dallmeier MDF4220HD Guide

004709 / 2.0.0 / 2017-01-17
MDF4220HD
Commissioning
English

2www.dallmeier.com
MDF4220HD Commissioning
Informaon about Copyright, Trademarks, Design Patents
© 2017 Dallmeier electronic
The reproducon, distribuon and ulizaon of this document as well as the communicaon of
its contents to others without express authorizaon is prohibited. Oenders will be held liable
for the payment of damages.
All rights reserved in the event of the grant of a patent, ulity model or design.
We reserve the right to make technical modicaons.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentaon, e.g. print or spelling errors, and for those not
caused by intenon or gross negligence of the manufacturer.
All trademarks idened by ® are registered trademarks of Dallmeier electronic.
All trademarks idened by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA;
AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA;
Intel and Penum or Intel Penum of Intel Corporaon headquartered in Santa Clara, California, USA;
JavaScript of Oracle Corporaon (and/or its aliates) headquartered in Redwood Shores, California, USA;
Microso, AcveX, DirectX, Internet Explorer, Windows and Windows Vista of Microso Corporaon headquar-
tered in Redmond, Washington, USA.
Third-party trademarks are named for informaon purposes only.
Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure the com-
plete idencaon of third-party trademarks and indicaon of the respecve holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the
respecve trademark is unprotected.

www.dallmeier.com 3
Commissioning MDF4220HD
Table of Contents
1 Validity 4
2 Documents 4
Data Sheet 4
Commissioning 4
Conguraon 4
3 Typographical Convenons 5
4 Safety Instrucons 7
5 General Notes 10
Scope of Delivery 10
Transportaon and Packaging 10
Warranty 11
Approvals/Cercaons 11
Appropriate Use 12
6 Requirements 13
General 13
Operaon 13
7 Maintenance 15
8 Product Variants 16
9 Mounng Variants 18
10 Cabling 30
11 Connecon and Login 32
Connecon 35
Login 36
12 Technical Specicaons 37

4www.dallmeier.com
MDF4220HD Commissioning
1 Validity
This document applies to the following device:
• MDF4220HD
Figures in this document may dier from the actual product.
2 Documents
Data Sheet
The document “Data sheet” contains detailed technical specicaons and features
of the device.
The target audience is trained system integrators.
Commissioning
The document “Commissioning” (this document) contains detailed descripons on
installaon, connecon and commissioning of the device as well as safety instruc-
ons and general notes.
The target audience is trained system integrators.
Conguraon
The document “Conguraon” contains detailed descripons on the conguraon
of the device.
The target audience is trained system integrators.

www.dallmeier.com 5
Commissioning MDF4220HD
3 Typographical Convenons
This document may contain various warning words and symbols that indicate
potenal sources of danger:
DANGER
DANGER indicates a hazardous situaon which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situaon which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situaon which, if not
avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address pracces not related to
physical injury.

6www.dallmeier.com
MDF4220HD Commissioning
For reasons of clarity and readability, various text formang elements and types
of emphasis are used in this documentaon:
Instrucons are indicated by arrows (➡):
➡Carry out instrucons one aer the other in the sequence described.
Expressions in bold/italics generally indicate a control element on the device
(switches or labels) or on its user interface (buons, menu items).
Paragraphs in italics provide informaon on basic principles, special features and
ecient procedure as well as general recommendaons.

www.dallmeier.com 7
Commissioning MDF4220HD
4 Safety Instrucons
Only use the device if it is technically in proper working condion and for the
intended purpose while keeping safety and potenal dangers in mind.
• Qualied Personnel
The installaon, mounng, connecon, commissioning and conguraon of the
device may only be carried out by qualied personnel.
This also applies to the maintenance, tesng and repair, whereat the regula-
ons of the DIN VDE 0701 series of standards (repair, modicaon and inspec-
on of electrical appliances) must be followed.
• Regulaons
The use of video and audio surveillance systems is, in general, strictly regu-
lated. Inform yourself about the currently valid laws and regulaons regarding
data, worker and environmental protecon before using the device and ensure
compliance with them.
• System Components
Only use internal components that have been tested and approved by Dallmeier.
Inappropriate internal components may cause malfuncons, damages and data
loss and may result in the loss of warranty.
• Modicaons
Do not make any modicaons to the hardware or soware that have not been
tested and approved by Dallmeier.
Inappropriate modicaons may cause malfuncons, damages and data loss
and may result in the loss of warranty.

