Dakota Digital VHX-61C-IMP User manual

Manual # 650399B
VHX-61C-IMP
Dakota Digital VHX Instrument Installation
For 1961-‘62 Chevy Impala
Your new VHX-61C-IMP kit includes:
Control Box
CAT5 Cable
Universal Sender
Pack
Installation Manuals
VHX Display
(2) Mounting nuts
U-brackets (3X)
Plastic Thumb
nuts (6x)

Manual # 650399B
Installation
1. Remove the stock gauges from the dash.
2. Insert the three satellite cans from the front of the dash; from left to right: Temp, Tach, Oil. Use the
U-brackets and thumb nuts to secure the gauge to the dash while maintaining proper alignment.
3. Place the main gauge over the factory studs. Use the two nuts provided to secure it.

Manual # 650399B
5. Connect the CAT5 cable to the system. As the assembled cluster is installed into
the dash, take care when routing this cable to the control box.
4. Connect the ribbon cables
to their respective ends.

Manual # 650399B
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Refer to the main manual for wiring instructions to complete the VHX installation.