Dakota Digital RLC Series User manual

Manual # 650775
RLC-42F
Dakota Digital RLC Clock Installation
For 1942-‘48 Ford Car
Your new RLC-42F kit includes:
Installation
RLC Clock
Wiring Manual
1. Disconnect and remove the original clock from the back side. Retain the factory hardware for RLC
installation.
Harness

Manual # 650775
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect the provided harness to the clock. Route the other end to the RTX control box. Refer to
the enclosed clock operating manual for setup.
2. With the original clock removed, carefully maneuver the RLC clock in place while lining up the
mounting locations and secure the gauge with factory hardware from disassembly.