Curt Group 18113 User manual

CURTMFG.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •18113-INS-RB •PAGE 1
INSTALLATION MANUAL 18113
Tools Required
Open wrench, 17mm Torque wrench
Socket, 17mm --
Level of Difficulty
Easy
Product Photo
Assembly
1
2
3
5
4
Parts List
Qty Description #
1Cargo carrier frame 1
1Support bracket 2
4Eye bolt, M10 3
4U-clamp 4
4Lock nut, M10 5
Product Registration
CURT Group stands behind our products
with industry leading warranties. You can
help us continue to improve our product
line and help us understand your needs
by registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king.
We value your feedback and we use
that information to make improvements
on our products. Please, take a minute
and let us know how we are doing.
WARNING
Do not carry flammable items on the carrier. Do not allow exhaust fumes
to blow directly on items in the carrier. This is a fire hazard.
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Distribute the weight evenly on the platform when hauling
a load. This carrier is not intended for transporting people.
Do not carry loads wider or deeper than the carrier.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Weight Capacity
500 lbs. 227 kg

CURTMFG.COM •NEED ASSISTANCE? •8 7 7. 2 8 7. 8 6 3 4 •18113-INS-RB •PAGE 2
Step 1
Place the cargo carrier frame (#1)
on a flat surface facing down.
Align the mounting holes in the support
bracket (#2) with the holes in the carrier frame.
Place an M10 eye bolt (#3)
through
the support bracket and carrier frame .
Place a U-clamp (#4) onto the M10 eye
bolt and secure with an M10 lock nut (#5).
Repeat for all attachment points.
Tighten all M10 hardware to 12 ft-lbs.
Note: Overtightening hardware may
cause damage to product or hardware.
Once assembled, insert the shank into the
receiver tube of the tow vehicle and align the
holes. Secure with a pin & clip (not included).
1
2
3
5
4