DHS Fitness 7150 User manual

MANUAL DE UTILIZARE
DHS 7150
IMPORTANT!
VA RUGAM SA CITITI CU ATENTIE ACEST MANUAL INAINTE DE A FOLOSI
APARATUL.
PASTRATI ACEST MANUAL PENTRU REFERINTA VIITOARE.

2
Instructiuni de siguranta
Va multumim ca ati ales acest produs. Pentru a va garanta siguranta si sanatatea
dumneavoastra, va rugam sa folositi corect aparatul. Va rugam sa cititi cu atentie
acest manual inainte de a folosi aparatul.
1. Este important sa cititi intregul manual inainte de a incepe asamblarea si de a
folosi aparatul. Aparatul poate fi folosit in siguranta si eficient doar daca acesta a
fost asamblat, intretinut si folosit adecvat. Este responsabilitatea dumneavoastra
sa va asigurati ca toti utilizatorii aparatului au fost informati cu privire la
atentionarile si precautile care trebuie respectate.
2. Inainte de a incepe antrenamentul, consultati doctorul pentru a va asigura ca nu
aveti nici o problema medicala sau fizica care ar putea sa va puna in pericol
sanatatea si siguranta sau care ar putea sa va impiedice sa folositi corect aparatul.
Urmati sfaturile doctorului daca sunteti sub tratament care va poate afecta ritmul
batailor inimii, tensiunea sau nivelul colesterolului.
3. Tineti cont de semnalele transmise de organism. Efectuarea de exercitii incorecte
sau excesive va poate afecta sanatatea. Intrerupeti antrenamentul daca aveti
oricare dintre simptomele: durere in piept, respiratie neregulata, intreruperea
respiratiei, ameteala sau greata. In acest caz trebuie sa consultati doctorul inainte
de a va continua antrenamentul.
4. Nu lasati copiii sau animalele in preajma aparatului. Acest aparat a fost creat
pentru a fi folosit doar de catre adulti.
5. Asezati aparatul pe o suprafata solida, plana, acoperita pentru a va proteja
podeaua sau covorul. Pentru a fi in siguranta, asigurati-va ca pastrati o distanta
minima de 0.6 m in jurul aparatului.
6. Inainte de a incepe antrenamentul, verificati daca toate piesele: suruburi, piulite si
saibe, sunt fixate si stranse corect.
7. Daca auziti vreun zgomot in timpul asamblarii sau a utilizarii, incheiati
antrenamentul imediat. Nu folositi aparatul pana cand nu a fost remediata
problema.
8. Purtati haine si incaltaminte adecvata pentru antrenament. Evitati purtarea
hainelor largi care s-ar putea agata de aparat sau care v-ar putea restrictiona sau
impiedica miscarea.
9. Acest aparat a fost conceput pentru a fi folosit acasa si in spatiu interior.
Greutatea maxima permisa a utilizatorului este 120 KG.
10. Aveti grija sa nu va afectati spatele atunci cand ridicati sau mutati aparatul.
11. Acest produs nu este potrivit pentru a fi folosit in scop terapeutic.

3
LISTA PARTILOR COMPONENTE:
6
17
56
53
2
8a
57a
57b
58a
58b
48
6
53
7
55
32
33
6
59
59
1
212
2
2
3
4
5
6
7
4
5
9
8
10
11
12
13
14
15
7
6
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 31
32
633
34
35
55
36
37
39
38
40
41
36
42
43
44
45
46
47
48
27
27
27
49
50
51
51 52
53
54

4
LISTA PARTILOR COMPONENTE:
No.
Description
Qty
No.
Description
Qty
1
Protectie burete Φ23*3*210
2
30
Bolt ST3*10*Φ5.6
2
2
Dop Φ25*16
6
31
Senzor
1
3
Maner
1
32
Roata dintata intermediara pe
sina de alunecare
4
4
Bolt M6*40*S5
4
33
Piulita M8*H7.5*S13
6
5
Saiba d6*Ф16*1.5*R16
4
34
Rotita delimitatoare Φ
31.5*34*Φ12.5
2
6
Saiba d8*Φ16*1.5
14
35
Bucsa Ф12*Ф8*38
2
7
Bolt M8*20*S5
8
36
Protectie Φ23*Φ12*37
2
8
Computer
1
37
Bolt M10*24*S6
1
9
Suport computer 333*264*23.5
1
38
Saiba arc d10
1
10
Bolt ST4.8*13*Φ8
4
39
Saiba Φ10.8*Φ38*5.2
1
11
Protectie cot
2
40
Bucsa Φ38*2*Φ25.8
2
12
Saiba d6*Φ16*1.5
4
41
Pin arc M16*1.5*18*Φ37
1
13
Bolt M6*15*S5
4
42
Suport decorativ Φ68.3*12
2
14
Placa fata decorativa
1
43
Clema arc φ25*φ4*87
2
15
Tija suport fata
1
44
Opritor mare Φ74*20
1
16
Saiba d8*Φ16*1.5*R16
2
45
Placa suport genunchi
1
17
Bolt M8*16*S5
6
46
Opritor mic Φ25*20.5
4

