DIEBOLD NIXDORF BEETLE A1150 User manual

BEETLE A1150
User Manual
01750342843A

Table of Contents
1 Manufacturer´s Certification ..................................................................................................... 1-1
1.1 FCC-Class A Declaration ...................................................................................................1-1
1.2 Energy Efficiency ...............................................................................................................1-1
1.3 Wireless Declaration of Conformity....................................................................................1-2
1.4 FCC RF exposure warning.................................................................................................1-4
1.5 Radio Frequency (RF) Exposure Information ...................................................................1-4
1.6 Important Notes..................................................................................................................1-5
1.7 Safety Notes.......................................................................................................................1-6
2 Supplier’s Declaration of Conformity ...................................................................................... 2-1
3 Introduction ................................................................................................................................ 3-1
3.1 About this manual ..............................................................................................................3-1
3.2 Care of the BEETLE A1150 ...............................................................................................3-1
3.3 Recycling the BEETLE A1150 ...........................................................................................3-1
3.4 Warranty.............................................................................................................................3-2
3.5 Lithium Battery ...................................................................................................................3-2
3.6 Unpacking and Checking the Delivery Unit........................................................................3-3
4 Basic settings............................................................................................................................. 4-1
4.1 Components.......................................................................................................................4-1
4.1.1 Processor Type................................................................................................... 4-1
4.1.2 Memory Options.................................................................................................. 4-1
4.1.3 M.2 SSD Options ................................................................................................ 4-1
5 Setting Up the Device ................................................................................................................ 5-1
5.1 Ergonomic Terminal Workplace .........................................................................................5-1
6 Overview ..................................................................................................................................... 6-1
6.1 Front View with Stand ........................................................................................................6-1
6.2 Back View with Stand.........................................................................................................6-2
6.3 AC Power Adapter .............................................................................................................6-3
6.4 Front Panel.........................................................................................................................6-4
7 Projected Capacitive Touch Screen......................................................................................... 7-1
7.1 General Information ...........................................................................................................7-1
7.2 Instructions for Using the Touch Screen ............................................................................7-1
7.3 Cleaning Instructions..........................................................................................................7-1
8 Planning the Installation ........................................................................................................... 8-1
8.1 Dimensions ........................................................................................................................8-1
8.2 Desktop version .................................................................................................................8-1
8.2.1 Desktop Stand Standard..................................................................................... 8-1
8.2.2 Wall mount version.............................................................................................. 8-2
8.3 Required operation space ..................................................................................................8-2
8.4 Installation site requirements .............................................................................................8-3
8.4.1 Desktop version .................................................................................................. 8-3
8.4.2 Wall mount version.............................................................................................. 8-3
Copyright © 2020, Diebold Nixdorf
01750342843A
ii

Table of Contents
9 Installation to a stand ................................................................................................................ 9-1
9.1 Installing system to the stand (standard) ...........................................................................9-1
9.1.1 Preparing the stand............................................................................................. 9-1
9.1.2 Preparing the system .......................................................................................... 9-2
9.1.3 Installing system to the stand.............................................................................. 9-2
9.2 Installing system to the stand (with I/O hub) ......................................................................9-4
9.2.1 Preparing the stand............................................................................................. 9-4
9.2.2 Preparing the system .......................................................................................... 9-6
9.2.3 Installing system to the stand.............................................................................. 9-6
9.3 Installing system to the stand (with cable covers) .............................................................9-10
9.3.1 Preparing the stand............................................................................................. 9-10
9.3.2 Preparing the system .......................................................................................... 9-11
9.3.3 Installing system to the stand.............................................................................. 9-11
10 Connector Panel ........................................................................................................................ 10-1
10.1 Connecting cables..............................................................................................................10-2
10.2 Disconnecting cables .........................................................................................................10-3
11 Storage Media ............................................................................................................................ 11-1
11.1 Replacement of Solid State Disk........................................................................................11-1
11.2 Replacement of the RAM ...................................................................................................11-3
12 Installing System to a Wall........................................................................................................ 12-1
12.1 Things you need.................................................................................................................12-1
12.2 Mounting height..................................................................................................................12-2
12.3 Mounting location ...............................................................................................................12-2
12.4 Installation ..........................................................................................................................12-3
12.4.1 Fix wall mount back plate to the wall .................................................................. 12-3
12.4.2 Fix wall mount front plate to the system.............................................................. 12-5
12.4.3 Secure the system to the wall ............................................................................. 12-5
13 Peripherals (optional) ................................................................................................................ 13-1
13.1 Waiter Lock ........................................................................................................................13-1
13.1.1 Installation........................................................................................................... 13-1
13.2 Magnetic Swipe Card Reader (MSR).................................................................................13-6
13.2.1 How to operate.................................................................................................... 13-6
13.2.2 Cleaning instructions........................................................................................... 13-6
13.2.3 Installation........................................................................................................... 13-6
13.3 NFC Module .......................................................................................................................13-9
13.3.1 Installation........................................................................................................... 13-9
14 Starting Up the System ............................................................................................................. 14-1
15 Error Reporting .......................................................................................................................... 15-1
16 POST Code ................................................................................................................................. 16-1
17 Technical Data............................................................................................................................ 17-1
17.1 AC Power Adapter .............................................................................................................17-3
17.2 NFC Module .......................................................................................................................17-4
17.3 I/O Hub...............................................................................................................................17-5
Copyright © 2020, Diebold Nixdorf
01750342843A
iii

