DeLonghi PAC N Series User manual

1

MADE IN CHINA / HECHO EN CHINA
www.delonghi.com
5715112141_00/11.15

AIR CONDITIONER
INSTRUCTION MANUAL  SAVE THESE INSTRUCTIONS
CONDITIONNEUR D’AIR PORTATIF
MODE D’EMPLOI  CONSERVEZ CETTE NOTICE
AIRE ACONDICIONADO PORTÁTIL
INSTRUCCIONES DE USO
CONSERVE ESTAS INSTRUCCIONES
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE
USAR SU APARATO
PAC N Serie
Visit: www.delonghiregistration.com
Visit: www.delonghi.com for a list of service
centers near you.
Visitez: www.delonghiregistration.com
Visitez: www.delonghi.com pour y voir une liste
des centres de réparation proches de chez vous.
Visite: www.delonghiregistration.com
Visite: www.delonghi.com para ver la lista de
centros de servicios cercanos a usted.
ELECTRICAL SPECIFICATIONS
DONNEES ELECTRIQUES
ESPECIFICACIONES ELECTRICAS
115 V ~ 60 Hz 10 A

2

3
5
Description - Description -Descripción
Accessories - Accessoires - Accesorios
12
3
11 12 13 14
16
15 18
17
4
5
9
10
8
7
6

4
Important safeguards en
DESCRIPTION
1Air outlet grille
2Control panel
3Handles
4Castors
5Filter
6 Air intake grille
7Air exhaust hose housing
8Air intake grille
9Power cable
10 Drainage hose with 2 caps
11 Wall ange with cap
12 Air exhaust hose
13 Hose adaptor
14 Accessory for wall mounting
15 Window bracket
16 Additional window bracket
17 Window outlet
18 Remote control
• Use this appliance only as described in this
instruction manual.
As with any electrical appliance, the
instructions aim to cover as many situations as
possible. Caution and common sense should
be used when operating and installing this air
conditioner.
• Thisappliancehasbeenmanufacturedtocool
and dehumidify domestic environments and
must not be used for other purposes.
• It is dangerous to alter or modify the unit’s
characteristics in any way.
• Theappliancemustbeinstalledinaccordance
with the relevant national legislation.
• Shouldrepairsbenecessary,contactthenearest
authorizedRepairServiceCenter.Unauthorized
servicing can be dangerous.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• In the case that the power cord becomes
damaged, this must be repaired only by
specialized personnel authorized by the
manufacturer in order to protect against re.
• Always ensure the appliance is plugged into
a grounded 3-prong outlet. If you have any
doubts check with a qualied electrician.
• Westronglydiscouragetheuseofanextension
cord due to potential safety hazards.
• Before cleaning or maintenance operations,
always unplug the unit from the outlet.
• Donotpullonorplacestrainonthepowercord
when moving the appliance.
• Theapplianceshouldnotbeinstalledwherethe
atmosphere may contain combustible gases, oil
or sulphur, or near heat sources.
• Do not rest hot or heavy objects on the
appliance.
• Cleantheltersatleastonceaweek.
• Avoidusingheatersneartheunit.
• The unit should be transported in a vertical
position. If this is not possible secure the unit at
an angle, do not lie it horizontally.
• Before transporting the unit, drain the unit.
After transportation, wait at least 6 hours
before switching the unit on.
• The packaging materials can be recycled.You
are therefore recommended to place them in
the special containers for dierentiated waste
collection.
• This appliance is tted with a special safety
device. When the compressor switches o, this
device prevents it from switching on again for
at least 3 minutes.
• WARNING: Changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
SAVE THESE
INSTRUCTIONS
THISPRODUCTISFOR
HOUSEHOLDONLY

