Digital Projection E-Vision 6000 Series User manual

Rev D July 2014
USER MANUAL
INSTALLATION AND QUICK-START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REMOTE COMMUNICATIONS GUIDE
113-375D
E-Vision 6000 Series
High Brightness Digital Video Projector
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO

Digital Projection E-Vision 6000 Series
Rev D July 2014
About This Document
Please follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely
followed.
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless
the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners.
Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.
Copyright © 2014 Digital Projection Ltd. All rights reserved.
Notes

Digital Projection E-Vision 6000 Series
ii
Rev D July 2014
Introduction
Congratulations on your purchase of this Digital Projection product.
Your projector has the following key features:
• Swappable color wheels for high brightness and color critical applications.
• BrilliantColor™ for increased system brightness.
• DynamicBlack™ for improved black levels in dark scenes.
• Vertical and horizontal keystone correction.
• Control via LAN and RS232.
• Motorized lens mount.
A serial number is located on the back of the projector. Please record it here:
Notes

Digital Projection E-Vision 6000 Series
iii
Rev D July 2014
CONTENTS
INSTALLATION AND QUICK-START GUIDE..............................1
WHAT’S IN THE BOX? ................................................................... 3
GETTING TO KNOW THE PROJECTOR.......................................... 4
Front, side and rear views..................................................................... 4
Remote control...................................................................................... 4
Control panel and remote control.......................................................... 5
Control panel indicators ........................................................................ 6
The Power indicator ............................................................................... 6
The Warning indicator............................................................................. 6
The Lamp indicators ............................................................................... 7
CHANGING THE LENS, LAMPS AND COLOR WHEEL.................... 8
Removing the lens ................................................................................ 8
Fitting the lens....................................................................................... 8
Changing the lamp................................................................................ 9
Changing the color wheel.................................................................... 10
POSITIONING THE SCREEN AND PROJECTOR........................... 11
OPERATING THE PROJECTOR.................................................... 12
Switching the projector on................................................................... 12
Selecting an input signal ..................................................................... 12
Adjusting the lens................................................................................ 13
Zoom................................................................................................ 13
Focus ............................................................................................... 13
Shift ................................................................................................. 13
Adjusting the image............................................................................. 14
Orientation ......................................................................................... 14
Aspect Ratio....................................................................................... 14
Picture .............................................................................................. 14
Switching the projector off................................................................... 14
CONNECTION GUIDE ............................................................................15
SIGNAL INPUTS AND OUTPUTS.................................................. 17
Computer 1 ......................................................................................... 17
Computer 2 ......................................................................................... 17
Computer 3 ......................................................................................... 17
Component.......................................................................................... 17
Video or S-Video ................................................................................. 17
Monitor Out ......................................................................................... 17
SUPPORTED SIGNAL INPUT MODES .......................................... 18
CONTROL CONNECTIONS........................................................... 20
Screen Trigger..................................................................................... 20
USB..................................................................................................... 20
Serial Port ........................................................................................... 20
LAN ( ) ........................................................................................... 20
WIRING DETAILS......................................................................... 21
Signal inputs and outputs.................................................................... 21
Computer 1 ........................................................................................ 21
Computer 2 ........................................................................................ 22
Computer 3 ........................................................................................ 23
Component ........................................................................................ 24
Video and S-Video ............................................................................... 25
Monitor Out ........................................................................................ 26

Digital Projection E-Vision 6000 Series
iv
Rev D July 2014
Control connections ............................................................................ 27
Screen Trigger output ........................................................................... 27
Serial Port.......................................................................................... 27
LAN connection ( ) ......................................................................... 27
OPERATING GUIDE ................................................................................29
USING THE REMOTE CONTROL.................................................. 31
USING THE MENUS ..................................................................... 32
Opening the menus............................................................................. 32
Inside a menu...................................................................................... 32
Navigating the menus ......................................................................... 33
Accessing sub-menus......................................................................... 33
Editing settings.................................................................................... 33
Changing slider values........................................................................ 34
Executing commands.......................................................................... 34
Editing numeric elds.......................................................................... 34
A TOUR OF THE MENUS.............................................................. 35
Main menu .......................................................................................... 35
Input menu .......................................................................................... 35
Adjust menu ........................................................................................ 36
Image ............................................................................................... 36
Image Options .................................................................................... 39
Video................................................................................................ 40
Volume control .................................................................................... 41
Setting menu....................................................................................... 41
Basic tab ........................................................................................... 41
Installation tab .................................................................................... 42
Installation tab - continued ..................................................................... 43
Option tab.......................................................................................... 45
Information menu ................................................................................ 46
Usage time tab.................................................................................... 46
Input tab............................................................................................ 46
Network tab........................................................................................ 46
Version tab......................................................................................... 46
Reset menu......................................................................................... 46
MENU MAP .................................................................................. 47
REMOTE COMMUNICATIONS GUIDE ..........................................51
INTRODUCTION........................................................................... 53
SERIAL PORT CONTROL COMMANDS ........................................ 54
Header code....................................................................................... 54
Examples .......................................................................................... 54
The commands ................................................................................... 55
Set Commands ................................................................................... 55
Get Commands................................................................................... 56
Remote Commands ............................................................................. 57
LAN CONTROL UTILITY............................................................... 58
Power ON/OFF ................................................................................... 58
Picture and Volume controls ................................................................... 58
Source Select ..................................................................................... 58
Mute................................................................................................. 58
Projector Status................................................................................... 58
LAN CONFIGURATION................................................................. 59
Settings ............................................................................................... 59
Host Name......................................................................................... 59
Domain Name..................................................................................... 59
Mail.................................................................................................. 59
PJLink .............................................................................................. 60

