Digital Projection HIGHlite Cine 260 HB User manual

Rev D July 2014
HIGHlite Cine 260 HB, HC
HIGHlite 1080p 330
High Brightness Digital Video Projector
16:9 widescreen display
User Manual
111-367D

Digital Projection HIGHlite Cine 260, 1080p 330 User Manual

Rev D July 2014 Page iii
Please read this user manual carefully before using the projector, and keep
the manual handy for future reference.
A serial number is located on the back of the projector. Record it here:
Symbols used in this guide
Warnings
ELECTRICAL WARNING: this symbol indicates that there is a danger of
electrical shock unless the instructions are closely followed.
WARNING: this symbol indicates that there is a danger of physical
injury to yourself and/or damage to the equipment unless the
instructions are closely followed.
NOTE: this symbol indicates that there is some important information that
you should read.
Trademarks
• IBM is a registered trademark of International Business Machines Corporation.
• Macintosh and PowerBook are registered trademarks of Apple Computer, Inc.
• Other product and company names mentioned in this user’s manual may be the
trademarks of their respective holders.
Product revision
• Because we at Digital Projection continually strive to improve our products, we
may change specications and designs, and add new features without prior
notice. Projectors built prior to this revision of the User Manual may therefore not
include all the features described.
Manual revision
Date Description Revision
December 2010 Rev A
July 2011 addition of 1080p 330 Rev B
July 2012 brightness info corrected in spec
Declaration of Conformity removed
Rev C
July 2014 Product CD part number replaced. Rev D
Important Information

Page iv Rev D July 2014
Important Information Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
General precautions
Do not open the cabinet. There are no user serviceable parts inside.
Use only the power cable provided.
Ensure that the power outlet includes a Ground connection, as this
equipment MUST be earthed.
Take care to prevent small objects such as paper or wire from falling
into the projector. If this does happen, switch off immediately, and have
the objects removed by authorised service personnel.
Do not expose the projector to rain or moisture, and do not place any
liquids on top of the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a
damaged power cable.
There are no user-serviceable parts inside the lamp module. The whole
module should be replaced.
Only lamps supplied by Digital Projection and intended for this
projector should be used. Fitting any other lamp could damage both
projector and lamp, and will invalidate the warranty.
Take care when removing the lamp module.
 NEVERtouchthelamporreector.
Take care not to touch the glass surface of the lamp module. If you
do accidentally touch the glass, it should be cleaned before use. (see
section 5. Maintenance.)
Do not use the lamp for more than 2000 hours, as this may cause
serious lamp failure, damage the lamp module and cause extra cost on
replacement.
HID lamps produce high intensity light. Do not look directly at the light
coming from the lamp housing, or the lens, or allow items such as
magnifying lenses to be placed in the light path. This could result in
serious eye damage.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover or obstruct the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could
causeare
Always allow the projector to cool for 5 minutes before disconnecting
the power, moving the projector, changing the lamp or cleaning the
fansorlter.
Never use strong detergents or solvents such as alcohol or thinners to
clean the projector and lens.
Notes

Rev D July 2014 Page v
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual Important Information
Installation precautions
Theprojectormustbeinstalledonlybysuitablyqualiedpersonnel,in
accordance with local building codes.
The projector should be installed as close to the power outlet as
possible.
The power connection should be easily accessible, so that it can be
disconnected in an emergency.
Ensure that there is at least 30cm (12in) of space between the
ventilation outlets and any wall, and 10cm (4in) on all other sides.
Do not install the projector close to anything that might be affected by
its operational heat, for instance, polystyrene ceiling tiles, curtains etc.
The projector weighs approximately 20 kg (44 lbs). Use safe handling
techniques when lifting the projector.
Do not stack more than three projectors.
When stacking projectors, the stack MUST be vertical, to ensure that
the stresses are distributed to all four chassis corners.
Before installation, make sure that the surface, ceiling or rigging that is
to support the projector is capable of supporting the combined weight
of all the projectors.
Backup safety chains or wires should always be used with ceiling
mount installations.
Do not place heavy objects on top of the projector chassis. Only the
chassis corners are capable of withstanding the weight of another
projector.
Do not drop or knock the projector.
Place the projector in a dry area away from sources of dust, moisture,
steam, smoke, sunlight or heat.
Do not tilt the projector more than ±8.5° forwards and backwards
when in use, as this may cause serious lamp failure, damage the lamp
module and cause extra cost on replacement. The projector my be
tilted left and right as necessary.
Operationandcongurationprecautions
Software update should NOT be carried out except by, or with the
supervision of, Digital Projection Service personnel.
Notes
±8.5°
±8.5°

Page vi Rev D July 2014
Important Information Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
Notes
Compliance with international standards
Noise
GSGV Acoustic Noise Information Ordinance
The sound pressure level is less than 35 dB (A) according to ISO 3744 or ISO 7779.
RF Interference
FCC
The Federal Communications Commission does not allow any modications or
changes to the unit EXCEPT those specied by Digital Projection in this manual.
Failure to comply with this government regulation could void your right to operate
this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant with Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
European Waste Electrical and Electronic Equipment
(WEEE) Directive
Digital Projection Ltd is fully committed to minimising Waste Electrical and
Electronic Equipment. Our products are designed with reuse, recycling
and recovery of all components in mind. To this end, at end of life, your
projector may be returned to Digital Projection Ltd or its agent so that the
environmental impact can be minimised.