Table of Contents
17.3.1 Block Diagram..................................................................................................... 17-7
17.4 Total Available Power ........................................................................................................17-8
18 Appendix..................................................................................................................................... 18-1
18.1 Approved Printers List........................................................................................................18-1
Copyright © 2020, Diebold Nixdorf
01750342843A
iv

1
1 Manufacturer´s Certification
The device complies with the requirements of the EEC directive 2014/30/EU with re-
gard to ‘Electro-magnetic compatibility" and 2014/35/EU “Low Voltage Directive” and
RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
In addition, the BEETLE A1150 has received the cTUVus symbol.
1.1
1.1 FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to cor-
rect the interference at his own expense. Modifications not authorized by the manufacturer may void
users authority to operate this device.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CAN ICES-3 (A)/NMB-3 (A)
1.2
1.2 Energy Efficiency
NOTE
Information on Energy Efficiency will be available in the next revision of the User Manual.
Copyright © 2020, Diebold Nixdorf
01750342843A
1-1

Manufacturer´s Certification
1.3
1.3 Wireless Declaration of Conformity
Hereby, Diebold Nixdorf declares that this device is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EC.
Csěky [Czech]: Diebold Nixdorf tímto prohlašuje, že tento zařízení je ve shodě se zák-
ladními požadavky a dalšími příslušnými ustanoveními směrnice
2014/53/ES.
Dansk [Danish]: Undertegnede Diebold Nixdorf erklærer herved, at følgende udstyr En-
hed overholder de væsentlige krav og øvrige relevante krav i direktiv
2014/53/EF.
Deutsch [German]: Hiermit erklärt Diebold Nixdorf, dass sich das Gerät in Übereinstimmung
mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 2014/53/EG befindet.
Eesti [Estonian]: Käesolevaga kinnitab Diebold Nixdorf seadme vastavust direktiivi
2014/53/EÜ põhinõuetele ja nimetatud dire ktiivist tulenevatele teistele
asjakohastele sätetele.
English: Hereby, Diebold Nixdorf declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EC.
Español [Spanish]: Por medio de la presente declara que el dispositivo cumple con los req-
uisitos esenciales y cualesquiera otras disposiciones aplicables o exigi-
bles de la Directiva 2014/53/CE.
Ελληνική [Greek]: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Diebold Nixdorf ΔΗΛΩΝΕΙ ΟΤΙ συσκευή
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/ΕΚ.
Français [French]: Par la présente Diebold Nixdorf déclare que l'appareil est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la direc-
tive 2014/53/CE.
Italiano [Italian]: Con la presente Diebold Nixdorf dichiara che questo dispositivo è con-
forme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 2014/53/CE.
Latviski [Latvian]: Ar šo Diebold Nixdorf deklarē, ka ierīce atbilst Direktīvas 2014/53/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]: Šiuo Diebold Nixdorf deklaruoja, kad šis prietaisas atitinka esminius
reikalavimus ir kitas 2014/53/EB Direktyvos nuostatas.
Nederlands [Dutch]: Hierbij verklaart Diebold Nixdorf dat het toestel apparaat in overeenstem-
ming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 2014/53/EG.
Malti [Maltese]: Hawnhekk, Diebold Nixdorf jiddikjara li dan apparat jikkonforma mal-ħtiġi-
jiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
2014/53/EC.
Copyright © 2020, Diebold Nixdorf
01750342843A
1-2