Rev D July 2014
E-Vision 6000 Series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO

Digital Projection E-Vision 6000 Series IN THIS GUIDE Installation and Quick-Start Guide
Rev D July 2014
IN THIS GUIDE
What’s In The Box?............................................................................................. 3
Getting To Know The Projector...................................................................... 4
Front, side and rear views..........................................................................................4
Remote control............................................................................................................4
Control panel and remote control .............................................................................5
Control panel indicators.............................................................................................6
The Power indicator .......................................................................................................... 6
The Warning indicator....................................................................................................... 6
The Lamp indicators ......................................................................................................... 7
Changing The Lens, Lamps And Color Wheel............................................ 8
Removing the lens ......................................................................................................8
Fitting the lens.............................................................................................................8
Changing the lamp......................................................................................................9
Changing the color wheel ........................................................................................10
Positioning The Screen And Projector....................................................... 11
Operating The Projector ................................................................................. 12
Switching the projector on.......................................................................................12
Selecting an input signal..........................................................................................12
Adjusting the lens .....................................................................................................13
Zoom...............................................................................................................................13
Focus ..............................................................................................................................13
Shift.................................................................................................................................13
Adjusting the image..................................................................................................14
Orientation ......................................................................................................................14
Aspect Ratio....................................................................................................................14
Picture.............................................................................................................................14
Switching the projector off.......................................................................................14

Digital Projection E-Vision 6000 Series WHAT’S IN THE BOX? Installation and Quick-Start Guide
3
Rev D July 2014
Notes
Make sure your box contains
everything listed. If any pieces are
missing, contact your dealer.
You should save the original box
and packing materials, in case you
ever need to ship your projector.
The projector is shipped without a
lens.
A four-segment color wheel,
optimized for brightness, is tted as
standard. Use the six-segment color
wheel for optimized color.
The power cable supplied will
be appropriate to the shipping
destination.
2 x AAA batteries
User Manual on disc (115-759)
Important Information
(113-380)
Projector
Power cable
LENSSHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO
Remote control
(110-385)
Lens cap Six-segment color wheel
VGA cable
What’s In The Box?

Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
4
Rev D July 2014
LENSSHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO
Getting To Know The Projector
Front, side and rear views
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
The upper wheel and the PAGE
UP / PAGE DOWN buttons do
not perform any function on this
projector.
The remote will function well within
a radius of about 7 meters (23 feet)
and 15 degrees above or below the
projector level.
Lens
Connection
panel
Mains
input
Control
panel
Adjustable
foot
Front
infra-red
window
Rear
infra-red
window
Air
inlet
Air
inlet
Air
outlet
Lamp and color
wheel cover
Air lter
cover
Air lter
cover Loudspeaker
Loudspeaker
Remote control
Infra-red
reception
40°
40°
Remote control
Lens
release
lever

Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
5
Rev D July 2014
Control panel and remote control
Some of the controls from the remote control are duplicated on the projector
control panel, as shown on the right.
The following buttons are identical:
• POWER on the remote control and on the control panel.
• on the remote control and ENTER on the control panel.
• SOURCE and AUTO on both devices.
• VOLUME + / VOLUME - on the remote control and the LEFT and
RIGHT arrow buttons on the control panel.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Remote control Control panel

Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
6
Rev D July 2014
Control panel indicators
The Power indicator
The Power indicator will show amber when in standby and green when the projector is on, and will ash when the projector is warming up or
cooling down.
Condition Power indicator behaviour
Power off Off
Standby On (amber)
Cooling Flashing (amber)
Warming up Flashing (green)
Power on (Normal) On (green)
The Warning indicator
The Warning indicator will switch on or ash in different patterns to show different error situations.
Condition Warning indicator behaviour
Projector working normally Off
Cover error Flash and pause (red) pause
Temperature error Two ashes and pause (red) pause
Power error Three ashes and pause (red) pause
Fan error Four ashes and pause (red) pause
Key locked On (amber)
Standby, Power-saving Off
Standby, Normal On (green)
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO
Notes

Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
7
Rev D July 2014
Notes
The Lamp indicators
The Lamp indicators will show which lamp is in use, and whether it is in Normal or Eco mode.
Condition Lamp indicators behaviour
Lamp off Off
End of lamp life Flashing (red)
No lamp Flash and pause (red) pause
Lamp error Six ashes and pause (red) pause
Cooling lamp Flashing (amber)
Re-light up sequence Flashing (green)
Lamp life over On (red)
Eco mode On (amber)
Normal mode On (green)

Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
8
Rev D July 2014
Changing The Lens, Lamps And Color Wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, and gently insert it all the way into the lens mount.
2. Turn the lens clockwise until it clicks into place.
Notes
1
2
3
12

Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
9
Rev D July 2014
Changing the lamp
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3. Pull rmly upwards on the handle to remove the lamp module.
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
Notes
The lamp and color wheel must be
changed only by suitably qualied
personnel.
12 3
456

Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
10
Rev D July 2014
Changing the color wheel
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
Notes
A four-segment color wheel,
optimized for brightness, is tted as
standard. Use the six-segment color
wheel for optimized color.
Keep the unused color wheel in the
zipper bag in which the six-segment
color wheel was packaged. The
bag prevents dust from falling or
collecting on the color wheel.
The lamp and color wheel must be
changed only by suitably qualied
personnel.
3
2
1
4 5 6

Digital Projection E-Vision 6000 Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
11
Rev D July 2014
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to ll the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
Alternatively, ve M4 bolts (max length 12 mm [0.5 in]) can be used to attach the projector to a ceiling mount (optional accessory,).
Notes
Ensure that there is at least 50
cm (20 in) of space between the
ventilation outlets and any wall,
and 10 cm (4 in) on all other
sides.
If ceiling mounting, ensure there
is 30 cm (12 in) of space between
the projector and ceiling.
Do not stack the projectors.
Do not tilt the projector more than
±10° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
±10° ±360°
For details on setting up image and
screen options, see Operating the
Projector later in this Guide.
1
2
3
4 5
Location of the ceiling mount holes at the bottom of the projector

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
12
Rev D July 2014
Operating The Projector
Switching the projector on
1. Connect the power cable between the mains supply and the projector. Switch on at the switch next to the power connector.
The Power indicator on the projector control panel will show amber and the Warning indicator will show green. The lamp will be off and
the projector will be in STANDBY mode.
2. Press the POWER button on the control panel or on the remote control. The Power indicator on the control panel will ash green for a few
seconds whilst the lamp comes up to full brightness. When the projector is ready for use, the Power indicator will show steady green.
3. Select the default language.
Selecting an input signal
Connect an input source to the projector. The signal should be automatically detected by the projector, and should be displayed within two or
three seconds.
If more than one signal is connected, then select the input you want to display:
1. On either the control panel or remote, press MENU.
2. From the list of available menus, select INPUT.
3. Use the UP and DOWN arrow buttons to navigate, then ENTER to select the input you wish to display. Press MENU to exit.
Notes
The language selection screen only
appears the rst time you power on
the projector. For information about
changing the default language at
a later stage, see the Operating
Guide.
For full details of how to connect an
input source to the projector, see the
Connection Guide.
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
13
Rev D July 2014
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel to adjust the lens so that the image lls the screen.
• Or on the remote control:
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the BASIC tab, select ZOOM, then use the LEFT and RIGHT arrow buttons to adjust the lens.
Focus
• Use the FOCUS +/− buttons on the control panel to adjust the lens until the image is sharp.
• Or on the remote control:
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the BASIC tab, select FOCUS, then use the LEFT and RIGHT arrow buttons to adjust the focus.
Shift
• Use the LENS SHIFT buttons LEFT , RIGHT , UP and DOWN on the control panel to adjust the position of the image,
• Or using the remote control:
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the BASIC tab, select LENS SHIFT, then use the arrow buttons LEFT , RIGHT , UP and DOWN to adjust the
position of the image.
Notes

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
14
Rev D July 2014
Adjusting the image
Orientation
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the INSTALLATION tab, open the CEILING & REAR setting, then select the desired image orientation. (Choose from Desktop Front,
Ceiling Rear, Desktop Rear and Ceiling Front.)
Aspect Ratio
1. Press MENU and from the list of options that appears on the screen, select ADJUST.
2. On the IMAGE OPTIONS tab, open the SCREEN setting, then select the desired screen aspect ratio. (Choose from 4:3, 16:9, 16:10,
Letterbox, True and Normal.)
Picture
1. Press MENU and from the list of options that appears on the screen, select ADJUST.
2. On the IMAGE tab, access various picture settings, such as Brightness and Contrast.
Switching the projector off
1. Press on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to conrm your
intention to switch off.
The lamp will switch off, and the Power indicator on the control panel will ash amber for a few seconds whilst the lamp cools. The Power
indicator on the control panel will then show amber and the Warning indicator will show green. The projector will be in Standby mode.
2. Switch off at the switch next to the power connector. Disconnect the power cable from the projector.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector

Rev D July 2014
CONNECTION GUIDE
E-Vision 6000 Series
High Brightness Digital Video Projector
LENS SHIFT
ZOOM
–
FOCUS
+
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1 LAMP2
AUTO