DIEBOLD NIXDORF BEETLE M1350 User manual

BEETLE M1350
Operator Manual
01750349439 B
Public
This document is property of Diebold Nixdorf and is intended for customer use. A written license
agreement with Diebold Nixdorf is not required to use this material.

Copyright © Diebold Nixdorf. Copyright protection is claimed for each revision listed in the document his-
tory, as of the date indicated. All Rights Reserved.
This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-
lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and
patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-
istration of a utility model or design, are reserved.
No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-
ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give
rise to a claim for damages.
If the document pages state the information is confidential (or words of similar import), then this
document is intended solely for the use of the employees or other personnel of Diebold Nixdorf
unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without
the express written consent of Diebold Nixdorf are prohibited.
This document should be treated as confidential material for security reasons. Any unauthorized
disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions
of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-
tions throughout the world, and may be punishable by fine and imprisonment.
This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.
In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-
ages of any nature resulting from the use of information in this manual. The information contained in this
document is subject to change without notice. When using the document for system implementation,
please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.
Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that
appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights
thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold
Nixdorf products by the owners thereof.
Your use of this document and/or any of the information contained herein constitutes your agreement to
all of the terms stated on this page.
Copyright © 2022, Diebold Nixdorf
01750349439 B
ii

Table-1: Document History
Material Number Date Remarks
01750349439 A 12/2021 Original edition including TSE description
01750349439 B 02/2022 Corrected TSE function
Copyright © 2022, Diebold Nixdorf
01750349439 B
iii

Table of Contents
1 Introduction ................................................................................................................................ 1-1
1.1 About this manual ..............................................................................................................1-1
1.2 Signs, markings and symbols ............................................................................................1-2
2 Safety .......................................................................................................................................... 2-1
2.1 General safety instructions for the component...................................................................2-1
2.2 ESD (Electrostatic Sensitive Devices) ...............................................................................2-2
3 Basic Settings ............................................................................................................................ 3-1
4 Overview ..................................................................................................................................... 4-1
4.1 ID Plates and Serial Numbers............................................................................................4-1
4.2 Front View ..........................................................................................................................4-3
4.3 Back View ..........................................................................................................................4-4
4.4 Top View ............................................................................................................................4-5
4.5 Inside View.........................................................................................................................4-6
4.6 AC Power Adapter .............................................................................................................4-7
5 Connecting/Disconnecting Cables........................................................................................... 5-1
6 Storage Media ............................................................................................................................ 6-1
6.1 Replacement of Solid State Disk (SSD).............................................................................6-2
6.2 Replacement of the RAM ...................................................................................................6-3
7 Technical Security Device (TSE) .............................................................................................. 7-1
8 Installation .................................................................................................................................. 8-1
8.1 The Tools You Need ..........................................................................................................8-1
8.2 Required Space .................................................................................................................8-2
8.3 Mounting Steps for Optional Wall Plate .............................................................................8-3
9 Replacement of the Lithium Battery ........................................................................................ 9-1
10 Starting Up the System ............................................................................................................. 10-1
11 POST Code ................................................................................................................................. 11-1
12 Technical Data............................................................................................................................ 12-1
12.1 BEETLE M1350 .................................................................................................................12-1
12.2 AC Power Adapter .............................................................................................................12-2
12.3 Total Available Power ........................................................................................................12-3
13 Certifications of the Manufacturer ........................................................................................... 13-1
14 Disposal ...................................................................................................................................... 14-1
Copyright © 2022, Diebold Nixdorf
01750349439 B
iv