5
Preparing for use en
ELECTRICAL CONNECTIONS
Beforepluggingtheapplianceintothetheelectricalreceptacle,
check that:
• The outlet’s power supply corresponds to the value
indicated on the rating label on the back of the appliance;
• The outlet and electrical circuit are adequate for the
appliance;
• Theoutletisa3-holegroundedoutlet.Ifthisisnot
the case, you must choose another outlet.
Failure to follow these important safety instructions
absolves the manufacturer of all liability.
The power cable must be replaced by a qualied
professional only.
The instructions below will enable you to prepare your air
conditioner for operation as eciently as possible.
Before use, make sure the air intake and outlet grilles
are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is ensured with your
air conditioner:
• Screwthehoseadaptor13tothehose’send 12.
• Fittheairexhausthoseinthehousingatthebackofthe
appliance. Insert it as shown in gure A.
• Screw the window outlet  17 to the other end of the
exhaust hose (see g. B).
Sash window
• Openthewindow.
• Placethewindowbracket 15 in the window, extending it
to t the width of the window (g. C).
• Place the air conditioner near the window. Insert the
assembled exhaust hose 12 into the window bracket hole
15.
• Makesuretheairexhausthoseisunobstructed.
• Ifyouhaveaverylargewindow,inordertocoveryour
window aperture, use the additional window bracket
without holes extending it to the desired dimension, then
x the bracket by using the locking pin provided. When
extractingthewindowbracketandjoiningthetwopieces
pay attention you do not cover the hole.
Other set-up methods:
• Thankstothelockingpin,it’spossibletousethewindow
bracket also for sliding windows. Position the hole of the
bracket so to allow a correct installation of the exhaust
hose (see gure D).
Keep the air hoses as short and free of curves as possible to
avoid constrictions.
2
1
2
A
B
C
D

6
en
French window
• After having screwed the window outlet 17 into the air
exhaust hose 12 , open the French window slightly and
position the window outlet 17 as shown in gure E.
SEMIPERMANENT INSTALLATION
If required, your appliance can also be installed semi-
permanently (Fig. F).
Proceed as follows:
• Drill a hole (ø134mm / 5.27 in.) in an outside wall or
through a window pane.
Respect the height and dimensions of the hole given in
gures Fand G.
NOTE: As special tools are required for installation, we suggest
you have the appliance installed by specialized personnel.
KEEP THE AIR HOSES AS SHORT AND FREE OF CURVES AS
POSSIBLE TO AVOID CONSTRICTIONS.
• Fitthewallange11 into the hole.
• Screwthehoseadaptor 13 tothehose’send12.
• Fittheairexhausthoseinthehousingatthebackofthe
appliance as shown in gure A.
• Screwthewallmountingaccessory 14 into the hose 12
(g. H) and t it into the wall ange 11 as shown in g. I.
When the hose 12 is not tted, the hole can be closed with the
ange cap 11 .
NOTE: When installing the air conditioner semi-permanently,
you should leave a door slightly open (as little as 1/2“ (1 cm))
to guarantee correct ventilation.
Preparing for use
2
MAX 39 inches
MAX100 cm
MAX 14 inches
MIN 35 cm
134
5.27 inches
E
H
I
G
in the window pane in the wooden
kickboard of a
French window
in the wall: you are
recommended to
insulate the section
of wall using suitable
insulation.
12 inches
30 cm
30 cm
12 inches
F

7
en
Control panel
O
P
N
IL
M
ST
H
G
Q
ABC R D E F
DESCRIPTION OF THE CONTROL PANEL
A ON/OFF button
B MODE selection button
Air conditioning, dehumidifying, fan.
C Fan speed selection button (MAX/MED/MIN)
D Timer button
E Increase temperature/programmed operation time button
F Decrease temperature/programmed operation time button
G Display Displays the temperature values and the programmed operating time
H Timer in operation indicator light
I/L/M Fan speed lights
N Fan mode light
O Air-conditioning mode light
P Dehumidifying mode light
Q Alarm light
R Remote control receiver
S Light: the inner temperature is shown on the display
T Light: the outdoor temperature is shown on the display
Never turn the air conditioner o by unplugging from the outlet. Always press the button, then wait for a few minutes before
unplugging.Thisallowstheappliancetoperformacycleofcheckstoverifyoperation.

