DIEBOLD NIXDORF DN Series User manual

DN Series 100D FL
Installation Guide
01750334552E

Table of Contents
1 Introduction ................................................................................................................................ 1-1
1.1 Symbols used in this manual .............................................................................................1-1
1.2 Section-specific warning notes...........................................................................................1-2
2 Safety .......................................................................................................................................... 2-1
2.1 Characters, labels and symbols .........................................................................................2-1
2.2 General safety precautions for the system.........................................................................2-2
2.3 Notes concerning installation .............................................................................................2-5
3 Planning the installation ........................................................................................................... 3-1
3.1 System Dimensions ...........................................................................................................3-1
3.1.1 Frontload UL safe 4H.......................................................................................... 3-1
3.1.2 Frontload UL safe 5H.......................................................................................... 3-2
3.1.3 Frontload CEN safe............................................................................................. 3-3
3.1.4 Overview of installation types ............................................................................. 3-4
3.2 Dimensions of cable lead-ins into the safe.........................................................................3-4
3.2.1 Frontload UL safe ............................................................................................... 3-4
3.2.2 Frontload CEN safe............................................................................................. 3-5
3.3 Installation options of system versions...............................................................................3-6
3.3.1 Perspective view UL safe 4H (free-standing)...................................................... 3-6
3.3.2 Perspective view UL safe 5H (free-standing)...................................................... 3-7
3.3.3 Perspective view CEN safe (free-standing) ........................................................ 3-8
3.3.4 Position of safe ................................................................................................... 3-9
3.4 Ventilation opening.............................................................................................................3-11
3.5 Storage if construction work is not yet complete................................................................3-12
3.6 Space required for operation and maintenance .................................................................3-13
3.6.1 Frontload version with UL safe ........................................................................... 3-13
3.6.2 Frontload version with CEN safe ........................................................................ 3-14
3.7 Floor space requirements ..................................................................................................3-15
3.8 Load-carrying capacity .......................................................................................................3-15
3.9 Notes on floor mounting .....................................................................................................3-15
3.10 Tear-off resistance in compliance with VdS and EN 1143-1 guidelines.............................3-16
3.11 Mounting without installation frames ..................................................................................3-17
3.11.1 General information ............................................................................................ 3-17
3.11.2 Dimensions of the safe attachment points .......................................................... 3-18
3.11.3 Dimensions of cable lead-ins .............................................................................. 3-20
3.12 Tear-off sensor...................................................................................................................3-22
3.13 Drilling diagrams ................................................................................................................3-23
3.13.1 Drilling diagram: Frontload UL safe .................................................................... 3-23
3.13.2 Drilling diagram: Frontload CEN safe ................................................................. 3-24
3.14 Network and data cables....................................................................................................3-25
3.14.1 Power supply....................................................................................................... 3-26
3.15 Remote status indicator .....................................................................................................3-27
3.16 Cable lead-ins into in the safe............................................................................................3-28
3.16.1 Rear cable lead-in - Frontload ............................................................................ 3-28
3.17 Transport route requirements.............................................................................................3-29
Copyright © 2020, Diebold Nixdorf
01750334552E
ii

Table of Contents
3.17.1 Transport dimensions UL safe frontload ............................................................. 3-30
3.17.2 Transport dimensions CEN safe frontload .......................................................... 3-36
4 Installation .................................................................................................................................. 4-1
4.1 Removing the transport packing ........................................................................................4-1
4.2 Disassembly of wooden shipping pallet .............................................................................4-2
4.2.1 Disassembly of metal shipping bracket............................................................... 4-5
4.3 Removal of shipping restraints...........................................................................................4-8
4.3.1 AFD 2.0............................................................................................................... 4-8
4.3.2 TP30/TP31 receipt printer................................................................................... 4-10
4.4 Removal of AFD to install anchor bolts ..............................................................................4-11
4.5 Mounting sets ....................................................................................................................4-13
4.5.1 Mounting sets (optional)...................................................................................... 4-13
4.5.2 Mounting set (for UL safe) .................................................................................. 4-13
4.5.3 Mounting set (for CEN safe)................................................................................ 4-13
4.5.4 Mounting set (expansion anchor set).................................................................. 4-13
4.6 Overview of installation types.............................................................................................4-14
4.7 Mounting the device ...........................................................................................................4-15
4.8 Installation without frame ...................................................................................................4-19
4.9 Putting into service.............................................................................................................4-19
4.10 Access the relay panel for external features (Frontload) ...................................................4-20
4.11 Installing the 'Remote Status Indicator' ..............................................................................4-21
4.11.1 'Remote Status Indicator' - Standard .................................................................. 4-21
4.11.2 'Remote Status Indicator' - Audio........................................................................ 4-26
4.11.3 Shortening cable ends ........................................................................................ 4-31
5 Appendix..................................................................................................................................... 5-1
5.1 Checklist for installation preparations ................................................................................5-1
5.2 Technical data....................................................................................................................5-5
5.2.1 General installation conditions ............................................................................ 5-5
5.2.2 Environmental conditions.................................................................................... 5-7
5.3 Compliance with standards and approvals ........................................................................5-8
5.4 Environmental protection ...................................................................................................5-9
Copyright © 2020, Diebold Nixdorf
01750334552E
iii

