Artikels vertraut.
GB Instructions for Use 5
DE/AT/CH Bedienungsanleitung 11

174
A
D
G
B
E
H
C
F
I

5
Instructions for Use
Parts Overview ......................................................................6
Scope of Delivery ....................................................................6
Important Information .................................................................6
Instructions for Use
Safety Advice ......................................................................6
Product Characteristics............................................................ 7 - 8
Use and Installation Instructions
Inner Lining ........................................................................8
Snap-Fastener System ...............................................................8
Cheek Pads .......................................................................8
Acoustic Damping ..................................................................8
Top Vent ..........................................................................8
A.I.R. ventilation system ..............................................................8
Visor Replacement ..................................................................8
Selecting the correct helmet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance and Care................................................................9
Storage ............................................................................9
Disposal Instructions ..................................................................9
3 Years Warranty ...................................................................10
GB

6GB
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following operating instructions. Use the product
only as described and only for the given areas of
application.Keep these instructions safe. When
passing the product on to a third party, always
make sure that the documentation is included.
Parts Overview
1Top vent
2A.I.R. ventilation system
3Visor mechanism
4Air exhaust
5Chin straps with snap fastener
6Visor
7Cheek pads
8Acoustic damping
9Inner Lining
Scope of Delivery
The scope of delivery for your helmet consists of
the following:
•Acousticdamping
•Helmetbag
•Instructionmanual
Important Information
Our helmets are manufactured in accordance
with the latest technology and are specifically
designed for motorcycling.Whether the owner
deems them to be suitable for any other use, is up
to him. Wearing a helmet does not exclude the
possibility of injury should an accident occur.
To guarantee adequate protection this helmet
must be well fitting and securely fastened. Every
helmet that is exposed to a hard blow must be
replaced.
We guarantee that this item is free of production
and material defects. The guarantee does not
apply to normal wear and tear and in case of
improper use.
Instructions for Use
Safety Advice
• T h e retentionsystemmustalwaysbecarefully
set and locked.
• A l w a y sensurethatthereisnoairflowrestric-
tion inside the helmet.
• E n s u r ethatyourvisoriscleanandscratch-free
at all times. Never use smoked visors at night
or when visibility is poor. Exchange damaged
visors for a genuine replacement immediately.
Your safety is at risk.
You are able to obtain replacement visors from
the stipulated service address for a period of
5years from the purchase date.
Visor type: DS-URBAN102
•Nevermakeanychangestoanypartofyour
helmet. Do not make any alterations to the
outer shell, do not insert screws.
• T h e helmetmaynotbepaintedorhavestickers
or labels.
• T h e helmetisdesignedtoabsorbtheenergy
of a blow or a collision by destroying some
of its components. In case of a further blow it
wouldn’t protect you any longer. After an acci-
dent, the helmet must be replaced even though
it doesn’t show external damages.
• R e f r a i n fromtransportingyourhelmetbyhang-
ing it onto any part of your motorcycle. Keep it
away from exhaust pipes and other sources of
heat.
•Neverusesolvents,petrolorotherdetergents
when cleaning the shell and interior of your hel-
met.OnlyusewaterandpHbalancedsoap.
The padding can be cleaned using soap and a
small brush. The visor should be cleaned with
soap and water only, leave it to air-dry. Do not
expose the visor to any source of heat!
• O n l y usegenuinesparepartsforyourhelmet.

7GB
Product Characteristics
ECE-R 22.05 Homologation
This helmet is in compliance
with ECE-R 22.05 standards
and is homologised according-
ly. The ECE-R 22.05 standard
consists of uniform conditions
for the approval of protective
helmets and its visors for drivers and passengers
of motorcycles and mopeds. The basic principles
for these tests are the so called ECE-Regulations
of the Economic Commission for Europe.
Significant Tests of the
ECE-Regulation 22.05
•Shockabsorbance
•Dynamictestofwearfeatures
•Fieldofvisiontest
•Designstrength
•Sustainabilitytest(Strip-offtest)
•Chinstrapsandlocktest
•Sheartestforoutsideedges
•Frictionperformancetestoftheoutershell
•Visortest
(mechanicalandvisualcharacteristics)
TÜV certified wearing comfort
The TÜV Rhineland evaluates
performance and comfort of
helmets by means of test sub-
jects. Only helmets that meet
these stringent requirements
are awarded the desired logo.
Aspects such as aerodynamics, acoustics, ventila-
tion, comfort and fit are rated.
Toxproof
The Toxproof-sign of the Techni-
calInspectionAuthority(TÜV)
Rhineland identifies products
that have been tested for toxic substances where
no health hazards can be expected according to
the perception of today.
Inside Padding with
Coolmax®Inserts
Coolmax®by INVISTA is a
high-performance fabric fibre
that supports its wearers during sport activities.
Based on the patented DuPont-fibre technology,
Coolmax®transports moisture from the body to
the fabric surface where it dries quicker than with
any other fabric.
The specially developed fibres of INVISTA that
are used for Coolmax®-fabrics transport the mois-
ture away from the body to the surface of the
fabric where it has the opportunity to evaporate
quickly. At the same time, the uniquely formed
fibres offer maximum breathing activity, even in
wet conditions. In addition, the breathing activity
improves the heat regulating effect.
Cheeks, forehead and neck pads of this article
are equipped with Coolmax®.
HeiQ®Pure dynamiq
PURE Textile freshness
Experience the feeling of
lasting freshness through the
power of silver, keeping you
odour-free all day lang.
ADAPTIVE Thermal control
Feel good all over. The textile will cool you down
when you’re hot, and keep you dry longer in cold
weather.Cools and minimises perspiration.