Manufacturer´s Certification
Magyar [Hungarian]: Alulírott, Diebold Nixdorf nyilatkozom, hogy a eszköz megfelel a
vonatkozó alapvetõ követelményeknek és az 2014/53/EC irányelv egyéb
elõírásainak.
Polski [Polish]: Niniejszym Diebold Nixdorf oświadcza, że urządzenie jest zgodny z za-
sadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 2014/53/EC.
Português [Portuguese]: Diebold Nixdorf declara que este dispositivo está conforme com os requi-
sitos essenciais e outras disposições da Directiva 2014/53/CE.
Slovensko [Slovenian]: Diebold Nixdorf izjavlja, da je ta Naprava v skladu z bistvenimi zahtevami
in ostalimi relevantnimi določili direktive 2014/53/ES.
Slovensky [Slovak]: Diebold Nixdorf týmto vyhlasuje, že zariadenie spĺňa základné požia-
davky a všetky príslušné ustanovenia Smernice 2014/53/ES.
Suomi [Finnish]: Diebold Nixdorf vakuuttaa täten että laite on direktiivin 2014/53/EY oleel-
listen vaatimusten ja sitä koskevien direktiivin muiden eh tojen mukainen.
Svenska [Swedish]: Härmed intygar Diebold Nixdorf att denna enhet står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser
som framgår av direktiv 2014/53/EG.
Íslenska [Icelandic]: Hér með lýsir Diebold Nixdorf yfir því að tæki er í samræmi við grunnkrö-
fur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EC.
Norsk [Norwegian]: Diebold Nixdorf erklærer herved at utstyret enhet er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EF.
The declaration of conformity may be consulted at http://www.dieboldnixdorf.com.
Copyright © 2020, Diebold Nixdorf
01750342843A
1-3

Manufacturer´s Certification
1.4
1.4 FCC RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the an-
tenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from
all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two con-
ditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation of
the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Inno-
vation, Sciences et Développement économique Canada applicables aux appareils radio exempts de li-
cence. L’exploitation est autorisée aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
1.5
1.5 Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency ex-
posure limits. The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile
exposure conditions.(antennas are greater than 20cm from a person's body).
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortieémise par l’appareil de sans fil est inférieure à la limite d'exposition aux
fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts
humains lors du fonctionnement normal.
Ce périphérique a également étéévalué et démontré conforme aux limites d'exposition aux RF d'IC dans
des conditions d'exposition à des appareils mobiles(antennes sont supérieures à 20 cm à partir du corps
d'une personne).
Copyright © 2020, Diebold Nixdorf
01750342843A
1-4

Manufacturer´s Certification
1.6
1.6 Important Notes
Diebold Nixdorf is not responsible for any radio and television malfunctions which emerge from unautho-
rized changes in the device. Make sure that only cables and devices may be connected which are admit-
ted by Diebold Nixdorf. The user is responsible for any malfunctions that emerge from the actions men-
tioned before.
The device may only be installed, or repaired by authorized qualified personnel. Unautho-
rized opening of the device and inexpertly carried-out repairs may not only seriously jeopar-
dize the safety of the user, but also cancel all warranty and liability agreements.
Expansion cards with electrostatically sensitive devices (ESD) may be marked with this
sticker.
When opening the device or handling modules fitted with ESD, please observe the following instructions,
which pertain to all electrostatic sensitive devices (ESDs):
• Always use the antistatic kit.
• Statically discharge yourself, for example by touching an earthed object (such as a heat radiator) be-
fore beginning to work with ESD-labeled components.
• Likewise, all equipment and tools used in working with such components must be free of static
charge.
• Pull the mains plug before inserting or removing such components.
• Only handle such components by their edges.
• Never touch any terminal pins of the strip conductors on such components.
Copyright © 2020, Diebold Nixdorf
01750342843A
1-5

