Dakota Digital HDX-66F-BRO User manual

Manual # 650579A
HDX-66F-BRO
Dakota Digital HDX Instrument Installation
For 1966-‘77 Ford Bronco
For 1961-‘66 Ford Pickup
Your new HDX-66F-BRO kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
HDX Display
1. Remove the stock gauge cluster from the dash.
Ford Speed Adapter
Buzzer
(4) ½” Screws

Manual # 650579A
2. Remove these four screws to separate the bezel from the gauges.
3. The only part that will be re-used is the stamped bezel and the screws that mount the bezel.

Manual # 650579A
4. Secure the HDX system to the bezel with the four supplied screws. The HDX system should
align tightly and sit flush with the bezel.
5. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system.
Buzzer Connector

Manual # 650579A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Re-install the cluster into the vehicle and refer to the main manual for wiring instructions to complete
the HDX installation.