DIEBOLD NIXDORF BEETLE/iSCAN EASY eXpress Plus Use and care manual

BEETLE /iSCAN EASY eXpress+
Self-Checkout System
Integration Manual (January 2018)

All of the product names mentioned in this document are registered trademarks.
Copyright © Wincor Nixdorf International GmbH, 2018
All rights, including rights to full or partial translation, reprinting and transmission or copying by any
means, are reserved.
Offenders are liable to payment of damages. All rights, including those granted by registration of a
patent, utility model or design, are reserved.

Contents
1Notes................................................................................................................................ 1
2Technical Data .................................................................................................................. 2
2.1 System......................................................................................................................................... 2
3Dimensions (mm).............................................................................................................. 3
3.1 Back Side 15” and 19” Version.................................................................................................... 3
3.2 15” Version.................................................................................................................................. 4
3.3 15“ Version with Table Stand...................................................................................................... 5
3.4 19” Version.................................................................................................................................. 6
3.5 19“ Version with table Stand ...................................................................................................... 6
3.6 Bottom side................................................................................................................................. 7
3.7 Device with open door................................................................................................................ 7
4Vertical mounting ............................................................................................................. 8
5Ventilation of the system .................................................................................................. 9
6System suspension.......................................................................................................... 11
7Cabeling of external devices ............................................................................................ 12
8Installation of additional peripherals ............................................................................... 13
9Pole and Wall mounting .................................................................................................. 15
9.1 Dimensions................................................................................................................................ 15
9.1.1 Optional bottom plate .............................................................................................................. 15
9.1.2 Pole bottom hole pattern ......................................................................................................... 15
9.1.3 Pole with 15” BEETLE /iScan EASY eXpress+............................................................................. 16
9.1.4 Pole with 19” BEETLE /iScan EASY eXpress+ and optional basket-shelves on both sides,
pole light, coupon box and bottom plate ................................................................................. 16
9.1.5 Pole with 19” BEETLE /iScan EASY eXpress+ and optinal basket scale front ............................ 17
9.1.6 Wallmount with 15” BEETLE /iScan EASY eXpress+.................................................................. 17
9.1.7 Wallmount with 19” BEETLE /iScan EASY eXpress+.................................................................. 18
9.2 Assembling Instructions: pole mounted self Checkout ............................................................ 19
9.2.1 Self-Checkout with floor cabling ............................................................................................... 19
9.2.2 Self-Checkout with floor cabling with optional bottom plate .................................................. 24
2. Mark the 4 holes as bearing points........................................................................................... 25
9.3 Self Checkout with over-floor cabling....................................................................................... 26
9.4 Assembling Instruction: Wall-mounted .................................................................................... 28
9.4.1 Requirements............................................................................................................................ 28
9.4.2 Hole pattern for wallmount (dimensions in mm) ..................................................................... 28
9.4.3 Mounting the wall-adapter....................................................................................................... 29
10 Block diagram ................................................................................................................. 31

BEETLE /iSCAN EASY eXpress+Integration Manual
1
1Notes
Find further informations in the BEETLE /iSCAN Express+ installation manual on the Diebold Nixdorf
Internets.
Use an angled power cord when installing the unit in
the table adapter or when mounting
it on a column or wall.

Integration Manual BEETLE /iSCAN EASY eXpress+
2
2Technical Data
2.1 System
Mains input voltage
100-240 V~ / 60-50Hz
Power consumption 1.4-0.7A
Power typical ca. 55W
Power max. ca. 87W
Power standby ca. 1.5W
Weight 15” Version 28 Kg
Weight 19” Version 30 kg
Operating temperature
Ambient temperature: 5° C – 35° C
Humidity: 5% r.h. (1 g/m3) – 85% r.h. (25 g/m3)
Temperature change: 0.5 K/min (max. 7.5K/30 min)
Barometric pressure: 70 kPa – 106 kPa
(70kPa corresponds to an installation at approximately 2000 meters above sea level) Installa-
tion environments with long periods of sunshine should be avoided
Storage conditions
Ambient temperature: 5° C – 40° C
Humidity: 5% r.h. (1 g/m3) – 85% r.h. (25 g/m3) 0.5 K/min
Temperature change: 0.5 K/min (max. 7.5K/30 min)
Transport conditions
Ambient temperature: -25 °C – 60° C
Humidity: 15% r.h. (1 g/m3) – 98% r.h. (32 g/m3)
Temperature change: -25° C / 25° C

