CYP CH-507TXWPUS User manual

CH-507TXWPUS
HDMI over CAT5e/6/7 Wall-Plate Transmitter with IR/
RS232/LAN/PoE
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 30/09/13 Preliminary Release
RDV2 25/07/19 Update Format and Cable
Distance

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Hardware Description ........................... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
6.3 RS-232 Pin Denitions........................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
8.1 Cable Specications .......................6

1
1. INTRODUCTION
The HDMI over CAT5e/6/7 Wall-Plate Transmitter can transmit
uncompressed audio/video over a single run of CAT5e/6/7 cable up
to 100m/328ft at 1080p and 70m/229ft at 4K with PoC, IR, RS232 and
LAN. of a data transmission rate of 100Mbps 100m/328ft at 1080p and
70m/229ft at 4K. A True HDBaseT 5Play solution to make your home or
ofce more efcient and easy with control.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1 x HDMI to CAT5e/6/7 with IR/RS232/LAN/PoE Transmitter
• 1 x IR Blaster
• 1 x 24V/1.25A DC Power Supply
• 1 x Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI source equipment such as DVD/Blu-ray(4K2K) player and
CAT5e/6/7 to HDMI receiver.
5. FEATURES
• HDMI 1.x and DVI 1.0 compliant
• HDCP compliant
• Supports HDMI 3D and 4K x 2K features
• Supports HDCP repeater and CEC bypass
• Supports distance up to 100m/328ft at 1080p and 70m/229ft at 4K
through CAT5e/6/7 cable
• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz(
YUV 4:4:4, 8-bit)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
and Bitstream over HDMI

2
• HDBaseT 5Play convergence: uncompressed high denition Video
and Audio, LAN serving, Power over Cable and RS232/IR Controls
• US 2 gang wall-plate design
6. HARDWARE DESCRIPTION
The following sections describe the hardware components of the unit.
6.1 Front Panel
LAN
HDMI IN
RS-232 IN
POWER LINK
IR 1
Blaster
IR 2
Extender
DC 24V
6 7 8
2
1
3
5
4
1LAN: Connect to an active network for LAN serving and Telnet/
Web GUI control.
When the transmitter or any compatible LAN equipped receivers
are connected to a network, this allows the network access
(including internet access if available) to be shared between the
transmitter and all connected receiver. Connect any Ethernet
equipped device e.g. a Smart TV or games console to the LAN
port of a receiver for that device to share the network/internet
access.

3
2RS-232 IN: This slot is connect with D-Sub 9-pin cable from PC/
Laptop device RS-232 commands sending.
3DC 24V: Connect the power adaptor included in the package
and then connect to AC power to activate the device..
4POWER LED: This LED will illuminate when the device is connected
to a power supply.
5LINK LED: This LED will illuminate when the both CAT5e/6/7 input
and output signal is connected.
6IR 2 Extender: This slot is to connect with the IR Receiver cable
included in the package for IR signal receiving.
7IR 1 Blaster: This slot is to connect with the IR Blaster cable included
in the package for IR signal transmitting.
8HDMI IN: This slot is to connect with HDMI source equipment such
as DVD/Blu-ray player with HDMI source signal.
6.2 Rear Panel
1CAT5e/6/7 OUT: Connect to CAT5e/6/7 to HDMI Receiver for signal
extending.
6.3 RS-232 Pin Denitions
Pin Dene TX/RX
1 N/C
2TxD/RxD
3RxD/TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C

4
7. CONNECTION DIAGRAM
1.5m
60°
7m
3m
3m
60°
1.5m
60°
7m
3m
3m
60°
LAN
HDMI OUT
RS-232 OUT
POWER LINK
IR 1
Extender
IR 2
Blaster
LAN
HDMI IN
RS-232 IN
POWER LINK
IR 1
Blaster
IR 2
Extender
DC 24V
RS-232 Equipped PC
or Notebook
Internet Modem or
Router
CAT5e/6/7
Power
Supply
DVD or Blu-ray
Player
TV or Monitor
Notebook
RS-232 Equipped
HDMI Switcher
IR Blaster
IR Blaster
CAT5e/6/7
IR Extender
IR Extender
RS-232

5
8. SPECIFICATIONS
Video Frequency 300MHz/9Gbps
Input Ports 1 x HDMI, 1 x IR Extender, 1 x LAN, 1 x RS232
Output Ports 1 x IR Blaster, 1 x CAT5e/6/7
IR Frequency 30 - 50kHz (30 - 60kHz under ideal conditions)
Baud Rate up to 115200/sec
Power Supply 24V / 1.25A DC (US/EU standards, CE/FCC/
UL certied)
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions (mm) 145.7(W) x 85.7(D) x 36.5(H)/Excluding Jacks
145.7(W) x 85.7(D) x 36.5(H)/Including Jacks
Weight(g) 352
Chassis Material Metal
Silkscreen Color White
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C~60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (no condensation)
Power Consumption (W) 7W