5
18
Tija support inferioara
1
47
Bolt M5*10*Φ10
4
19
Bolt M6*48*20*S10
2
48
Saiba d5*Φ10*1
4
20
Roata dimtata intermediara Φ
23*32*Φ6
2
49
Bara stabilizatoare spate
1
21
Saiba d6*Φ12*1.2
2
50
Protectie Φ32*24*Φ9*R25
2
22
Piulita M6*H6*S10
2
51
Protectie sprijin bata
stabilizatoare spate Φ24*19
2
23
Capac piulita S17
4
52
Bolt M10*35*15*H6
4
24
Piulita M10*H9.5*S17
4
53
Saiba arc d8
8
25
Saiba d10*Φ25*2*R30
4
54
Saiba d5*Φ10*1
4
26
Bara stabilizatoara fata
1
55
Bolt M8*75*13*S5
4
27
Dop ZT62*27*1.4
4
56
Bolt M8*50*15*S5
2
28
Dop Φ37*29
4
57a/b
Fir trunchi 1
1
29
Sina alunecare
1
58 a/b
Fir trunchi 2
1
59
Manson plastic Φ14*88
2

6
INSTRUCTIUNI DE ASAMBLARE
PASUL 1：
29
49
23
24
25
52
#24 M10*H9.5*S17 2pcs
#23 S17 2pcs
Fixati bara stabilizatoare spate pe sina de alunecare (29) folosind boltul (52), saiba
(25) si piulita (24), apoi atasati capacul piulitei (23)

7
PASUL 2：
15
24
52
23
52
25
#24 M10*H9.5*S17 2pcs
26
#23 S17 2pcs
Fixati bara stabilizatoare fata (26) pe tija suport fata (15) folosind boltul (52), saiba
(25) si piulita (24), apoi atasati capacul piulitei (23).

8
PASUL 3：
7
6
#17 M8*16*S5 2pcs
#6 d8*Φ16*1.5 2pcs
16
17 18
#7 M8*20*S5 2pcs
#16 d8*Φ20*2*R16 2pcs
S5
15
29
53
#53 d8 2pcs
57a
31
59
#59 Φ14*88 1pc
1. Fixati sina de alunecare (29) pe tija support fata (15) folosind boltul (7), saiba
arc (53)si saiba (6).
2. Fixati tija suport inferioara (18) pe sina de alunecare (29) folosind boltul (17) si
saiba (16).
3. Conectati firul senzorului (31) folosind firul trunchiului 1 (57a), apoi atasati
mansonul de plastic (59)

9
PASUL 4:
6
7
3
#6 d8*Φ16*1.5 4pcs
#7 M8*20*S5 4pcs
7
6
S5
15
53
#53 d8 4pcs
58b
8a
59
#59 Φ14*88 1pc
1. Fixati manerul (3) pe tija suport fata (15) folosind boltul (7), saiba arc (53) si
saiba (6).
2. Conectati firul trunchiului 2 (58a) folosind firul computerului (8a) si atasati
mansonul de plastic (59).
Asamblarea este completa.

USER’S MANUAL
Important!
Please read this manual carefully before
use this equipment.

IMPORTANT SAFETY NOTICE
Thank you for purchasing our product. Proper use can ensure your safety and health, so please
read the following text carefully before using this equipment.
1. It is very important to read all the instructions carefully before assembling or operating this
product. Your exercise will be safe and effective only if you assembly, maintain and use this
equipment properly,
2. Before beginning any exercise program, consult your personal physician to evaluate your present
fitness level and determine whether the exercise will hurt your health or not. It is essential to
consult your doctor if you are under treatment for pulse、blood pressure or cholesterol.
3. Pay attention to signals of your own body. Incorrect and superfluous exercise will hurt your health.
If you experience any pain or tightness in your chest, irregular heartbeats, short breath, faintness,
nausea or any other unusual discomfort while exercising, stop immediately and consult your
doctor if you want to continue.
4. Please keep children and pets away from this equipment; it is only designed for adults.
5. To protect your ground and carpet, please put a firm and level material under this product. In
order to ensure safety, please make sure to keep 0.6m free space around the equipment.
6. Please check that all hardware parts such as bolts, nuts and washers are positioned and secured
firmly.
7. Be carefully while using this equipment. Please stop exercise immediately if you find any problem
or sound with the equipment when assembling or using it, and don’t use it till these problems are
solved.
8. Always wear suitable clothing and footwear during exercise to avoid loose fitting clothing
entangled with the moving parts of your exercise machine or restricted your exercise.
9. This equipment is intended for home or indoor use only. The maximum weight capacity of this
equipment is 120KG.
10. To avoid unnecessary injury, please be more carefully when moving this equipment.
11. The equipment is not suitable for therapeutic use.