8
en
Operation Using the remote control unit
TURNING THE APPLIANCE ON
Before plugging the appliance check the caps on the back
of the unit are correctly inserted and screwed on the
drainage hose 10.
Plug into the electrical receptacle. Two lines appear on the
display indicating that the appliance is in stand-by. Press the
ON/OFF button (A). When turned on, the air conditioner starts
operating in the same mode as when it was turned o. Press
the MODEbutton (B) until the light corresponding to the desired
mode lights up:
Light(O): air-conditioning mode
Light(P): dehumidifying mode
Light(N): fan mode
AIR CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and
dehumidify the room.
Thedisplayshowstheinnertemperature:thelight(S) turns on.
Tomodifythe settemperature,push the(E) or (F) button to
reachthedesiredtemperature.The(T) light turns on and the
(S) light turns o.
Tochangefrom°Fto°Corviceversa,pressforfewsecondsboth
button Eand F.
After 15 seconds, the inner temperature is shown on the
display.
The(S) light turns on.
Youcanadjustthetemperatureonlyinairconditioningmode.
ThenselectthefanspeedbypressingtheFAN button (C) until
the light corresponding to the required fan speed lights up:
MAX: the air conditioner operates at maximum to
achieve the target temperature as rapidly as
possible
MED: reduces noise levels while maintaining a
comfortable temperature
MIN: for silent operation
The most suitable indoor temperature for the room during
the summer varies from 75°F to 81°F (24 to 27°C). You are
recommended, however, not to set a temperature much below the
outdoor temperature.
FAN MODE
AdjustfanspeedbypressingtheFAN button (C) as described
for the air-conditioning mode.
Remember that the higher the speed, the more air is ltered.
If you select “MIN” speed, less air is ltered but the appliance
is also less noisy.
DEHUMIDIFYING MODE
Ideal for reducing the humidity in a room without lowering or
raising the temperature (spring or autumn, damp rooms, rainy
spells, etc). When the dehumidifying mode is selected, the
light (P) comes on. At the same time, the“MIN”fan speed light
(M) comes on. In this mode, other speeds cannot be selected.
In dehumidifying mode, the appliance MUSTbeset-upinthe
same way as for air conditioning, with the air exhaust hose 12
attached.
PROGRAMMING THE TIMER
Thetimercanbeusedtodelayappliancestartuporshutdown.
Thisavoidswastingelectricitybyoptimisingoperatingperiods.
How to programme delayed start up
• Plugtheapplianceintoanelectricalreceptacleandpress
the ON/OFF button (A), then select the required operating
mode and other settings (temperature, fan speed, etc).
• PresstheON/OFFbutton(A) again to place the appliance
in standby mode.
• Pressthetimerbutton(D).Thetimerlight“H”ashes.
• Usethe+(E) or - (F) buttons to set the number of hours
delaybeforetheappliancecomeson.Thetimeincreasesor
decreases in steps of one hour.
Theindicatorlight(H) ashes until the appliance starts up.
Youcansettheappliancetocomeonwithadelayofupto12
hours.Tocancelthetimerprogramme,pressthetimerbutton
(D)again.Light(H) stops ashing.
How to programme delayed shut down
• Delayedshutdowncanbeprogrammedinanyoperating
mode (air conditioning/fan/dehumidifying).
• Pressthetimerbutton(D).Thetimerlight“H”ashes.
• Usethe+(E) or - (F) buttons to set the number of hours
delay before the appliance goes o.
Thetimeincreasesordecreasesinstepsofonehour.
The light (H) ashes until the appliance turns o as
programmed. At the set time, the air conditioner shuts down
andremainsinstandby.Tocancelthetimerprogramme,press
the timer button (D)again.Light(H) stops ashing.
USING THE REMOTE CONTROL
• Point the remote control at the receiver on the air
conditioner.Theremotecontrolmustbenomorethan
16,4ft (5 meters) away
from the appliance
(without obstacles
between the remote
MAX 16 ft
MAX 5 meters