8www.dallmeier.com
MDF4220HD Commissioning
• Documentaon
Read the documents included in the delivery carefully and thoroughly.
Always observe the contained instrucons, notes and warnings.
The product documentaon contains several documents which are included in
the delivery in printed form and/or on a digital medium.
Store all documents in legible condion in a suitable locaon in order to pro-
vide for later consultaon.
• Condensaon Water
If the device is brought from a cold to a warm environment, resulng conden-
saon water may cause malfuncons and damages.
In this case, wait (up to 8 hours) unl the device has reached room tempera-
ture before commissioning.
• Earthing & Equipotenal Bonding
For the safety of persons (protecon against dangerous contact voltages) and
devices (protecon against over-voltages) as well as for the immunity of infor-
maon and communicaon technology equipment to electromagnec interfer-
ences (EMI), all protecve measures, which are specied by the currently valid
DIN, VDE and ISO standards and which provide for a standard-compliant earth-
ing and a correct equipotenal bonding of electrical and electronic devices, are
mandatory and must be fullled by all means.
• Lightning Storms
To avoid damage to the device by electrical surge during lightning storms, un-
plug the device from the mains power supply (pull out the power plug).
This is also recommended, when the device has been unused for a long period
of me.

www.dallmeier.com 9
Commissioning MDF4220HD
• Operang Condions
Unfavourable operang condions may shorten the life of the device and may
cause malfuncons, damages and data loss and may result in the loss of war-
ranty.
Observe the specicaons given in the technical data, the operang condion
requirements and the maintenance instrucons.
• Foreign Bodies
If objects or liquids get into the device, immediately disconnect it from the
power supply (pull out the power plug).
Contact the sales partner responsible for your area.
• Burnt Smell
If you noce burnt smell or a formaon of smoke coming from the device, im-
mediately disconnect it from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
• Opening
The device may only be opened by qualied personnel for commissioning,
inspecon, maintenance and repair.
• Disposal
Do not dispose waste electrical and electronic equipment into the household
trash.
Disconnect the device from the power supply.
Remove all connected devices.
Return the device to your respecve sales partner.

10 www.dallmeier.com
MDF4220HD Commissioning
5 General Notes
Scope of Delivery
Included in the standard scope of delivery is:
1× Documentaon “Conguraon” (published on DVD-ROM)
1× Documentaon “Commissioning” (published in print and on DVD-ROM)
4× Mounng bracket + Knurled screws (M3×8 mm)
The scope of delivery may dier depending on the ordered equipment, device vari-
ant or country of desnaon.
The funconal range of the device depends on the ordered equipment or device
variant and may dier from this document’s content.
Certain funcons and features may require the purchase of an addional license.
Transportaon and Packaging
Store the original packaging for later transportaon.
Dallmeier is not responsible for any damage resulng from unprofessional/im-
proper transportaon.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packaging suf-
ciently protects the device against damage, moisture, heat and cold.

www.dallmeier.com 11
Commissioning MDF4220HD
Warranty
The terms and condions valid at me the contract was signed shall apply.
Approvals/Cercaons
The following approvals/cercaons were valid for the device at the me of this
document’s compilaon:
• CE, FCC, ACA, UVV “Kassen” (DGUV Test), UL, DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucon manual, may cause harmful interference to radio communicaons. Operaon of
this equipment in a residenal area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.