Table of Contents
List of Figures
Illustration 3-1 System dimensions – frontload UL safe 4H ...........................................................3-1
Illustration 3-2 System dimensions - frontload UL safe 5H ............................................................3-2
Illustration 3-3 System dimensions — frontload CEN safe ............................................................3-3
Illustration 3-4 Dimensions of cable lead-ins for Frontload UL safe ..............................................3-4
Illustration 3-5 Rear cable lead-in – Frontload CEN safe ..............................................................3-5
Illustration 3-6 Frontload UL safe 4H ............................................................................................3-6
Illustration 3-7 Frontload UL safe 5H ............................................................................................3-7
Illustration 3-8 Frontload CEN safe................................................................................................3-8
Illustration 3-9 Position of UL safe ................................................................................................3-9
Illustration 3-10 Position of CEN safe ..............................................................................................3-10
Illustration 3-11 Ventilation openings ...............................................................................................3-11
Illustration 3-12 Space required for operation and maintenance, frontload system with UL safe....3-13
Illustration 3-13 Space required for operating and maintenance, frontload system with CEN safe.3-14
Illustration 3-14 Dimensions of safe attachment points for Frontload UL safe ................................3-18
Illustration 3-15 Dimensions of safe attachment points for Frontload CEN safe .............................3-19
Illustration 3-16 Dimensions of cable lead-ins for Frontload UL safe...............................................3-20
Illustration 3-17 Dimensions of cable lead-ins for Frontload CEN safe............................................3-21
Illustration 3-18 Drilling template for device with UL safe (frontload)...............................................3-23
Illustration 3-19 Drilling template for (frontload) device with CEN safe............................................3-24
Illustration 3-20 Cable lead-in into the safe from the rear ................................................................3-28
Illustration 3-21 Transport dimensions of the frontload wooden shipping pallet, 4H UL safe ..........3-30
Illustration 3-22 Transport dimensions of the frontload wooden shipping pallet, 5H UL safe ..........3-31
Illustration 3-23 Transport dimensions of the frontload metal shipping bracket, 4H UL safe...........3-32
Illustration 3-24 Transport dimensions of the frontload metal shipping bracket, 5H UL safe...........3-33
Illustration 3-25 Transport dimensions of UL safe frontload ............................................................3-34
Illustration 3-26 Minimum transport dimensions UL safe frontload ..................................................3-35
Illustration 3-27 Transport dimensions of the frontload wooden shipping pallet, CEN safe.............3-36
Illustration 3-28 Transport dimensions of the frontload metal shipping bracket, CEN safe .............3-37
Illustration 3-29 Transport dimensions CEN safe frontload .............................................................3-38
Illustration 3-30 Minimum transport dimensions CEN safe frontload ...............................................3-39
Illustration 4-1 Wooden shipping pallet - Only shift in the directions indicated ..............................4-2
Illustration 4-2 Shipping pallet - Removing screws ........................................................................4-3
Illustration 4-3 Shipping pallet - Removing from the system..........................................................4-4
Illustration 4-4 Metal shipping bracket – Only shift in the directions indicated...............................4-5
Illustration 4-5 Shipping bracket – Removing screws ...................................................................4-6
Illustration 4-6 Shipping bracket - Removing from the system.......................................................4-7
Illustration 4-7 Mounting structure without installation frame .........................................................4-15
Illustration 4-8 Installation with mounting anchors—Marking out bore holes.................................4-16
Illustration 4-9 Installation with mounting anchors—Drilling bore holes ........................................4-16
Illustration 4-10 Installation with mounting anchors—Aligning the system ......................................4-17
Illustration 4-11 Installation with mounting anchors— Securing the system ....................................4-17
Copyright © 2020, Diebold Nixdorf
01750334552E
iv

Table of Contents
Illustration 4-12 Seal the lower edges of the safe ...........................................................................4-18
Illustration 4-13 DN Series 100D FL, free-standing installation .......................................................4-19
Illustration 4-14 Accessing the relay panel for external features (frontload)....................................4-20
Copyright © 2020, Diebold Nixdorf
01750334552E
v

