Dakota Digital VHX-69P-GTO User manual

Manual # 650514A
VHX-69P-GTO
Dakota Digital VHX Instrument Installation
For 1969 GTO’s
Your new VHX-69P-GTO kit includes:
Installation
Control Box
36” CAT5 Cable
Universal Sender
Pack
Installation Manuals
VHX Display
12” CAT5
Cable
1. Disconnect and remove the stock gauges from the dash and save all hardware for reassembly.
Switch Assembly

Manual # 650514A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect one end of the 12” CAT5 cable to either
jack on the Tach and the other end to the Speed
assembly, then connect one end of the 36” CAT5
cable to the remaining open jack on the Tach.
Use caution when routing the other end of this
cable to the control box mounting location.
2. With the stock gauges removed, the dash is now ready to accept the VHX gauges using stock
hardware in the seven (7) original mounting points.
4. Refer to the main manual for wiring
instructions to complete the VHX
installation.