9
en
Using the remote control unit
control and the receiver).
• Theremotecontrolmustbehandledwithextremecare.
Do not drop it or expose it to direct sunlight or sources of
heat.
DESCRIPTION OF THE REMOTE CONTROL
19) “ON/OFF”button
20) Increase/Decrease button for temperature/programmed
use
21) “MODE” button
22) “TIMER” button
23) °F/°Cscalebutton
24) Fan speed selection button (MAX/MED/MIN).
Inserting or replacing the batteries
• Removethecoverontherearoftheremotecontrol;
• Removetheoldbatteries,ifpresent.
• CorrectlyinserttwonewL03“AAA”1,5Vbatteries(seethe
instructions inside the battery compartment);
• Replacethecover.
If the remote control unit is replaced or discarded,
the batteries must be removed and disposed of in
accordance with current legislation as they are
harmful to the environment. Do not mix old and new
batteries. Do not mix alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries. Do not
dispose of batteries in re. Batteries may explode or
leak. If the remote control will not be used for a certain
length of time, remove the batteries.
• Note:Thisequipmenthasbeentestedandfoundtocomply
withthelimitsforaClassBdigitaldevice,pursuanttopart
15oftheFCCRules.Theselimitsaredesignedtoprovide
reasonable protection against harmful interference in a
residential installation.
• This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
noguarantee thatinterferencewill not occurin a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
 -Consultthedealeroranexperiencedradio/TV
technician for help. Changes or modications not
expresslyapprovedbythepartyresponsibleforcompliance
couldvoidtheuser’sauthoritytooperatetheequipment.
• This device complies with Part 15 of the FCC Rules.
Operationissubjecttothefollowingtwoconditions:(1)
thisdevice maynotcause harmfulinterference, and(2) this
device must accept any interference received, including
interference that may cause undesired operation.
• ThisClassBdigitalapparatuscomplieswithCanadianCAN
ICES-3(B)/NMB-3(B).
TURNING THE APPLIANCE ON
Plug the appliance into the the electrical receptacle.
Press the ON/OFF button (19) (when turned on, the air
conditioner starts operating in the same mode as when it was
turned o).
Press the MODE button (21) to select the required mode
COOLING
DEHUMIDIFYING
FAN ONLY
On the control panel, the light corresponding to the selected
mode comes on.
For air conditioning/dehumidifying/fan only settings and
programming the timer, see page 8.
19 20
21
22
23
24

10
en
Tips/ Cleaning
To get the best from your air conditioner, follow these
recommendations:
• close the windows and doors in the room to be air
conditioned.
 The only exception is when the appliance is installed
through a hole in the wall.
In this case, you are recommended to leave a slight
draught through a door or window to guarantee correct
ventilation.
• Protect the room from direct exposure to the sun by
partially closing curtains and/or blinds to make the
appliance much more economical to run;
• Neverrestobjectsofanykindontheairconditioner;
• Neverobstructtheairintakeoroutletgrilles1-6-8.
• Makesuretherearenoheatsourcesintheroom.
• Neverusetheapplianceinverydamprooms(laundriesfor
example).
• Neverusetheapplianceoutdoors.
• Makesuretheairconditionerisona level oor.
Before cleaning or maintenance, turn the appliance
o by pressing the ON/OFF button (A) or in models with
remote control unit, by pressing the ON/OFF button 19,
then always unplug the appliance from the electrical
receptacle.
CLEANING THE CABINET
Youshouldcleantheappliancewithaslightlydampcloththen
dry with a dry cloth.
For safety reasons, never wash the air conditioner with water.
Precautions
Never use petrol, alcohol or solvents to clean the appliance.
Never spray insecticide liquids or similar.
CLEANING THE AIR FILTER
To keep your air conditioner working eciently, you should
clean the dust lter every week of operation.
Thelterishousedintheintakegrille.
Tocleanthelter,removethelterasshowningureL.
Use a vacuum cleaner to remove the dust collected on the
lter.
If it is very dirty, immerse in warm water and rinse a number
oftimes.Thewatershouldneverbehotterthan104°F(40°C).
After washing, leave the lter to dry. Put the lter back in its
housing.
START OF SEASON CHECKS
Make sure the power cable and plug are undamaged and
the ground connection is ecient. Follow the installation
instructions precisely.
END OF SEASON OPERATIONS
Todrainallwaterfromthecircuit,removetheexternalcapby
unscrewing it in the anticlockwise direction then, remove the
internal cap from the drain hose on the back of the appliance
and allow the water to drain out into a basin (gure M). When
the appliance is empty, replace the caps.
Clean the lter and dry thoroughly before putting back.
close doors and
windows
close blinds or
curtains
do not cover
the appliance
LM