12 www.dallmeier.com
MDF4220HD Commissioning
Appropriate Use
The MDF4220HD is a hybrid HD mini box camera.
In addion to HD video over IP (Ethernet), the hybrid camera provides for a simul-
taneous analog SD (PAL/NTSC) video output via BNC (CVBS).
The camera is designed for indoor installaons and can be powered via PoE
(Power over Ethernet, Class 0, IEEE 802.3af) or supplied with 12 V DC
(separate power supply unit required).
Equipped with a 1/4" tripod socket located on the top and boom side, the cam-
era ts all standard brackets with UNC threaded screws.
NOTICE
The MDF4220HD is designed for indoor installaons.
An outdoor installaon is prohibited and may result in
malfuncon, damage, data loss and loss of warranty.

www.dallmeier.com 13
Commissioning MDF4220HD
6 Requirements
General
Unfavourable local condions may shorten the lifeme of the product and may
cause malfuncons or damages.
Do not install/operate the device in places
• with a large amount of dust and dirt,
• with steam or oil vapours (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiaon (e.g. radio transmiers, magnec elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insucient air venlaon (e.g. closed cabinet).
Operaon
Observe the following notes for the operaon of the device:
• The device can be powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af)
or supplied with a separate 12 V DC power supply unit.
However, always beware not to use both power sources simultaneously.
• Always ensure the correct polarity when using a separate 12 V DC power supply
unit.

14 www.dallmeier.com
MDF4220HD Commissioning
• Always disconnect the separate 12 V DC power supply unit from the mains
socket (pull out the power plug) before connecng or disconnecng the device.
• In order to comply with UL’s requirements, always use a UL-cered, Limited
Power Source (LPS) Class 2 power supply unit when operang the device with a
separate 12 V DC power supply unit.
• When using a separate 12 V DC power supply unit, interference caused by a
ground loop may occur in the analog video signal. In this case, use a video
signal transformer (balun) for galvanic (ground) isolaon between the signal
source (camera) and the RG-59 cable.
• If the device or the cables connected to the device are located near sources
with strong radiaon, the video image may be distorted.
• The device is equipped with automac gain control (AGC). In low light condi-
ons the image may be altered (e.g. noise). However, this is not a camera
malfuncon.
• The quality of the video image depends on the lighng condions and the used
monitor.
• The accuracy of the automac white balance (AWB) algorithm depends on the
used lighng. Mixed light (consisng of arcial light and daylight) may cause
color distorons (inaccurate color reproducon).
• Poor lighng can lead to an incorrect white balance.

www.dallmeier.com 15
Commissioning MDF4220HD
7 Maintenance
The device may only be opened by qualied personnel for commissioning,
inspecon, maintenance and repair.
Cleaning
If it is necessary to clean the device, observe the following notes:
NOTICE
Damage to the surface of the device
➡Clean the housing (outside) with a so, dry and
anstac cloth.
• Do not use detergents.
➡If necessary, remove dust from the lens element
with a suitable bulb blower.
• Always beware not to touch the lens element in
order to avoid damages due to scratching or loss
of image quality due to ngerprints.
• Do not use canned air.
• Do not use organic solvents (alcohol, benzine) or
coon buds for cleaning.

16 www.dallmeier.com
MDF4220HD Commissioning
8 Product Variants
Monofocal lens F2.0 / 2.4 mm

www.dallmeier.com 17
Commissioning MDF4220HD
Varifocal lens F2.0 / 2.8 – 6 mm
ⓐLocking screw (focus)
ⓑLocking screw (focal length)
ⓐ
ⓑ

18 www.dallmeier.com
MDF4220HD Commissioning
❶
9 Mounng Variants
The installaon of the device may only be carried out by qualied personnel.
ⓐKnurled screw M3×8 mm (2×)
ⓐ

www.dallmeier.com 19
Commissioning MDF4220HD
More mounng variants can be found in the product data sheet on:
www.dallmeier.com

20 www.dallmeier.com
MDF4220HD Commissioning
❷
ⓐKnurled screw M3×8 mm (2×)
ⓐ