8 GB
Anti-Scratch
The built-in visor features a
special coating to minimise
scratches. This coating prevents
rapid scratching of the external
part of the visor.
Construction for those who
wearglasses
The helmet is also suitable for those who wear
glasses. An extra soft padding improves the
wearing comfort for those who wear glasses.
HCM Technology
HighDensityCopolymer
Matrix:HighqualityABS
plastic is formed under extreme heat and
pressure to make a robust and impact-resistant
outer shell.
A.I.R. ventilation system
Newly developed A.I.R.
ventilation system – with the
ventilation flaps opened, nega-
tive pressure draws out warm air.
Use and Installation
Instructions
Inner Lining
Theinnerlining(9)canbecompletelyremoved
andcleanedseparately(seecareinstructions).
To remove the inner lining loosen the neck guard
connected to the inner pad and pull the inner
padclipsoutofthefrontofthehelmet(see
Fig.A).
Snap-Fastener System
The snap-fastener enables an individual and
quick vernier adjustment of the chin strap.
Press the snap-fastener together until the helmet is
sittingcomfortablybutfirm(seeFig.B).
By means of the snap at the end of the chinstrap,
the excess chinstrap can be attached to addition-
ally secure it.
Cheek Pads
Thecheekpads(7)areaffixedviathreepress-
studs respectively in the helmet. You can easily
removethepads(seeFig.C).
When securing the cheek pads inside the helmet
you must hear every press stud click in.
Acoustic Damping
Theacousticdamping(8)isfornoisereduction,
in particular when driving at high speeds.
Press the acoustic damping into the cavity of
thecheekpads(seeFig.D).Theacousticside
pad equipped with Velcro faces towards the
helmetshell.
Top Vent
Thetopvent(1)canbeopenedandclosedby
meansofaslider(seeFig.E).
A.I.R. ventilation system
OpenandclosetheA.I.R.ventilationsystem(2)
withaslide(seeFig.F).
Visor Replacement
Removing the visor
Turn the outer covers counter-clockwise to release
(seeFig.G).Removethevisor,beingcarefulnot
to lose the control elements.The control elements
are marked L and R.
Installing the visor
Place the visor onto the inner control element,
then press the outer control element into the
designated holder. The arrow on the control ele-
ment should point up. Be sure to place the control
elementmarked“L”attheleftofthehelmet(see
Fig.H).
Lastly, insert the cover into the opening and se-
cure by turning a quarter clockwise turn. Be sure
thelogoiscorrectlypositioned(seeFig.I).

9GB
Selecting the correct
helmetsize
•Chooseyourhelmetbymeasuringthecir-
cumference of your head with a flexible tape
measure. Always try on a couple of different
sizes before buying a close fitting helmet.
When wearing the helmet, the skin of your
temples should ideally move with it.
•Makesurethatthehelmetdoesnotmove
around when the retention system is open.
•Theretentionsystemmustbesetsecurely.The
chinstrap must sit comfortably under the chin
as far back towards the neck as possible.
Fasten it as tight as possible. The right degree
of tension is reached once you find it difficult
to insert your finger between the chinstrap and
neck, yet finding it easy to breath and swallow.
Make sure that the helmet sits securely once
the retention system is on. Make sure that the
helmet does not restrict your movements, e.g.
when turning your head to look behind you.
•Makesurethehelmetcarriesastickercertify-
ing homologation.
Maintenance and Care
Regular maintenance and care contributes to
safety and maintaining the helmet.
Cleaning of the Helmet
•Neverusesolvents,petrolorotherdetergents
when cleaning the shell and interior of your
helmet.
•OnlyusewaterandpHbalancedsoap.
Visor care and cleaning
•Afterusingthehelmet,lightlywipeoffany
grime(e.g.deadinsects,dirt,sand,dustetc)
from the visor with a soft cloth and then fully
wipe it clean using a dry soft cloth.
•Whenthevisorgetswet(e.g.rainwater)it
should always be wiped with a soft cloth.
•Whencleaningthevisor,neveruseanypetro-
leum-based solvents or detergents containing
abrasives.
Cleaning of the Cheek Pads,
Acoustic Pads and Inside Pads
•Handwashbelow30°C.
•Allowtodryatroomtemperature.
•Avoidsourcesofheat.
•Whennotinuse,storeinadry,wellventilated
place.
Storage
When not in use, store the helmet in a dry and
well ventilated place at room temperature.
Avoid sources of heat. Do not needlessly expose
the item to heat, e.g. in the car in hot outside
temperatures.
Disposal Instructions
Dispose of the product and all its components
through a licensed disposal company or your
municipal disposal facilities.Please observe the
current regulations. If in doubt, consult your dis-
posal facility about an environmentally friendly
disposal.
Size table
Size Head circumference
M 57 – 58 cm
L 59 – 60 cm
XL 61 cm

10 GB
3 Years Warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.We
will be personally available to discuss the situa-
tion with you.
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
Size M IAN: 78791
Size L IAN: 78792
Size XL IAN: 78793
Service Great Britain
 Tel.: 08715000720(£0.10/Min.)
E-Mail: [e-mail]