Table of Contents
List of Figures
Figure 4-1 Position of plates....................................................................................................4-1
Figure 4-2 Type plate...............................................................................................................4-2
Figure 4-3 Service plate...........................................................................................................4-2
Figure 4-4 FCC plate ...............................................................................................................4-2
Figure 4-5 BEETLE M1350 Front View ...................................................................................4-3
Figure 4-6 BEETLE M1350 Back View....................................................................................4-4
Figure 4-7 BEETLE M1350 Top View......................................................................................4-5
Figure 4-8 BEETLE M1350 Inside View ..................................................................................4-6
Figure 4-9 AC power adapter ..................................................................................................4-7
Figure 5-1 USB-C connector ...................................................................................................5-1
Figure 5-2 4 pin power plug.....................................................................................................5-2
Figure 5-3 RJ plug ...................................................................................................................5-2
Figure 5-4 USB plug ................................................................................................................5-3
Figure 6-1 Removing the screws from the housing .................................................................6-1
Figure 6-2 Removing the cover upwards.................................................................................6-1
Figure 6-3 Removing the SSD.................................................................................................6-2
Figure 6-4 Replacing the SSD.................................................................................................6-2
Figure 6-5 Removing the RAM ................................................................................................6-3
Figure 6-6 Replacing the RAM ................................................................................................6-3
Figure 7-1 Preparing the Beetle for the TSE module...............................................................7-1
Figure 7-2 Unlocking the cover................................................................................................7-2
Figure 7-3 Inserting the SD card..............................................................................................7-2
Figure 7-4 Pre-assembling the TSE module............................................................................7-3
Figure 7-5 Inserting the TSE module.......................................................................................7-3
Figure 7-6 Fixing the TSE module...........................................................................................7-4
Figure 8-1 Mounting Options ...................................................................................................8-2
Figure 8-2 Mounting the back plate .........................................................................................8-3
Figure 8-3 Hooking the device.................................................................................................8-3
Figure 8-4 Fixing the device ....................................................................................................8-4
Copyright © 2022, Diebold Nixdorf
01750349439 B
v

Table of Contents
List of Tables
Table -1 Document History...................................................................................................-iii
Table 1-1 Warning signs used................................................................................................1-2
Table 4-1 Front Panel Functions ............................................................................................4-3
Table 12-1 Technical Data BEETLE M1350.............................................................................12-1
Table 12-2 AC Power Adapter..................................................................................................12-2
Table 12-3 Total available power .............................................................................................12-3
Copyright © 2022, Diebold Nixdorf
01750349439 B
vi

1
1 Introduction
1.1
1.1 About this manual
This documentation is intended to help you to work with the BEETLE M1350 system and to serve as a
reference work. The detailed table of contents will help you find the desired information quickly and eas-
ily.
WARNING
This symbol is used for warnings.
NOTE
Notes in this manual are marked by this symbol.
The type and scope of application programs depend on the customer’s own selection; therefore, soft-
ware will not be discussed further in this manual.
Copyright © 2022, Diebold Nixdorf
01750349439 B
1-1

Introduction
1.2
1.2 Signs, markings and symbols
The following designations can be used in this manual or on the device.
Table1-1: Warning signs used
Warning signs
General information
Warning signs
Warning of
electrical voltage
Warning of
hot surface
Copyright © 2022, Diebold Nixdorf
01750349439 B
1-2

2
2 Safety
2.1
2.1 General safety instructions for the component
NOTE
Read this entire manual carefully in order to obtain a thorough knowledge with respect
to the system and the components, in addition to their operation and maintenance.
Operate the system and the components correctly in accordance with this manual in or-
der to avoid injuries and damage.
Keep this manual available and consult it for guidance when you are unsure about how
to carry out one or another of the procedures.
DANGER
Electrical voltage
Risk of fatal injury through contact with parts carrying electrical voltage! Switch the sys-
tem off before performing any cleaning or maintenance tasks.
lSwitch off the power switch for the power distributor.
lDisconnect the mains connection.
lDisconnect the connector of the power supply cable from the electrical socket in-
stalled by the building contractor.
DANGER
Repairs
Repair work on the system or on the components may be carried out only by authorized
specialist staff. Unauthorized opening of the system or repair work carried out improp-
erly could result in considerable danger to the user.
In case of noncompliance, Diebold Nixdorf excludes all liability.
Copyright © 2022, Diebold Nixdorf
01750349439 B
2-1

Safety
2.2
2.2 ESD (Electrostatic Sensitive Devices)
Components containing electrostatic sensitive devices (ESDs) may be identified by this
label.
When installing a module or drive, please follow the following instructions, which pertain to all electro-
static sensitive devices (ESDs):
• Always use the antistatic kit.
• Statically discharge yourself, for example by touching an earthed object (such as a heat radiator) be-
fore beginning to work with ESD-labelled components.
• Likewise, all equipment and tools used in working with such components must be free of static
charge.
• Pull the mains plug before inserting or removing such components.
• Only handle such components by their edges.
• Never touch any terminal pins of the strip conductors on such components.
Copyright © 2022, Diebold Nixdorf
01750349439 B
2-2

