D-Link DAP-3666 User manual

This document will guide you through
the basic installation process for your
new Nuclias Connect AC1200 Wave 2
Outdoor Access Point
Building Networks for People
DAP-3666
Documentation also available
via the D-Link Website
Quick Installation Guide
Nuclias Connect AC1200 Wave 2
Outdoor Access Point

2D-Link DAP-3666 Quick Install Guide
Before You Begin
This chapter describes safety precautions and product information you have to know
and check before installing DAP-3666.
Professional Installation Required
1. Please seek assistance from a professional installer who is well trained in the RF
installation and knowledgeable in the local regulations.
2. The DAP-3666 is distributed through distributor and system installer with professional
technicians and will not be sold directly through retail store.To keep you safe and install
the hardware properly, please read and follow these safety precautions.
Safety Precautions
To keep you safe and install the hardware properly, please read and follow these safety
precautions.
1. Ifyouareinstallinganaccesspointforthersttime,foryoursafetyaswellas
others’, please seek assistance from a professional installer who has received safety
training on the hazards involved.
2. Keep safety as well as performance in mind when selecting your installation site,
especially where there are electric power and phone lines.
3. When installing your antenna, note the following:
• Do not use a metal ladder;
• Do not work on a wet or windy day;
• Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.
4. When the system is operational, avoid standing directly in front of the antenna.
StrongRFeldsarepresentwhenthetransmitterison.
5. A safety grounding system is necessary to protect your outdoor installation from
lightning strikes and the build-up of static electricity. When mounting the Outdoor AP
on the antenna mast, you have to connect the Outdoor AP to the same grounding
system* with the AC wall outlet.
6. Alwayscheckwithaqualiedelectricianifyouareindoubtastowhetheryouroutdoor
installation is properly grounded.
* The grounding system must comply with the National Electrical Code and safety standards that apply in your
country.
ENGLISH

Quick Install Guide
This installation guide provides basic
instructions for installing the DAP-3666
Nuclias Connect AC1200 Wave 2 Outdoor
Access Point on your network. For additional
information about how to use the Access
Point, please see the datasheet and user
manual from the D-Link support website.
Minimum System
Requirements
Computer with Windows, MAC OS, or Linux-
based operating system, and an Ethernet
adapter installed
-Mozilla Firefox 52.0 or higher, Internet
Explorer 11 or higher, Safari 10.1 or
higher, Google Chrome 59 or higher.
Package Contents
-DAP-3666 Nuclias Connect AC1200 Wave
2 Outdoor Access Point
-Quick Installation Guide
-Mounting kit (Wall/Pole Mount)
-Stainless steel mount base x 1
-Stainless tie back straps x 2
-Wall screw x 4
-Wall plug x4
-Stainless mount screw (hexagonal hole)
x1
-Hexagon Socket Spanner
-Two LAN Port Waterproof Enclosure
-Grounding Wire
If any of the above items are missing, please
contact your reseller.
NOTE no PSU supplied. To power the units use an
D-Link PoE switch, DPE-311GI or 802.3af PoE adapter.
Physical Installation
STEP 1: Connect an Ethernet
Cable to the LAN1 (PoE) Port on
the AP.
STEP 2: Mount the AP to a Pole
or Wall
2A: Mounting The DAP-3666 On
A Pole
Secure mount base to the pole with two
stainless tie back strap sets. Ensure that the
tie back is locked securely.
Pole Mount
3
D-Link DAP-3666 Quick Install Guide
ENGLISH

Align the DAP-3666 with the mounting plate
Once aligned, slide the device down so
that the mounting plate securely locks
into the DAP-3666
2B: Mounting The DAP-3666 On
A Wall
Securely mount the base to the wall using
wall plug and wall screw.
Align the DAP-3666 with the mounting plate
Once aligned, slide the device down so
that the mounting plate securely locks
into the DAP-3666
STEP 3: Install Mount Screw to Fix
DAP-3666 On A Mounting (Pole/
Wall Mount base)
Use the included mount screw (hexagonal
hole) to lock the DAP-3666 to the pole/wall
mount
Wall Mount
4D-Link DAP-3666 Quick Install Guide
ENGLISH

With the included hexagon socket spanner,
tighten the mount screw until the DAP-3666
is secured.
STEP 4: Connect Grounding Wire
A grounding wire is recommended to
protect your device from lightning strikes
and the buildup of static electricity.
Attach the grounding wire to the DAP-3666
using the included screw.
Tighten the grounding wire to the DAP-3666
until it is securely attached.
Attach the other end of the grounding wire to
either the wall or pole mount. Ensure that the
wall or pole mount is connected to an electrical
ground.
STEP 5: Conguring the Access
Point
Note:D-Linkrecommendsconguringthe
device before mounting it.
Using D-Link Nuclias Connect
The DAP-3666 is designed to be managed
through D-Link Nuclias Connect. Refer to
the D-Link Nuclias Connect Manual for
detailedcongurationinstructions.
Figure 4: Connecting through D-Link
Nuclias Connect
1. Download the free Nuclias Connect
A
B
PoE Switch Computer
AP
LAN1 (PoE)
Wall Mount Pole Mount
5
D-Link DAP-3666 Quick Install Guide
ENGLISH

app from the App Store or Google Play
by searching for Nuclias Connect or by
scanning the QR code below.
2. Open the Nuclias Connect app and
follow the onscreen instructions to
discover and set up your device.
Manual Conguration
If you are not using Nuclias Connect,
you may manually congure the DAP-
3666 using its web user interface (UI).
Refer to the DAP-3666 User Manual for
detailed conguration instructions. Use
the following methods to access the web
user interface:
Note: The management computer must
be in the same subnet as the DAP-3666.
1. Use an Ethernet cable to connect the
management computer to the PoE switch
or to the PoE Injector the DAP-3666 is
connected to.
2. Open a web browser on the management
computer and type in dap3666.local in
theaddresseldandpress Enter.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
TECHNICAL SUPPORT dlink.com/support
6D-Link DAP-3666 Quick Install Guide
ENGLISH

7
D-Link DAP-3666 Quick Install Guide
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radioortelevisionreception,whichcanbedeterminedbyturningtheequipmento󰀨
and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connecttheequipmentintoanoutletonacircuitdi󰀨erentfromthat
• to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
• Anychangesormodicationsnotexpresslyapprovedbythepartyresponsiblefor
compliance could void the user's authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to
allUSmodel.PerFCCregulation,allWiFiproductmarketedinUSmustxedtoUS
operation channels only.
ENGLISH