11
en
Troubleshooting
NOTE:
NEVER TRANSPORT OR TURNTHE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT 6 HOURS BEFORE
TURNING THE APPLIANCE ON, 24 HOURS IS RECOMMENDED. (After the unit has been on its side, oil needs to return to the
compressortoensureproperfunction.Withoutallowingtheunitthistime(6-24hours)Theunitmayfunctionforonlyashorttime,
and then the compressor will break down from lack of oil.
PROBLEM CAUSE REMEDY
The air
conditioning unit does not start.
• Noelectricity.
• Itisnotpluggedintotheelectrical
receptacle.
• Thesafetydeviceoftheplughas
tripped.
• Wait.
• Plugintotheelectricalreceptacle.
• Resetthesafetydevice,ifproblem
persists contact our toll free
customer service.
The air
conditioning unit works for a short
time only.
• Theairexhausthosehasaconstric-
tion.
• Theairexhausthoseisblocked.
• Therearetightbendsintheair
exhaust hose.
• Positiontheexhausthosecorrectly.
• Checktherearenoobstaclesthat
obstruct the air discharge.
• Eliminatethetightbends.
The air
conditioner works, but does not
cool the room.
• Windowopen.
• Theexhausthoseisdetached.
• Airlterclogged.
• Closethewindow.
• Connecttheexhausthose.
• Cleanorreplacethelter.
Unpleasant smell in the room • Airpurifyinglterclogged • Cleanorreplacethelters.
The air conditioner does not
operate for about 3 minutes after
turning it on
• Thesafetydevicehastripped • Waitforthreeminutes.
The alarm light Q comes on • Thetankinsidetheapplianceisfull. • Emptythetank(see“Endofseason
operations”on page 10).
IF…IS DISPLAYED, IF…IS DISPLAYED, IF…IS DISPLAYED,
“LowTemperature”
...MEANS: room temperature is too low
“HighTemperature”
...MEANS: room temperature is too high
“Probe Failure”
(sensor damaged)
…MEANS: contact your local customer service
SELF-DIAGNOSIS
Theappliancehasaselfdiagnosissystemtoidentifyanumberofmalfunctions.Errormessagesaredisplayedontheappliance
display.

12
en
Technical specications
TECHNICAL SPECIFICATION
Power supply voltage see rating label
Max. absorbed power
during air conditioning “
Refrigerant “
Cooling capacity “
LIMIT CONDITIONS
Room temperature for
air conditioning 64÷104°F18÷40°C
Transport, lling, cleaning, recovery and disposal
of refrigerant should be performed by a technical
service centre appointed by the manufacturer
only. The appliance should be disposed of by a
specialist centre appointed by the manufacturer
only.
NEVERTRANSPORTORTURNTHE APPLIANCE UPSIDE
DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT 6
HOURS BEFORE TURNING THE APPLIANCE ON, 24
HOURS IS RECOMMENDED. (After the unit has been on
its side, oil needs to return to the compressor to ensure
proper function. Without allowing the unit this time (6-
24hours)Theunitmayfunctionforonlyashorttime,and
then the compressor will break down from lack of oil).
Thisapplianceisequipped witha 3 prong grounded
plug.Theplugmustbeconnectedintoanoutletthatis
properly installed and grounded in the accordance with
all local codes and ordinances. Do not modify the plug
provided with the appliance. If it will not t the outlet,
have a proper outlet installed by a qualied electrician or
relocate the unit to a proper outlet.
If the household electrical supply does not meet the
above specications, or if you are not sure your home
has an eective electrical ground, have a qualied
electrician or your local electrical utility company check
it and correct any problems.
SAFETY PLUG
Theapplianceisttedwithasafetyplugtoprotectthe
power cable.
If power is cut o, unplug from the outlet and make sure
the power cable is undamaged.
If the cable is damaged, call the service center
immediately.
If power cuts o frequently and the power cable is
undamaged, contact a qualied electrician.
OPERATION OF THE SAFETY PLUG
If the safety device incorporated in the plug trips and cuts
o the power supply, check that the power cable and
plug are not damaged.
If the power cable is undamaged, to restore operation
press the“RESET” button.
To verify correct operation of the plug,  press the
“TEST” button periodically and make sure the appliance
disconnects. If this is not the case, contact the service
center.
Torestoreoperation,press the“RESET”button.