CYP VEX-T1201T User manual

Operation Manual
Operation Manual
UHD+HDMI over Category Cable Transmitter
VEX-T1201T

DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of
the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for su󰀩cient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2022/08/24 Preliminary release

CONTENTS
1. Introduction...................................................... 1
2. Applications ..................................................... 1
3. Package Contents ........................................... 1
4. System Requirements..................................... 1
5. Features............................................................ 2
6. Operation Controls and Functions ................ 3
6.1 Front Panel ................................................. 3
6.2 Rear Panel................................................... 4
6.3 Top Panel..................................................... 5
7. Connection Diagram ....................................... 6
8. Specications .................................................. 7
8.1 Technical Specications .............................. 7
8.2 Video Specications .................................... 8
8.3 Audio Specications .................................. 10
8.3.1 Digital Audio ..................................... 10
8.4 Cable Specications.................................. 11
9. Acronyms ....................................................... 12

1
1. INTRODUCTION
This UHD+ HDMI over Category Cable Transmitter is part of an extension
system which is able to extend high quality 4K HDMI video along with audio
up to 60m (197ft) of standard Cat.6 network cable without signal loss or
introducing delay. This transmitter unit includes basic EDID management
functionality, an HDMI bypass output, and provides PoC (Power over Cable)
to the connected compatible receiver.
2. APPLICATIONS
• Long distance video and audio extension
• Hotel or convention center displays
• Lecture halls, auditoriums and classroom
• Houses of worship
• Conference rooms and boardrooms
3. PACKAGE CONTENTS
• 1× UHD+HDMI over Category Cable Transmitter
• 1× 12V/3A DC Power Adapter
• 1× Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game console, PC,
or set-top box.
• Compatible receiver with PoC (PD) support is recommended.
• The use of Premium High Speed HDMI cables, and industry standard
Cat.6, Cat.6A or Cat.7, is highly recommended.

2
5. FEATURES
• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• 1 HDMI input, 1 Cat.6 output, 1 HDMI bypass output
• Supports HDMI input and Cat.6 output resolutions up to 4K@60Hz (4:4:4,
8-bit)
• Cat.6 extension can reach to up to 60m (197ft)
• Supports extension of many audio formats including LPCM (up to 8
channels) and standard Bitstream
• Basic EDID management with 3 built in EDIDs and an EDID bypass option
• Top panel LEDs indicate link state, and power
• Unit is a PoC (PSE) device and can provide power to a connected
compatible receiver

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1.Sink
EDID
2.FHD
3.4K 30
4.4K 60
EDID
SERVICE HDMI IN
1
4
3
2
1 2 3
1SERVICE Port: This port is reserved for rmware update use only.
2HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box. DVI sources are supported with the
use of an HDMI to DVI adapter.
3EDID Dial: Use this dial to select the unit’s EDID management mode:
1 = Sink EDID 2 = FHD (1080p60) & LPCM 2.0
3 = UHD (4K30) & LPCM 2.0 4 = UHD+ (4K60) & LPCM 2.0

4
6.2 Rear Panel
CAT6 OUT
DC 12V
HDMI OUT
1 2 3
1CAT6 OUT Port: Connect to a compatible receiver with a single Cat.6, or
better, cable for transmission of all data signals. PoC will also be supplied
to a connected compatible PD receiver.
Note: The PoC function is designed to send power to compatible receiver
units only. Other brands of receiver may not be compatible.
2HDMI OUT Port: Connect to HDMI TVs, monitors, or ampliers for digital
video and audio output.
3DC 12V Port: Plug the 12V DC power adapter into this port and connect
it to an AC wall outlet for power. The top LED will illuminate red to
indicate the unit is on and receiving power.

5
6.3 Top Panel
Link
Power
F yqmpsfs!
UHD+HDMI over Category
Cable Transmitter
1
2
1Power LED: This LED will illuminate red to indicate the unit is on and
receiving power. When the unit is in update mode the LED will blink.
2Link LED: This LED will illuminate blue to indicate that a live source has
been detected on the input port. When no source is detected the LED will
remain o󰀨.