D-Link DSP-T115A User manual

Quick Install Guide
Bluetooth Smart Plug
D S P -T 115 A

D S P -T11 5 A 1
ENGLISH
CONTENTS OF PACKAGING
• An internet connection from a Wi-Fi router or LTE service.
• DCH-G601W Wi-Fi Bluetooth Hub or DCH-G601 LTE Bluetooth Hub
• An e-mail account (required to register for Afero® service)
Note: The Afero®app is available for iPhone®, iPad®, and Android™ devices. Please refer to the
mobile app's store page to check whether your device is compatible.
If any of these items are missing from your packaging, please
contact your reseller.
For the full product specicaions, please go to
http://www.dlink.com
SYSTEM REQUIREMENTS
BLUETOOTH SMART PLUG
DSP-T115A
QUICK INSTALL CARD

D S P -T11 5 A
2
ENGLISH
SETUP EXAMPLE
The DSP-T115A Bluetooth Smart Plug allows you to be notied of the presence of water so you can
stop ooding from getting out of hand from wherever you are. The following diagram shows how you
can set up your Smart Home for use with the DSP-T115A.
SAFETY
For your safety, please read the following precautions before installing or using your
DSP-T115A:
1. Do not open the device or attempt to repair or service it.
2. Use the device in a dry location, and avoid placing it in a humid environment.
3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean
the device, disconnect it from the power outlet and use a damp towel.
4. This device should only be used indoors.
Internet
Router
Smartphone
with Afero®app
DSP-T115A
Hub
or
Cellular Tower
Home appliance

D S P -T11 5 A 3
ENGLISH
PRODUCT SETUP
USING THE MOBILE APP FOR SETUP
Step 2:
Launch the app and log into your Afero®account.
New users: Tap CREATE ACCOUNT to register for a new Afero®
account.
Existing users: Tap SIGN IN to log in with your Afero®email and
password.
Once the conguration process is complete, use the Afero®app to automate your home and
stay updated with instant push notications to your mobile device while you're away from home.
Step 1:
On your mobile device, download and install the Afero®app from the
App Store or Google Play.
Step 3:
After signing in, tap the icon in the top-left corner, then tap Add
Device, and follow the instructions.
When you are asked to scan a QR code, use the code on the
label attached to your device, or on the Quick Install Card in your
package.

D S P -T11 5 A
4
ENGLISH
PRODUCT SETUP
INSTALLING THE DEVICE
Please refer to the steps below to quickly get your DSP-T115A up and running.
Step 1:
If you haven't already done so, add the DSP-T115A to your Afero®
account. Refer to the previous page for details.
Step 3:
Connect your home appliance's power cord to the DSP-T115A.
Step 2 :
Switch your home appliance to the ON position.
Step 4:
Congure DSP-T115A settings in the Afero®app.

D S P -T11 5 A 5
ENGLISH
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I RESET THE DSP-T115A?
Remove the DSP-T115A from your Afero®account, it will change your settings back to the default
settings.
2. WHY CAN'T I CONNECT MY DSP-T115A TO MY AFERO®ACCOUNT?
The DCH-G601W Wi-Fi Bluetooth Hub connected to a wireliss router with an internet connection or
the DCH-G601 LTE Bluetooth Hub with mobile data service is required. Please unsure that the hub
is connected to the internet and properly set up with your Afero® account.
3. WHAT APP DOES THE DSP-T115A WORK WITH?
The DSP-T115A works with the Afero®app. You may download the free app from the App Store (for
Apple devices) or Google Play (for Android devices). Type “Afero” to search for the app.
3. HOW DOES THE DSP-T115A WORK WHILE I AM AWAY FROM HOME?
Remote access of the DSP-T115A is enabled once you have connected it to your hub by registering
it with your Afero®account. You will be able to control it from anywhere using your iPhone, iPad or
Android device.

D S P -T11 5 A
6
ENGLISH
REGULATORY STATEMENTS
FEDERAL COMMUNICATION COMMISSION
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
• to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
• Any changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.

D S P -T11 5 A 7
ENGLISH
INDUSTRY CANADA
Industry Canada Statement
1. This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
• This device may not cause interference
• this device must accept any interference, including interference that may cause
undesired operation of the device.
2. This Class B digital apparatus complies with Canadian ICES-003.
3. This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter, except tested built-in radios.
4. The County Code Selection feature is disabled for products marketed in the US/ Canada.
1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
• L'appareil ne doit pas produire de brouillage
• L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada..
3. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une
autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
4. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés
aux États-Unis et au Canada.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.