Dakota Digital Retrotech RTX-66F-BRO User manual

Manual # 650681
RTX-66F-BRO
Dakota Digital RTX Instrument Installation
For 1966-‘77 Ford Bronco
For 1961-‘66 Ford Pickup
Your new RTX-66F-BRO kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
RTX Display
1. Remove the stock gauge cluster from the dash.
Ford Speed Adapter
Buzzer
(4) ½” Screws
Switch Assembly

Manual # 650681
2. Remove these four screws to separate the bezel from the gauges.
3. The only part that will be re-used is the stamped bezel and the screws that mount the bezel.

Manual # 650681
4. Secure the RTX system to the bezel with the four supplied screws. The RTX system should
align tightly and sit flush with the bezel.
5. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
RTX system.
Buzzer Connector

Manual # 650681
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Re-install the cluster into the vehicle and refer to the main manual for wiring instructions to complete
the RTX installation.