Rev D July 2014 Page vii
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual Important Information
Digital Projection Contact details
Digital Projection Limited,
Greenside Way, Middleton, Manchester M24 1XX, UK.
Registered in England No. 2207264, Registered Ofce: as above
Tel [phone]
Fax [phone]
Email [email protected], [email protected]
Web Site www.digitalprojection.co.uk
Digital Projection Inc.
55 Chastain Road, Suite 115, Kennesaw, GA 30144. USA
Tel (USA) 770 420 1350
Fax (USA) 770 420 1360
Email [email protected]
Web Site www.digitalprojection.com
Notes

Page viii Rev D July 2014
Important Information Digital Projection HIGHlite Cine 260, 1080p 330 User Manual

Rev D July 2014 Page ix
continued
HIGHlite Series
User Manual
Contents
Important Information
Symbols used in this guide................................................................................................................. iii
Warnings............................................................................................................................................. iii
Trademarks ......................................................................................................................................... iii
Product revision..................................................................................................................................... iii
Manual revision...................................................................................................................................... iii
General precautions..............................................................................................................................iv
Installation precautions ........................................................................................................................v
Operationandcongurationprecautions ........................................................................................v
Compliance with international standards........................................................................................vi
Noise..................................................................................................................................................vi
RF Interference....................................................................................................................................vi
European Waste Electrical and Electronic Equipment (WEEE) Directive ...................................................vi
Digital Projection Contact details ..................................................................................................... vii
1. Introduction
What’s in the box?.............................................................................................................................. 1.2
Key features of the projector ........................................................................................................... 1.3
Getting to know the projector.......................................................................................................... 1.4
Front view ........................................................................................................................................ 1.4
Rear view......................................................................................................................................... 1.4
2. Installation
Screen requirements ......................................................................................................................... 2.2
Aspect ratio ...................................................................................................................................... 2.2
Positioning the screen and projector ................................................................................................... 2.6
Screen size vs throw distance ............................................................................................................ 2.7
Choosing a lens .................................................................................................................................. 2.8
Choosing a lens using the lens charts................................................................................................. 2.9
Choosing a lens by calculation ..........................................................................................................2.11
Fitting the lens................................................................................................................................... 2.12
Shifting the image............................................................................................................................. 2.14
Mounting the projector.................................................................................................................... 2.15
Ceiling mounting............................................................................................................................. 2.15
Level adjustment............................................................................................................................. 2.15

Page x Rev D July 2014
Table of Contents Digital Projection HIGHlite Cine 260, 1080p 330 User Manual
continued
Rear projection ............................................................................................................................... 2.16
Stacking projectors.......................................................................................................................... 2.16
Connecting the projector................................................................................................................ 2.17
Signal Inputs .................................................................................................................................. 2.17
Control connections ........................................................................................................................ 2.19
Power connection ........................................................................................................................... 2.20
3. Getting Started
Positioning the screen and projector ............................................................................................ 3.2
Switching the projector on ............................................................................................................... 3.2
Inserting batteries into the remote control................................................................................... 3.2
Selecting an input signal or test pattern....................................................................................... 3.3
Input ................................................................................................................................................ 3.3
Test pattern ...................................................................................................................................... 3.3
Adjusting the lens............................................................................................................................... 3.3
Adjusting the projected image ........................................................................................................ 3.4
Aspect ratio ...................................................................................................................................... 3.4
Image quality settings........................................................................................................................ 3.4
Switching the projector off............................................................................................................... 3.4
4. Controlling the projector
Overview ............................................................................................................................................... 4.3
Controlling the projector..................................................................................................................... 4.3
The control panel................................................................................................................................ 4.4
LED status indicators ........................................................................................................................ 4.4
The remote control............................................................................................................................. 4.5
Layout ............................................................................................................................................. 4.5
Timeout............................................................................................................................................ 4.5
Using the control keys ...................................................................................................................... 4.6
Power .............................................................................................................................................. 4.6
Source............................................................................................................................................. 4.6
Aspect ratio ...................................................................................................................................... 4.6
User memory.................................................................................................................................... 4.6
Image quality settings........................................................................................................................ 4.7
Test pattern ...................................................................................................................................... 4.7
Lens ................................................................................................................................................ 4.7
Using the menus................................................................................................................................. 4.8
Navigating menus and submenus....................................................................................................... 4.8
Main menu ............................................................................................................................................ 4.9
Aspect Ratio..................................................................................................................................... 4.9
Presets .......................................................................................................................................... 4.10