Digital Projection E-Vision Laser 15000 Series User manual

Rev B April2021
E-Vision Laser 15000 Series
IMPORTANT INFORMATION
120-999B

DigitalProjection E-Vision Laser15000 Series
Rev B April2021
page 2
Important Information
This page is intentionally left blank

ContactInformation DigitalProjection E-Vision Laser15000 Series
Contact Information
China
Digital Projection China
中国 北京市 朝阳区 芍药居北
里101号 世奥国际中心A座2301
室(100029)
Rm A2301, ShaoYaoJu 101 North
Lane, Shi Ao International Center,
Chaoyang District, Beijing 100029,
PR CHINA
Tel: [phone]
Fax: [phone]
[e-mail]
www.dp-china.com.cn
North America
Digital Projection Inc.
55 Chastain Road, Suite 115,
Kennesaw, GA 30144, USA
Tel: [phone]
Fax: [phone]
[e-mail]
www.digitalprojection.com
Europe
Digital Projection Limited
Greenside Way, Middleton,
Manchester, M24 1XX, UK
Registered in England No.
2207264
Registered Office: As Above
Tel: [phone]
Fax: [phone]
[e-mail]
[e-mail]
www.digitalprojection.co.uk
Taiwan
Digital Projection Taiwan
186 Ruey Kuang Rd, Neihu
District, Taipei, 114 Taiwan
Tel: [phone] x8854
[e-mail]
Japan
Digital Projection Japan
〒105-0012 東京都港区芝大門
2-1-14
2-1-14 Shibadaimon, Minato-ku,
Tokyo, Japan 105-0012
[e-mail]
www.digitalprojection.com/jp
Dubai
Digital Projection FZE
Unit B4, Light Industrial Units 4,
Silicon Oasis, Dubai, UAE
Tel: [phone]
[e-mail]
www.digitalprojection.com
India
Digital Projection India
Plot-43, Sector-35, HSIIDC,
Gurgaon Haryana -122001
Tel: [phone]#4275
[e-mail]
Korea
Digital Projection Korea
1511, Byucksan Digital Valley 6-
cha, Gasan-dong, Geumcheon-
gu, Seoul, Korea
Tel: [phone] #1417
[e-mail]
Important Information Rev B April2021
page 3

DigitalProjection E-Vision Laser15000 Series Contents
Contents
Contact Information 3
Contents 4
Symbols used in this document 6
Additional Documentation 6
Legal notice 6
Third Party Credits 6
What's in the box? 7
Electrical and Physical Specifications 8
General Precautions 9
Laser Safety Precautions 11
Laser Parameters 12
Compliance with International Standards 13
RF Interference 13
Noise 13
European Waste Electrical and Electronic Equipment (WEEE) Directive 13
Product Labels 14
Projector 14
Label Locations 15
Projector 15
Location of Laser Aperture 16
Interlock Switches 17
Installation Precautions 18
Risk Group 3 Laser Hazard Installation Precautions 22
Light Hazard Warning 22
Light Hazard Distance and Hazard Zone 22
Fitting a lens 23
Inserting a new lens 23
Removing the lens 24
Fitting a lens hood 25
Positioning the screen and projector 26
AC Power Precautions 27
Connecting the power supply 27
Rev B April2021
page 4
Important Information

Contents DigitalProjection E-Vision Laser15000 Series
Voltage selection 28
Operation and Configuration Precautions 29
Basic Operating Instructions 30
Switching the projector on 30
Switching the projector off 30
Interlock reset 30
Selecting an input signal 30
Selecting a test pattern 31
Adjusting the lens 31
OSD Lens menu 31
Adjusting the image 32
Orientation 32
Geometry 32
Picture 32
Control panel 33
Projector indicators 34
Remote control 35
Important Information Rev B April2021
page 5

DigitalProjection E-Vision Laser15000 Series Contents
Symbols used in this document
Some information in this document may be accompanied by the following symbols:
LASER WARNING: this symbol indicates that there is a potential hazard of eye
exposure to laser radiation unless the instructions are closely followed.
LIGHT HAZARD WARNING: this symbol indicates that there is a danger of exposure
to intensive light that may result in personal injury unless the instructions are
closely followed.
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical
shock unless the instructions are closely followed.
WARNING: this symbol indicates that there is a danger of physical injury to yourself
and/or damage to the equipment unless the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should
read.
Additional Documentation
Full information about operating, connecting and setting up the projector can be found in the
User Guides.
Please use the QR code (also located on the projector) to access the latest E-
Vision projector user guides and other documentation via the Digital Projection
website.
Or visit the products specification page on the Digital Projection website to
download the latest user guide and other documentation.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their
respective owners. Digital Projection disclaims any proprietary interest in trademarks and trade
names other than its own.
Copyright © 2021 Digital Projection All rights reserved.
Third Party Credits
Art-NetTM Designed by and Copyright Artistic License Holdings Ltd.
Rev B April2021
page 6
Important Information