3
3 Basic Settings
Components
The BEETLE M1350 comes with a 15W of the following processor options with configurable memory and
SSD options.
Processor Type
Whiskey Lake 15W Processor Options:
• Celeron 4305UE
• Core i3-8145UE
• Core i5-8365UE
Memory Options
• DDR4 1866/2133/2400 MT/s SODIMM up to 32 GB
M.2 SSD Options
• 128 GB
• 256 GB
• 512 GB
• 1 TB
Copyright © 2022, Diebold Nixdorf
01750349439 B
3-1

4
4 Overview
4.1
4.1 ID Plates and Serial Numbers
Figure4-1: Position of plates
1FCC plate 2Type plate
3Service plate
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-1

Overview
Figure4-2: Type plate
Example for type plate
Figure4-3: Service plate
Example for service plate
Figure4-4: FCC plate
Example for FCC plate
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-2

Overview
4.2
4.2 Front View
Figure4-5: BEETLE M1350 Front View
1Power Button 2Power LED
3USB 2.0 4Activity LED
Table4-1: Front Panel Functions
Designation Specification
Power Button Single Press: On/Off
Power LED The Power LED lights orange when the system has been shut down and is
in power mode S5. During shutdown, it takes a few seconds before the
color change occurs.
The Power LED lights green when the system is on and running (S0) or
flashes green when the system is in the "Energy Saving" mode (S3, S4).
Acitivity Indicator LED Off: No activity
LED yellow blinking: Activity is configured in BIOS
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-3

Overview
4.3
4.3 Back View
Figure4-6: BEETLE M1350 Back View
1LAN 2COM 1
3COM 2 4USB 2.0
5USB 3.1 6Power in DC 24V
7Cash drawer 8USB type C PD 5/12/24V, DP
9USB type C PD 5/12V, DP
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-4

Overview
4.4
4.4 Top View
CAUTION
Risk of burns due to hot surface
The device heats up during operation.
Touching the hot surface can cause burns.
lWait until the surface has cooled down.
lWear protective gloves.
Figure4-7: BEETLE M1350 Top View
1Heat Sink
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-5

Overview
4.5
4.5 Inside View
Figure4-8: BEETLE M1350 Inside View
1SODIMM socket 2M.2 2280 socket
3M.2 2280 socket
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-6

Overview
4.6
4.6 AC Power Adapter
Figure4-9: AC power adapter
1DC power out 2Power indicator
3AC power adapter 4AC power plug
The external power supply is applicable for common line voltage.
It automatically adjusts itself to the particular voltage.
Copyright © 2022, Diebold Nixdorf
01750349439 B
4-7

5
5 Connecting/Disconnecting Cables
Connecting cables
The installation of the system should be performed in the following order:
• Plug all data communication cables and fix them.
• Connect the power supply unit via a DC cable with the BEETLE M1350.
• Connect the power cord of the power supply unit with the surge protector sockets of the housing in-
stallation.
Disconnecting cables
Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the proce-
dure below when disconnecting cables:
• Turn off all power and equipment switches.
• Remove the cable cover.
• Unplug all power plugs from the grounded-contact power sockets.
• Unplug all data communication cables from the sockets of the data networks.
• Unplug all cables from the devices.
NOTE
Never connect data cables when the system is switched on.
Figure5-1: USB-C connector
• Manually tighten or loosen the knurled thumb
screw of the USB-C connector.
Copyright © 2022, Diebold Nixdorf
01750349439 B
5-1

Connecting/Disconnecting Cables
Figure5-2: 4 pin power plug
• With 4 pin power plugs, the plug remains in-
serted until released.
• Pull the plastic covering from the connecting
socket with your thumb.
• The lock is released. The metal of the plug is
visible.
Figure5-3: RJ plug
• RJ plugs lock in place when plugged in.
• To release a RJ plug push down the latch.
Copyright © 2022, Diebold Nixdorf
01750349439 B
5-2