Manufacturer´s Certification
1.7
1.7 Safety Notes
The BEETLE A1150 conforms to the current safety standards for data processing equipment.
• If this device is taken from a cold environment into the operating room, moisture condensation may
form. The device must be absolutely dry before being put into service; an acclimatization period of at
least two hours must therefore be observed.
• This device is equipped with a safety-tested power cable and may be connected only to a prescribed
grounded-contact power socket.
• When setting up the device, ensure that the power socket on the device and the grounded-contact
power socket are easily accessible.
• Whenever work of any kind is done on the device, as well as when data cables are plugged and/or
unplugged, the device must be completely disconnected from the line voltage. To do so, turn the de-
vice off and unplug the power cord.
• To disconnect the device from the supply voltage completely, switch off the device and disconnect
the power plug of the system.
• Never plug in or unplug data communication lines during thunderstorms.
• Protect devices from vibrations, dust, moisture and heat.
• Always dispose of used parts, such as batteries, in an environmentally safe manner.
• In emergencies (e.g. damaged housing or damaged power cable, penetration by liquids or foreign
bodies), the device must be switched off immediately, the power plug disconnected and the Cus-
tomer Service of Diebold Nixdorf or your dealer must be notified.
• Your BEETLE A1150 system is the result of modern technical innovation. So please see for accord-
ing structural and technical surroundings to guarantee a faultless and efficient work of your
BEETLE A1150. Therefore, you should connect your BEETLE A1150, or other IT-devices only to
power supply systems with separately guided protective earth conductor (PE). This kind of electricity
system is known as TN-S network. Do not use PEN conductors!
• Please also observe the recommendations of the norm DIN VDE 0100, Part 540, Appendix C2 as
well as EN50174-2, §5.4.3.Thus you can help to avoid possible malfunctions.
• If you replace a storage medium, make sure that you only use the storage medium recommended or
approved by Diebold Nixdorf.
• This equipment is not suitable for use in locations where children are likely to be present.
• "CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries
According to the Instructions."/“ATTENTION: Risque d’explosion si la batterie est remplacée par un
type incorrect. Mettre au rebus les batteries usagées selon les instructions.“
Copyright © 2020, Diebold Nixdorf
01750342843A
1-6

2
2 Supplier’s Declaration of Conformity
Product Description: POS Terminal
Model: BEETLE A1150
Party issuing Supplier’s Declaration of Conformity
Diebold Nixdorf Singapore PTE. LTD.
30A Kallang Place
#04-01
Singapore 339213
Phone: [phone]
Responsible Party – U.S. Contact Information
Diebold Nixdorf
5995 Mayfair Road
N. Canton, OH 44720 / USA
Phone: [phone]
FCC Compliance Statement (for products subject to Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Copyright © 2020, Diebold Nixdorf
01750342843A
2-1

3
3 Introduction
The BEETLE A1150 belongs to a new generation of the BEETLE all-in-one family to meet the demands
for slim-look and bezel with narrower borders. It features the new Whiskey Lake U SOC along with other
newer technologies such as USB Type C.
3.1
3.1 About this manual
This documentation is intended to help you to work with the BEETLE A1150 system and to serve as a
reference work. The detailed table of contents will help you find the desired information quickly and eas-
ily.
WARNING
This symbol is used for warnings.
NOTE
Notes in this manual are marked by this symbol.
The type and scope of application programs depend on the customer’s own selection; therefore, soft-
ware will not be discussed further in this manual.
3.2
3.2 Care of the BEETLE A1150
Clean your system’s housing at regular intervals with a dry, lint-free cloth. If this does not suffice please
use a suitable plastic-surface cleaner which you can order from Diebold Nixdorf.
For more information about cleaning read the chapter “Projective Capacitive Touch Screen”. When
cleaning always make sure that the power plug is disconnected and that no liquid finds its way into the
device.
3.3
3.3 Recycling the BEETLE A1150
Environmental protection does not begin when the time has come to dispose of the BEETLE A1150; it
begins with the manufacturer. This product was designed according to our internal norm “Environmental
conscious product design and development”.
The BEETLE A1150 system is manufactured without the use of CFC and CHC and is produced mainly
from reusable components and materials.
Please do not stick labels onto plastic case parts. This would help us to reuse components and material.
But there are still some parts that are not reusable. Diebold Nixdorf guarantees the environmentally safe
disposal of these parts in a Recycling Center, which is certified pursuant to ISO 9001 and ISO 14001.
Copyright © 2020, Diebold Nixdorf
01750342843A
3-1

Introduction
You can protect our environment by only switching on your equipment when it is actually needed. If pos-
sible, even avoid the stand-by-mode as this wastes energy, too. Also switch your equipment off when
you take a longer break or finish your work.
Please contact your competent branch or the Recycling Center Paderborn (for European countries) for
information on how to return and reuse devices and disposable materials under the following mail ad-
dress.
Email: [email protected] or on the internet.
3.4
3.4 Warranty
In general, damages due to
• improper or insufficient maintenance,
• improper use of the product or unauthorized modifications of the product,
• inadequate location or surroundings
will not be covered by the warranty.
For further information on the stipulation consult your contract.
All parts of the product which are subject to wear and tear are not
included in the warranty engagement. For detailed warranty arrangements please consult your contract
documents.
Please order spare parts at the Diebold Nixdorf customer service.
3.5
3.5 Lithium Battery
WARNING
Incorrect replacement of the Lithium Battery may lead to a risk of explosion
The end user must replace the lithium battery only by identical batteries or types recom-
mended by Diebold Nixdorf.
Do not throw Lithium Batteries into the trash can. It must be disposed of in accordance
with local regulations concerning special waste.
Make sure that you insert the Battery the right way round. The plus pole must be on top.
WARNING
Always make sure that the system is switched off and the power cable is disconnected
from the system before you replace the battery.
Copyright © 2020, Diebold Nixdorf
01750342843A
3-2

