Denver SCO-85350 User manual

User manual
SCO-85350
facebook.com/denverelectronics
Before operatin this vehicle, read all the instructions for safe assembly and operations. User’s manual can uide you
throu h the functions and usa e of Electric scooter. Before usin this Electric scooter, familiarize yourself with how to
operate, so that you can keep the Electric scooter in the best condition possible.
This appliance can be used by children a ed from 14 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowled e if they have been iven supervision or instruction
concernin use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleanin and user maintenance shall not be made by children without supervision.
Version 1.0
1

Table of Contents

1 Product and Accessories
Important!
This electric scooter must be char ed and stored in a safe way.
For safety reason and protect battery life, never char e the electric scooter in temperatures below 5 °C
or above 45 °C. Equally, always disconnect the electric scooter with the power cable once fully char ed.
Always use the supplied power adapter to char e the electric scooter.
1. Product and Accessories
Front LED li ht
Back reflector
Disc brake
Disc Brake
Throttle
Foldable
Rear LED li ht
Bell
Display
Electric brake
White reflector
8.5” wheel size
Front shock absorption
White reflector stickers
Valve extension for air tube

Screw for handlebar attachment x 4
Allen key x 2
char er

2 Unfolding and folding the scooter
Unfolding the scooter
1）Place the electric scooter on its wheels like below. Unlock the hook on the handlebar.
2) Pull up the handle in a entle way. Raise the handle slowly.
Close the lock lever located on the lower part of the handlebar support tube.
3) The electric scooter is unfolded as soon as you hear the rod clicks into place.

Folding the scooter
1. Release the release lever located on the lower part of the support tube
of the handlebars.
2. Fully open the release lever.
3. Open the scooter by accompanyin the handlebar tube downwards.
4. Hook the folded tube onto the appropriate support.

3Assembling the device
Before usin the scooter it is necessary to install the handlebar on the frame
main vehicle.
1). Insert the handlebar into the vehicle frame.
2). After matchin the holes in the handlebar with those of the frame,
insert the screws and ti hten them well; repeat the operation also in the side
opposite of the handlebar insertin a total of 4 screws.

Charging the scooter
Connect the supplied power adapter to the char in port of the electric scooter.

Char in port

5 Intended Use
The Electric scooter is neither a means of transport nor sports equipment, but a device for personal
entertainment. The Electric scooter for domestic use only and only by a person aged at least 1 with a
maximum weight of 120 kg. The other parameters for the permissible operation of the Electric scooter are
defined in the section (“10. List of parameters”) . Importantly, the Electric scooter may only be operated in
good visibility conditions and only if the physical conditions for stability on the Electric scooter are met (for
example, not on one leg/not under the influence of drugs or alcohol). When operating the electric scooter,
the operator must wear personal protective equipment specified in the section (“13. Warnings” > 13.2
Preparation”).
6 Safety Instruction
We recommend always wearin helmet and protective ear like elbow, knee and wrist protectors to ensure
your personal safety.
Also make sure you have read the user manual carefully, to ensure you know how to ride it in a safe and
fun way.
The Electric scooter is for domestic use only.
It is your responsibility to be aware of and comply with all re ulations. If there are no re ulations for this
Electric scooter in your country, please take care of your own safety and the safety of others.
Also pay attention to other people. Always ride safely and only at a speed that allows you to brake safely
at any time. A common thin for such products is that there is a risk that you may fall off the product and
injure yourself. Always ride as safely as possible.
If lendin the electric scooter to friends and family, please make sure they use proper protective ear and
know how to ride it.
Before ridin the electric scooter, please check that all parts are workin as supposed to. If any loose
parts, abnormal noise, reduced battery life etc. are detected, please contact your retailer for product
service and warranty. Do not repair the electric scooter yourself.
Inspect the rear tire, rear brake, and brake pad accordin to Section 7 of the maintenance specification
in this operatin instructions. The electric scooter may become unstable if the rear brake is deformed or
loose. This is because the distance between the brake pad and the rear wheel becomes too small,
possibly leadin to a blocked rear wheel.
Avoid applyin too much force or steppin on the rear fender permanently. This may cause the fender to
loosen or dama e the sprin holdin the fender.
As a result, the brake pad constantly touches the wheel and the motor temperature increases due to the
additional resistance. The rear tire can also et loose if the brake is in constant brakin position.