BEETLE /iSCAN EASY eXpress+Integration Manual
3
3Dimensions (mm)
3.1 Back Side 15” and 19” Version

Integration Manual BEETLE /iSCAN EASY eXpress+
4
3.2 15” Version

BEETLE /iSCAN EASY eXpress+Integration Manual
5
3.3 15“ Version with Table Stand

Integration Manual BEETLE /iSCAN EASY eXpress+
6
3.4 19” Version
3.5 19“ Version with table Stand

BEETLE /iSCAN EASY eXpress+Integration Manual
7
3.6 Bottom side
3.7 Device with open door
Service area

Integration Manual BEETLE /iSCAN EASY eXpress+
8
4Vertical mounting
The BEETLE /iSCAN EASY eXpress+ may be installed vertically or at an angle of up to 23° from the ver-
tical.
Danger of entering liquids!
When mounted vertically in a restaurant environment, a suitable device must be used to
prevent drinks from being deposited on the appliance.
Liquids can cause irreparable damage to the device!

BEETLE /iSCAN EASY eXpress+Integration Manual
9
5Ventilation of the system
Keep the ventilation openings of the unit free to ensure good ventilation. This avoids excessive tem-
perature rise.
Even if you want to install the device, it is imperative that you maintain the minimum distances indi-
cated below and ensure reliable ventilation.
The immediate ambient temperature of the system must not exceed 35 °C.

Integration Manual BEETLE /iSCAN EASY eXpress+
10
Observe the specified minimum clearances for reliable ventilation!
Always keep the ventilation slots clear of obstructions to ensure proper air circulation and prevent
overheating.
15“ Version
19“ Version
50mm
60mm
50mm
150mm

BEETLE /iSCAN EASY eXpress+Integration Manual
11
6System suspension
4 positions for fastening
with screws with a
diameter of 6mm
4 positions for fas-
tening with hook, a
additional fixation
with screws is
necessary!

Integration Manual BEETLE /iSCAN EASY eXpress+
12
7Cabeling of external devices
On the bottom side of the device there is an opening on the right and left side, which is
closed by covers.
One of the apertures allows cable entry with edge protection. The apertures can be
exchanged for each other.
Covers for the cabeling
of external devices
Fixing of the cable
possible (strain relief)
Cable duct

BEETLE /iSCAN EASY eXpress+Integration Manual
13
8Installation of additional peripherals
The housing of the BEETLE /iSCAN EASY eXpress+ has two M4 threads on each side of the body for
attaching extensions, such as holders for hand-held scanners, advertising media etc., on both sides of
the body.
When installing, it is important to ensure that the opening of the door and access to the locking
system are not obstructed.
The M4 threads must never be used to mount the unit on a wall.
When installing, it is important to ensure that the opening of the door and access to the
locking system are not obstructed.

Integration Manual BEETLE /iSCAN EASY eXpress+
14

BEETLE /iSCAN EASY eXpress+Integration Manual
15
9Pole and Wall mounting
9.1 Dimensions
9.1.1 Optional bottom plate
9.1.2 Pole bottom hole pattern

Integration Manual BEETLE /iSCAN EASY eXpress+
16
9.1.3 Pole with 15” BEETLE /iScan EASY eXpress+
9.1.4 Pole with 19” BEETLE /iScan EASY eXpress+ and optional basket-
shelves on both sides, pole light, coupon box and bottom plate