D-Link DVA-G3340S User manual

Before You Begin
Thisproductcanbesetup
usinganycurrentwebbrowser,
i.e.,Internet Explorer6or
NetscapeNavigator6.2.3. DVA-G3340S
Wireless ADSL
V
oIP Route
r
If you purchased this Router to share your high-speed Internet connection with other computers, you
must have an established Internet account from an Internet Service Provider (ISP).
It’s best to use the same computer that is connected to your router for configuring the DVA-G3340S
Wireless ADSL VoIP Router. The DVA-G3340S acts as a DHCP server and will assign all the
necessary IP address information on your network. See part 2 of this Quick Installation Guideor the
Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.
©2006 D-Link Australia Pty Ltd. All rights reserved. Trademarks or registered trademarks are the
property of their respective holders. Software and specifications subject to change without notice.
DVA-G3340S Wireless VoIP Router
Check Your Package Contents
DV
A
-G3340S
shown with antenna
12V, 1.2A Power
Adapter
CD-ROM
containing Manual and Warranty
USB Cable
RJ-11 Cable
Ethernet Cable Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.

Connecting the Router to your
Computer
A. First, connect the power adapter to the power input at the back
panel of the DVA-G3340S and then plug the other end of the
power adapter to a wall outlet or power strip. Press the ON
switch on the back of the unit. On the front of the device, the
Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port
on the back panel of the DVA-G3340S and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert the telephone cable included with the Router into the
ADSL port, and then connect the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
Antenna:
Ensures good
wireless reception
LAN Ports:
Connect to the LAN
and other computers
Phone
/
ADSL Connections:
Connect to your ADSL line, PSTN
line and analog phones using
standard phone cabling
Reset:
Push to return to
factory settings
Power Input:
Connect to AC
A
dapte
r
2

Configure IP Settings
To connect to the network, make sure the network adapter in
your computer is configured properly. Here’s how to configure
the network adapter to obtain an IP address automatically for the
DVA-G3340S Wireless ADSL VoIP Router.
For Microsoft Windows XP
Go to Start > select
Settings > click
Control Panel >
Double-click on the
Network
Connections icon
Double-click on
Network Connections
Right-click the
Local Area
Connection icon,
and then select
Properties.
Select Properties
3

The dialog box displays
a list of currently
installed network items.
Click Internet Protocol
(
TCP/IP
)
Make the choice to get the
IP settings assigned
automaticall
y
.
Click OK.
Click Pro
p
erties
Select Obtain an IP
address automatically
4

Connecting Additional Computers
to the DVA-G3340S Wireless
A
DSL
VoIP Router
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet
equipped computers to the LAN ports on the back panel of the DVA-
G3340S.
When you have completed the steps in this Quick Installation Guide,
your connected network should look similar to this:
5

Initial Web Configuration
The login dialog box
appears:
When you first log in,
the User name is
admin and
the Password is also
admin. These may
be changed later.
Click OK.
Open your Web browser
and type http://10.1.1.1
into the URL address
box. PressEnter orReturn.
6

The Home > Wizard window appears:
Click the Run Wizard button at the bottom of the page to commence the
Setup Wizard. This will guide you through the steps in order to configure
your Internet, Wireless and VoIP settings.
Click Run Wizard.
7

Running the Setup Wizard
Now that we have commenced the Setup Wizard we will need to go
through the five (5) steps in order to configure your unit for the Internet,
Wireless and VoIP settings
Click the Next button to start the wizard.
Click the Next button.
8

Step 1: Choose Time Zone
In this step we will need to select the correct Time Zone for your
location. This will ensure that the correct Time and Time Zone store in
this unit is correct.
Click the Next button.
Select your Time Zone from
the list.
Please select the correct Time Zone from the drop down list.
eg: (GMT +10:00 Canberra, Melbourne, Sydney)
Click the Next button to continue.
9

Step 2: Select Your Internet Connection Type
In this step we will be configuring your Internet connection. For this
Guide we will only cover the PPPoE/PPPoA connection type. For further
information on other connection types please check the Manual.
Click the Next button.
Select PPPoE/PPPoA.
Select PPPoE/PPPoA for the connection. This is the most common
connection type for DSL users.
Click the Next button to continue.
10