Crouzet SSR Assembly instructions

INSTALLATION SHEET
MOUNTING INSTRUCTIONS PART NUMBER NOMENCLATURE
SSR - PANEL MOUNT
LOW PROFILE
GNZ
AC OUTPUT
CROUZET SOLID STATE RELAYS - PANEL MOUNT PRODUCTS have been developed to offer all the advantages of electronic switching technology. The low profile 12.5 mm
height industrial housing is quick to install. The product is compact and reliable. Please refer to the data sheet available on www.crouzet.com
Panel mount - AC Output Single Phase
• 8A SSR for low-profile applications
• Fast-on terminals for easy installation
in applications that control resistive loads
and inductive loads
1. Select the adequate heatsink (see thermal curves on product datasheet).
2. Use thermal grease between the SSR and heatsink (0.06 mm of thickness).
3. Two screws (Ø 4x12 mm are needed to mount the SSR on the heatsink.
4. For optimal thermal performance heatsink fins should be oriented vertically
to promote the perfect convection airflow.
1. Before mounting the SSR, locate the panel
section. The surface must provide adequate
heat sinking capability - preferably aluminum,
uncoated, flat and clean.
2. Recommended to use a thermal grease
between the SSR and the panel.
3. SSR mounting slots have a diameter of 5 mm.
Please use two screws to mount on the panel.
4. Be sure to tighten both screws until they
contact the baseplate before
applying full torque (1.2 Nm).
• Zero Cross Turn-On and Instantaneous (Random)
• cRUus, CE and UKCA Recognized
MOUNTING ON PANEL
For more information please go to www.crouzet.com
8413 2 1 1 0 N
8413:
Single
Phase
2: Low
Profile
N: New1: Instantaneous
(Random)
2: Zero Cross
1: 8A 0: 4-32 V c
Channels Layout
Switching
Type
Output
Current
Control
Voltage Generation
WARNING: The user should protect heat sensitive materials as well as
people against any contact with the heatsink. For correct cooling, the SSR needs
air convection. Less air convection produces an abnormal heating. In the event
there is no space between two SSRs, reduce the load current. Forced cooling
(ex. fan inside the cabinet) significantly improves the thermal performance.
Heatsink temperature should never exceed 90 °C.
!
GNZ
C.MC.DEF.00886.EN
!
4
2
1
3
M4 x 12 mm / 1.2 Nm mini
ON HEATSINK
≤ 80°C
WIRING DIAGRAMS
GNZ
4/A2(-)
L
O
A
D
V
3/A1(+)
AC
1/L1 2/T1
1. Protection Equipment
RECOMMENDED ACCESSORIES
WARNING
Screws
Heatsink Mounting
Thermal Grease
Heatsink Mounting
P/N
26532001
26532003
TYPE DESCRIPTION
Screw Mounting Kit
Thermal Grease
1
1

INSTALLATION SHEET
SSR - PANEL MOUNT
LOW PROFILE
For more information please go to www.crouzet.com
C.MC.DEF.00886.EN
WARNING
DANGER
IMPORTANT CONSIDERATIONS TRANSIENT VOLTAGE
Electrical equipment should be installed, operated, serviced and maintained only by qualified
personnel. No responsibility is assumed by Crouzet for any consequences arising out of use of this
manual. Be sure to use input and output voltage within operating ranges.
WARNING: The product’s side panels may be hot, allow the product to cool before touching.
Please follow mounting instructions. Failure to follow these instructions can result in serious injury
or equipment damage.
RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• Confirm that the product power supply voltage and its tolerances are compatible
with those of the electrical network.
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product.
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Turn off power supply before working on this equipment.
Failure to follow these instructions can result in death, serious
injury or equipment damage.
In AC power lines, transient voltages are common and may pose a risk for
the operation, load and reliability of the SSR. In Crouzet SSR, the transient
protection can rise 1600 V (please refer to product datasheet).
User may also use external transient protection to the SSR for additional
protection (please refer to product datasheet).
!
!