Introduction
3.6
3.6 Unpacking and Checking the Delivery Unit
Unpack the parts and check to see whether the delivery matches the information on the delivery note.
The delivery comprises the respective screen module. Data cables, necessary for operation, can be or-
dered separately. lf damage has occurred during shipping or if the package contents do not match the
delivery note, immediately inform your Diebold Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against impact and shock).
Copyright © 2020, Diebold Nixdorf
01750342843A
3-3

4
4 Basic settings
The BEETLE A1150 is configured to your order. Add-on peripheral devices, for example the magnetic
swipe card reader (MSR), are delivered together with the system as an assembled unit.
4.1
4.1 Components
The BEETLE A1150 comes with a 15W of the following processor options with configurable memory and
SSD options:
4.1.1
4.1.1 Processor Type
Whiskey Lake 15W Processor Options:
• Celeron 4305UE
• Core i3-8145UE
• Core i5-8365UE
4.1.2
4.1.2 Memory Options
1. DDR4 1866/2133/2400 MT/s SODIMM up to 16GB
4.1.3
4.1.3 M.2 SSD Options
1. 128GB
2. 256GB
3. 512GB
4. 1TB
Copyright © 2020, Diebold Nixdorf
01750342843A
4-1

5
5 Setting Up the Device
The BEETLE A1150 was developed for an in-house installation. The devices are designed to be
mounted on a stand (desktop version), or on the wall (wall mount version).
Set up the BEETLE A1150 system where it will not be exposed to extreme environmental conditions.
Protect the device from vibrations, dust, moisture, heat and strong magnetic fields.
5.1
5.1 Ergonomic Terminal Workplace
Please observe the following when setting up your terminal workplace:
1. Avoid direct glaring and reflective glaring.
Use the screen only in a controlled lumi-
nance surrounding.
2. Install the device with a viewing direction that
is parallel to the windows.
3. Avoid reflective glaring caused by electric
light sources.
4. Position the screen within a preferred and
permitted range of vision, so that you can
look onto the screen from above.
Copyright © 2020, Diebold Nixdorf
01750342843A
5-1

6
6 Overview
6.1
6.1 Front View with Stand
Figure6-1: BEETLE A1150 (front view)
1BEETLE A1150 2Desktop Stand
3Touch buttons and Activities Indicator 4Power status indicator
Copyright © 2020, Diebold Nixdorf
01750342843A
6-1

Overview
6.2
6.2 Back View with Stand
Figure6-2: BEETLE A1150 (back view)
1VESA mount cover 2Hinge
3Side-attach peripheral connection cover
Copyright © 2020, Diebold Nixdorf
01750342843A
6-2

Overview
6.3
6.3 AC Power Adapter
Figure6-3: BEETLE A1150 AC power adapter
1AC Power Cord 2DC Power Out
3Power Indicator
The external power supply is applicable for common line voltage.
It automatically adjusts itself to the particular voltage.
Copyright © 2020, Diebold Nixdorf
01750342843A
6-3

Overview
6.4
6.4 Front Panel
123
Figure6-4: BEETLE A1150 front panel
1- Activity Indicator
• LED Off : No activity
• LED Green Blinking: Activity as config-
ured in CMOS
• LED Amber: POST Code (refer to
Whiskey Lake Motherboard Manual or
BEETLE A1150 User Manual)
• LED Red Blinking: Error detected
2- Brightness buttons
• LED White Off : Off/AC applied
• LED White On : Upon 1st touch and sub-
sequent touch for normal brightness control
3- Power Status Indicator
• LED White Off : Off/AC not applied
• LED White On: Active/Operating
• LED White Dim: Soft-Off
• LED White Blinking: Suspend to RAM/
Standby
3- Power Button
• Single Press : On/Off
Copyright © 2020, Diebold Nixdorf
01750342843A
6-4