1
1 Introduction
This installation manual provides all of the information you require to plan and prepare installation, and to
set up the DN Series 100D FL.
DN Series 100D FL with AFD 2.0 in the Frontload System with Safe versions:
• UL 291 safe (4 Hi, 5 Hi)
• CEN-I (4 Hi)
The following accessories are available:
Remote Status Indicator (RSI):
• RSI – Standard
• RSI – Audio
1.1
1.1 Symbols used in this manual
-Text following a dash represents an item in a list.
"" Refers to other chapters or sections.
●Text following this symbol describes actions to be performed in the specified order.
‘’ Text in simple inverted commas relates to equipment/mounting parts which are included
in the delivery package.
Text Text in small capitals designate push buttons/switches on a control or switches that are
to be actuated in the software.
1.
2.
n.
Numbered procedural instructions describe activities which must be carried out in the
specified order.
Copyright © 2020, Diebold Nixdorf
01750334552E
1-1

Introduction
1.2
1.2 Section-specific warning notes
DANGER
This warning note describes a hazard with a high degree of risk which, if not avoided, will
result in death or grave bodily injury.
WARNING
This warning note describes a hazard with a medium degree of risk which, if not avoided,
could result in death or grave bodily injury.
CAUTION
This warning note describes a hazard with a low degree of risk which, if not avoided, could
result in slight or minor bodily injury.
NOTE
This note provides application tips and information that help prevent errors and material
damage.
Copyright © 2020, Diebold Nixdorf
01750334552E
1-2

2
2 Safety
2.1
2.1 Characters, labels and symbols
The following labels can be used in these instructions, on the system or on the component.
Warning signs
Mandatory signs
Copyright © 2020, Diebold Nixdorf
01750334552E
2-1

Safety
2.2
2.2 General safety precautions for the system
This device complies with the relevant safety regulations for information processing equipment.
NOTE
Read this guide carefully to ensure that you have thorough knowledge of the system or
component and its operation and maintenance. Operate the system in the right way ac-
cording to these instructions so that injuries and damage are avoided. Keep this guide
available and consult it when you are in doubt of any procedure.
DANGER
Electrical voltage
In case of an emergency (e.g. damaged cabinets, controls or power cables, liquids or for-
eign objects in the device), take the following steps. Deactivate the device immediately by:
• Switching off the automatic circuit-breaker or removing the fuse inset from the fuse
holder in the distribution box of the building installation
• Disconnecting the plug connector of the power supply cable from the grounded socket in
the building installation
• Switching off the ON/OFF switch on the power supply unit
• During a thunderstorm, data transmission lines must not be connected or disconnected
WARNING
Risk of impact
If the control panel is open or the rear door is open, there is a risk of injury to the head.
Move carefully when the control panel or rear door is opened.
Copyright © 2020, Diebold Nixdorf
01750334552E
2-2

Safety
• For reasons of stability, the system must be screwed to the load-bearing substructure of the installa-
tion site or mounted on a suitable base.
• When moving the device from a cold to a warm environment, condensations might occur. Therefore
consider an acclimatization time of at least two hours, before you connect the system to the supply
voltage.
• Only use the original packaging material to transport the system.
• Note the warning and information labels on the system.
• Unless otherwise stated, grasp the components only by the green ledge when handling them.
• The device is equipped with a safety-tested power cable which must be connected to a suitable
grounded socket only.
• Always hold the plug when removing the power cable. Never pull the cable itself.
• Lay all connecting cables in such a way that they will not be stepped on or tripped over, damaged or
crushed in any way.
• Have damaged power cables replaced immediately.
• Make sure that there is always free access to the electrical sockets used or to the electrical circuit-
breakers of the house installation.
DANGER
In case of an emergency (e.g. damaged cabinets, controls or power cables, liquids or for-
eign objects in the system) take the following steps:
Switch the system voltage-free immediately by:
• Switching off the automatic circuit breaker or removing the fuse insert from the fuse
holder in the distributor box of the house installation
• Disconnecting the plug of the power supply cable from the grounded socket in the build-
ing installation
• For further system-specific notes, please refer to the operating manual
• Inform the customer service responsible for you
Copyright © 2020, Diebold Nixdorf
01750334552E
2-3