What's in the box? DigitalProjection E-Vision Laser15000 Series
What's in the box?
Projector
Pic Mute
OPEN CLOSE
MENU
EXIT INFO
HDMI1
OK
OFF ON
ALT
LENS
FOCUS ZOOM
IN
OUT
IN
OUT
SHIFT
21 3
HDMI2 DVI
DISPLAYPORT
HD-T 3GSDI
VGA COMP1 COMP2
BRI
TEST
CON GAMMA
R G B ALL
3D EYE PIP SWAP
456
7 8 9 0
ALT
ADDR
OSD
OFF ON
DEFAULT
FREEZE RE-SYNC
A B C D
USER PRESET
Remote Control Batteries (2xAAA)
Important Information Book Security Screw
Power Cable, UK Power Cable, Europe Power Cable, China
NEMA 5-15P - C19 Power
Cable, North America
NEMA L6-20P - C19 Power
Cable, North America Remote Control Cable
HDMI Cable
Important Information Rev B April2021
page 7

DigitalProjection E-Vision Laser15000 Series Electricaland Physical Specifications
Electrical and Physical Specifications
Mains Voltage 200-240 VAC 8.2A 50/60Hz
100-130 VAC 11.9A 50/60Hz
Operating Temperature 0°C to 35°C (32°F to 95°F), 35°C to 40°C (95°F to 104°F) with
reduced light output
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Operating Humidity 10% to 90% non-condensing
Storage Humidity 10% to 90% non-condensing
Dimensions L:598.3mm (23.55in) X W: 500mm (19.68in) X H 218.5mm (8.6in)
Weight 29.5 kg (65 lb) without lens
Power Consumption at 110 VAC: 1025 W (Normal mode)
at 110 VAC: 990 W (Eco mode)
at 110 VAC: 1070 W (High Altitude mode)
at 240 VAC: 1570 W (Normal mode)
at 240 VAC: 1165 W (Eco mode)
at 240 VAC: 1590 W (High Altitude mode)
Standby Power < 0.5W (Network Off), < 6W (Network On)
Thermal Dissipation at 110 VAC: 3497 BTU/hr (Normal mode)
at 110 VAC: 3378 BTU/hr (Eco mode)
at 110 VAC: 3650 BTU/hr (High Altitude mode)
at 240 VAC: 5357 BTU/hr (Normal mode)
at 240 VAC: 3975 BTU/hr (Eco mode)
at 240 VAC: 5425 BTU/hr (High Altitude mode)
Fan Noise 48 dBA Max, 46 dBA Typical (Normal mode)
45 dBA Max, 43 dBA Typical (Eco mode)
59 dBA Max, 57 dBA Typical (High Altitude mode)
48 dBA Max, 46 dBA Typical (High Altitude Quiet mode)
Specifications are subject to change without notice.
Rev B April2021
page 8
Important Information

GeneralPrecautions DigitalProjection E-Vision Laser15000 Series
General Precautions
Warning! Death or Serious Injury could occur if the following precautions are
ignored
Eye Hazard! Do not look directly into the lens when the light source is on. The high
brightness can cause permanent eye damage
Fire Hazard! Keep any combustible material away from hot surfaces and the
projected beam. Ensure cables do not contact hot surfaces
Shock Hazard! Use only authorised components, tools, accessories and
replacement parts specified by the manufacturer
Trip Hazard! Locate cables where they cannot be pulled, tripped over or damaged
by persons or objects
Operate the product in the specified operating environment and conditions
Product should be powered off and disconnected from the mains before any service
or maintenance operation
Keep body parts, hair, clothing and jewellery away from moving parts in the product.
Do not operate the product without a lens installed
Use a lens plug when installing or moving the product
The unit is never to be operated if the unit is defective or the cover or seal is
damaged.
No maintenance allowed by end user.
Do not open the cabinet. There are no user serviceable parts inside.
No service is allowed except by authorized personnel.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this equipment MUST
be earthed.
Important Information Rev B April2021
page 9

DigitalProjection E-Vision Laser15000 Series GeneralPrecautions
Take care to prevent small objects such as paper or wire from falling into the
projector. If this does happen, switch off immediately, and have the objects
removed by authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids on top
of the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged
power cable.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover or obstruct the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could cause a fire.
Always allow the projector to cool for 5 minutes before disconnecting the power or
moving the projector.
Never use strong detergents or solvents such as alcohol or thinners to clean the
projector and lens.
Rev B April2021
page 10
Important Information