Exploded view
6
17
56
53
2
8a
57a
57b
58a
58b
48
6
537
55
32
33
6
59
59
1
212
2
2
3
4
5
6
7
4
5
9
8
10
11
12
13
14
15
7
6
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 31
32
633
34
35
55
36
37
39
38
40
41
36
42
43
44
45
46
47
48
27
27
27
49
50
51
51 52
53
54

Parts list
No.
Description
Qty
No.
Description
Qty
1
Foam grip Φ23*3*210
2
30
Bolt ST3*10*Φ5.6
2
2
End cap Φ25*16
6
31
Sensor
1
3
Handlebar
1
32
Idler wheel on slide rail
4
4
Bolt M6*40*S5
4
33
Nut M8*H7.5*S13
6
5
Washer d6*Ф16*1.5*R16
4
34
Wheel for limitΦ
31.5*34*Φ12.5
2
6
Washer d8*Φ16*1.5
14
35
Bushing Ф12*Ф8*38
2
7
Bolt M8*20*S5
8
36
Limit cushionΦ23*Φ12*37
2
8
Computer
1
37
Bolt M10*24*S6
1
9
Board for computer
333*264*23.5
1
38
Spring washer d10
1
10
Bolt ST4.8*13*Φ8
4
39
Washer Φ10.8*Φ38*5.2
1
11
Elbow pad
2
40
Bushing Φ38*2*Φ25.8
2
12
Washer d6*Φ16*1.5
4
41
Spring pin M16*1.5*18*Φ37
1
13
Bolt M6*15*S5
4
42
Support decoration Φ68.3*12
2
14
Front decorative board
1
43
Spring clipφ25*φ4*87
2
15
Front support tube
1
44
Big stopper Φ74*20
1
16
Washer d8*Φ16*1.5*R16
2
45
Board for hassock
1
17
Bolt M8*16*S5
6
46
Small stopperΦ25*20.5
4
18
Lower support tube
1
47
Bolt M5*10*Φ10
4
19
Bolt M6*48*20*S10
2
48
Washer d5*Φ10*1
4
20
Idler wheel Φ23*32*Φ6
2
49
Rear stabilizer
1
21
Washer d6*Φ12*1.2
2
50
Cushion Φ32*24*Φ9*R25
2

22
Nut M6*H6*S10
2
51
Support pad for Rear
stabilizer Φ24*19
2
23
Nut coverS17
4
52
Bolt M10*35*15*H6
4
24
Nut M10*H9.5*S17
4
53
Spring washer d8
8
25
Washer d10*Φ25*2*R30
4
54
Washer d5*Φ10*1
4
26
Front stabilizer
1
55
Bolt M8*75*13*S5
4
27
End cap ZT62*27*1.4
4
56
Bolt M8*50*15*S5
2
28
End capΦ37*29
4
57a/b
Trunk line1
1
29
Slide rail
1
58 a/b
Trunk line2
1
59
Plastic sleeveΦ14*88
2

Assembly
Step 1：
29
49
23
24
25
52
#24 M10*H9.5*S17 2pcs
#23 S17 2pcs
Lock the rear stabilizer to slide rail (29) with bolt (52), washer (25) and nut (24) and
then attach the nut cover (23)

Step 2：
15
24
52
23
52
25
#24 M10*H9.5*S17 2pcs
26
#23 S17 2pcs
Lock the front stabilizer (26) to front support tube (15) with bolt (52), washer (25) and
nut(24) and then attach the nut cover(23)

Step 3：
7
6
#17 M8*16*S5 2pcs
#6 d8*Φ16*1.5 2pcs
16
17 18
#7 M8*20*S5 2pcs
#16 d8*Φ20*2*R16 2pcs S5
15
29
53
#53 d8 2pcs
57a
31
59
#59 Φ14*88 1pc
1. Lock the slide rail (29) to front support tube (15) with bolt (7), washer (53) and
washer(6).
2. Lock the lower support tube (18) to slide rail (29) with bolt (17), washer (16).
3. Connect the sensor line (31) with trunk line1 (57a) and then attach plastic sleeve
(59)

Step 4:
6
7
3
#6 d8*Φ16*1.5 4pcs
#7 M8*20*S5 4pcs
7
6
S5
15
53
#53 d8 4pcs
58b
8a
59
#59 Φ14*88 1pc
1. Lock the handlebar (3) to front support tube (15) with bolt(7),washer(53) and
washer(6).
2. Connect the trunk line2 (58a) with computer line (8a) and attach the plastic sleeve
(59), assembly finished.