Safety
• Never connect or disconnect data transmission lines during a thunderstorm.
• Always keep the system's ventilation openings free from obstruction to ensure proper air circulation
and to prevent malfunctions resulting from overheating.
• Only use accessories and extension components that have been approved by us. Non-observance
can result in damage to the system or violations of regulations concerning safety, radio interference
and ergonomical requirements.
• Note that there are only safety extra-low voltage circuits (SELV circuits) if you want to feed voltage
from an external source into prepared cables to install additional electronics (e. g. EMA connection).
• To clean and maintain the system only use cleaning agents approved by Diebold Nixdorf (see
chapter "Cleaning, Service and Maintenance" in the operating manual).
• Components with adjustable light effects are integrated in this product. Repetition frequencies
between 5 Hz and 40 Hz should be avoided as certain light frequencies or flickering light sources can
cause epileptic seizures in some individuals.
Also avoid light reflections and synchronize the cycles wherever possible. Ensure that monitors’ re-
fresh rates are as high as possible.
DANGER
Repairs
Repair work may only be carried out by authorized specialist staff. Unauthorized opening
of the system or repair work carried out improperly could result in considerable danger to
the user. In case of non-compliance, Diebold Nixdorf excludes all liability.
DANGER
Danger of fire and explosion
The handling and the replacement should only be performed by authorized service per-
sonnel who were trained by Diebold Nixdorf.
There is danger of fire or explosion if the batteries are handled improperly. It is therefore
important to note the following points:
• Avoid short circuits
• Never recharge the battery
• Avoid temperatures above +100°C (+212°F)
• Do not try to open the battery by force
• Do not allow the battery to come in contact with water or fire
The battery should only be replaced with the same or an equivalent type recommended by
Diebold Nixdorf.
Dispose of used batteries in compliance with national regulations and the manufacturer’s
specifications.
Copyright © 2020, Diebold Nixdorf
01750334552E
2-4

Safety
2.3
2.3 Notes concerning installation
• When installing the system or doing any work on the system, make sure that it is not connected to
power.
• Before installation, remove the shipping restraints inside the system which secure its components
during transportation if necessary, for the installation (see enclosed information sheet).
Copyright © 2020, Diebold Nixdorf
01750334552E
2-5

3
3 Planning the installation
This chapter provides you with all the information you need to prepare the installation.
3.1
3.1 System Dimensions
NOTE
All dimensions are specified in millimeters. The system views are not drawn to scale.
3.1.1
3.1.1 Frontload UL safe 4H
Illustration3-1: System dimensions – frontload UL safe 4H
Copyright © 2020, Diebold Nixdorf
01750334552E
3-1

Planning the installation
3.1.2
3.1.2 Frontload UL safe 5H
Illustration3-2: System dimensions - frontload UL safe 5H
Copyright © 2020, Diebold Nixdorf
01750334552E
3-2

Planning the installation
3.1.3
3.1.3 Frontload CEN safe
Illustration3-3: System dimensions — frontload CEN safe
Copyright © 2020, Diebold Nixdorf
01750334552E
3-3

Planning the installation
3.1.4
3.1.4 Overview of installation types
Installation options Frontload
Installation without frame
(Free standing installation)
Yes
3.2
3.2 Dimensions of cable lead-ins into the safe
3.2.1
3.2.1 Frontload UL safe
NOTE
The specified cable lead-ins only apply to the system version DN Series 100D FL with UL
safe and with AFD 2.0.
For an overview of the cable lead-ins, see section "Power and data cables".
224
186
78
Illustration3-4: Dimensions of cable lead-ins for Frontload UL safe
Copyright © 2020, Diebold Nixdorf
01750334552E
3-4

Planning the installation
3.2.2
3.2.2 Frontload CEN safe
NOTE
The specified cable lead-ins only apply to the system version DN Series 100D FL with
CEN safe and with AFD 2.0.
For an overview of the cable lead-ins, see section "Power and data cables".
249
211
114
Illustration3-5: Rear cable lead-in – Frontload CEN safe
Copyright © 2020, Diebold Nixdorf
01750334552E
3-5

Planning the installation
3.3
3.3 Installation options of system versions
NOTE
When installing the frontload ATM device, always contact your insurance company before-
hand.
In case of doubt, contact your Diebold Nixdorf consultant for advice.
NOTE
Observe the necessary operation and maintenance space for the various types of installa-
tion (see section "Space required for operation and maintenance").
3.3.1
3.3.1 Perspective view UL safe 4H (free-standing)
TEST LF PE ERROR POWER
USB POWER
Illustration3-6: Frontload UL safe 4H
Copyright © 2020, Diebold Nixdorf
01750334552E
3-6

Planning the installation
3.3.2
3.3.2 Perspective view UL safe 5H (free-standing)
TEST LF PE ERROR POWER
USB POWER
Illustration3-7: Frontload UL safe 5H
Copyright © 2020, Diebold Nixdorf
01750334552E
3-7

Planning the installation
3.3.3
3.3.3 Perspective view CEN safe (free-standing)
TEST LF PE ERROR POWER
USB POWER
Illustration3-8: Frontload CEN safe
Copyright © 2020, Diebold Nixdorf
01750334552E
3-8