CYP CH-1107 TX User manual

CH-1107 TX
HDMI v1.3 over ONE CAT6
HDMI Transmitter
Operation Manual
CH-1107 TX

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 November 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
 To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
VR0 20101124 Preliminary Release

Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. Package Contents ......................................................................1
4. System Requirements..................................................................1
5. Features........................................................................................2
6. Specifications ..............................................................................3
7. Operation Controls and Functions.............................................4
7.1 Front Panel....................................................................4
7.2 Rear Panel....................................................................5
8. Connection and Installation .....................................................6
9. Acronyms...................................................................................7

1. Introduction
The HDMI 1.3 transmitter over ONE CAT6 is a tool for extending your HDMI
signal over long distances to a compatible display. Instead of using
expensive HDMI cables, your existing CAT6 cables/sockets can be utilized to
perform advanced functions like transferring Deep Color (12 bits/color) video
and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio) digital audio, with a bandwidth up to 225MHz. The HDMI 1.3
Transmitter and receiver, over ONE CAT6 extender is your substantial HDMI
extender tool.
2. Applications
 Distribute HDMI signals over long distances
 Showroom display
 Hypermarket display
 Lecture room display
3. Package Contents
 HDMI v1.3 Transmitter x 1
 5V DC Power Supply adaptor x 1
 Operation Manual x 1
4. System Requirements
Input HDMI source equipment and output HDMI over CAT6 receiver one
CAT6 cable.
1

5. Features
 HDMI 1.3, HDCP 1.1 and DVI1.1 compliant.
 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) Digital audio .
 Uses one CAT6 cable for data/DDC transmission.
 Equalizes and recovers incoming TMDS data before re-transmitting it in
optimal quality regardless of the incoming signal quality.
 Cable testing showed that with 1080p 8bit or 12bit resolution the HDMI
input source can be 20 meters away.
 When transmitting a signal in 1080p 8bit resolution the CAT6 operating
distance is 45 meters, and when the signal is in 12bit resolution the CAT6
operating distance is 10 meters.
 Supports xvYCC
2

6. Specications
Video Bandwidth 2.25MHz/6.75Gbps
Transmitter
Input/Output Ports 1 x HDMI Female port/1 x CAT6
Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certied)
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 78.5 (W) X 102 (d) X 30 (H) / Tx
Weight(g) 182 / Tx
Chassis Material Aluminum
Silkscreen Color Silver
Power Consumption TX: 3.5W
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (non-condensing)
3

7. Operation Controls and Functions
7.1 Front Panel
CH-1107TX
① ②
DC 5V
HDMI INPUT
① HDMI INPUT: This slot is where you connect the HDMI or DVI output
port of your source equipment such as DVD/Blu-ray players or Set-top-
boxes with an HDMI cable or link up with another receiver unit from the
same family to extend a signal over long distances.
② DC 5V: This is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC outlet.
4

7.2 Rear Panel
CH-1107TX
②①
TV/STD 10 Bit CAT6 OUT
EDID
8 Bit 12 Bit
① EDID Control Switcher: Switch the EDID between STD and TV. Switch to
STD to use the built-in EDID or switch to TV to use the TV’s EDID. The default
factory setting is TV, leave as is when the display is working properly.
Note: 1.When EDID is switched to STD the unit will use its built-in EDID which
supports:
Video → 1080p 8-bit, 10-bit or 12-bit (max)
Audio → PCM 2CH
2.The EDID selection will only be activated when the unit is re-plugged
and powered on.
② CAT6 OUT: Connect the CAT6 output of the transmitter with the CAT6
input of the HDMI over single CAT6 receiver.
Note: A. This system was tested with CAT6/23AWG/UTP/568B cables,
so if using cables of another type, results may vary.
B. Cable distance tested with PS3 120G & 40" Samsung LED 12 bit LCD
TV.
C.The gures provided in this manual are for reference only; actual
performance may depend on the source and display used along
with the type cable.
5

8. Connection and Installation
DVD LCD TV
CH-1107TX HDMI over Single
CAT6 Receiver
20M/8-bit
HDMI
Cable
HDMI
HDMI
HDMI
Cable
HDMI
HDMI
CAT6
Cable
45M/8-bit
6

Acronyms A
Acronym Complete Term
CAT6 Category 6 Cable
EDID Extended display identication data
HDMI High-Denition Multimedia Interface
7

20101125 MPM-CH1107TX
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.