DOD RC400S User manual

RC400S / RC500S
User Manual

1
Table of Contents
Product Features...................................................................................2
Safety Precautions................................................................................5
Package Contents .................................................................................7
Optional Accessories ...........................................................................8
Camera Controls ...................................................................................9
Getting Started ....................................................................................12
Installing Your Camera .......................................................................14
Basic Camera Operation.....................................................................16
Mobile viewer \ DOD Dash Cam Application.....................................17
Functions of DOD Dash Cam APP (iOS) ...........................................18
Functions of DOD Dash Cam APP (Android)....................................22
Camera Settings..................................................................................26
Camera Modes.....................................................................................29
Playback on PC \ DOD Video Player..................................................30
Transferring Files................................................................................32
Video Output........................................................................................32
Firmware Update .................................................................................32
RC400S Specifications .......................................................................33
RC500S Specifications .......................................................................33

2
Product Features
New SONY Exmor Sensor- ISO Sensitivity Up to ISO 12800
New SONY Exmor CMOS sensor with improved sensitivity not only under
normal lighting but also in low light and near infrared light condition.
Dual Channel
The front and rear view of your vehicle are recorded in 1080p high definition
quality; moreover, the image captured at a 145º view angle at front and 140º in
the rear for optimal coverage and clarity.
Integrated 10 Hz GPS processor
Integrated the fastest 10 Hz GPS processor, updates GPS data 10 times per
second, recording your driving
conditions accurately. Automatically synchronizes
the time/date with the atomic clock.
Advanced WDR Technology - Stunning Videos in Any Light
WDR technology, well-
balanced exposure for any condition. It makes night shots
brighter; prevent overexposure and to create the clearest image.
Speed Camera Alert
Remind you of approaching fixed speed camera locations well in advance so you
can slow down in time. Stay away from traps and always stay in control.
*This function is only supported in some specific regions.
Parking surveillance
Ensure your peace of mind by recording continually even when you have parked
and left your car. Record and lock a file if unusual shock or movement is
detected. *DOD DP4 hardwiring kit required

3
Support to 128GB Micro SDXC Memory Card
4X storage compatibility compared to predecessor model, supports up to 128GB
with more than 18 hours of recording.
DOD GPS Player
The DOD GPS Player generates 1080p video recordings with real-time driving
data clearly at a glance.
Wi-Fi Connectivity – View Remotely with The Free APP
No need to wait any longer whenever you would like to replay the exciting
moments. Simply transfer or visualize files from the dash cam’s memory right
from your smartphone/tablet via the DOD APP..
f/1.6 Large Aperture Glass Lens - Super Low Light Performance
Equipped with f/1.6 large aperture, capturing better night shots than
conventional f/2.0, and records clearly sophisticated details such as the license
plate and others.
6G Sharp Glass Lens
6-Element sharp lens, made of 6 layers of glass, provides stunning clear and
non-deformed images.
G-Sensor Automatic Trigger for File Protection
When an impact, emergency brake occurred or the car tilted, the device will
lock the current video files automatically. Important files will not be overwritten
by loop recording.

4
Loop Recording
When the storage space is full, it can automatically overwrite the unprotected
files.
Adjustable Circular Polarizing Filter
Adjustable filter reduces windshield glare and enhances saturation at the same
time.

5
Safety Precautions
Product
Do not disassemble, repair, modify your camera or power related accessories. For warranty
service, please contact DOD Tech Support.
Do not adjust camera while driving.
Avoid exposing your camera to extended periods of humidity and/or heat.
Prolonged exposure may reduce the product’s lifespan.
Do not spray water or cleaning agents directly onto the camera.
Fluids may cause fire, electric shocks, or malfunctions.
Avoid installing camera where it may obstruct the driver’s view or airbag deployment.
Car Power Adaptor
Use ONLY the power adapter supplied with your unit.
Other power adapters may create a safety hazard or damage the unit.
Do not use damaged power adapters or cords. If damaged, please disconnect the power adapter
and contact DOD Tech Support for assistance.
Do not pull, insert, or bend the power cable using excessive force.
Do not operate or handle power cable with wet hands.
In specified cars, the power may be constantly supplied to the device even the engine is turned
off. This may run out the vehicle battery. The optional DOD DP4 kit equipped with low-voltage
protection design to prevent battery drain.
Battery
Keep the device away from heaters or other hot objects.
Store the camera at lower temperatures to reduce the rate of self-discharge and preserves the
initial energy stored in the battery. The battery in the device self-discharges over a period of time
naturally whether the battery is used or not.
Charge the dash camera for 5 minutes if you are unable to turn on the camera.

6
Others
Test the MicroSD memory card regularly as the memory card is a consumable item, and needs to
be replaced periodically.
Reformat the memory card every two weeks to prolong its lifetime. You should only do this
AFTER you’ve download any files from the card that you would like to keep, since formatting the
memory card will clear all files.
DOD does NOT responsible for any malfunctions occurred from the use of disingenuous,
modified, or unauthorized parts and accessories.
DOD does NOT guarantee the recording of accidents which may cause the device malfunction
and faulty.
The working temperature of this product is -20°C~65°C(-4°F~149°F). Please ensure the device is
stored within the temperature range; or the device may be damaged by the heat and work
incorrectly, which will not be covered by warranty.
DOD is NOT responsible for the loss of any recorded video during operation due to unexpected
factors or force majeure when driving.
The video recordings made by this Dash cam are intended for personal use ONLY.

7
Package Contents
Dash Cam
User Guide
Rear Dash Cam Car Power Adaptor
Rear Cam Connection Cable
Note: Supplied accessories may vary by region or model.

8
Optional Accessories
DP4
DP4 hardwiring kit offers constant
source and prevent battery drain with
low-voltage protection.

9
Camera Controls
●1SOS Emergency File Lock【 】
While recording, press this button to lock current recording file from being over written.
●2MIC / Display OFF【 】
During standby / recording mode:
Press 【 】once to turn ON/OFF voice recording.
●3Wi-Fi Connection【 】
To turn on Wi-Fi for smart device connection.
●4Reset Button
Reset to factory settings.
Press to force the device to reboot.
Use a small pin to press the button.

10
Camera Controls
●5Operation Status LED
OFF– Wi-Fi Disabled
ON – Wi-Fi Connected
Flashing – Connecting / Wi-Fi Stand by
OFF – Microphone mute (GPS signal confirmed)
ON – Microphone recording (GPS signal confirmed)
Flashing – GPS Locating
REC
OFF – Dash cam off / malfunction
ON – Stand by
Flashing – Recording
●6Holder Release【 】
Press release lock mechanism for cam removal.
●7Speaker

11
Camera Controls
●8Micro USB Port【 】
For use with the supplied Car Power Adaptor or USB data cable.
●9MicroSD Slot
Required a microSDHC/SDXC card, class 10 or above. Supports up to 128GB.
●10 AV-IN Connection Port【 】
Rear cam connection port.

12
Getting Started
Setting Up Your Camera
Set up your camera inside your vehicle to ensure easy access to power.
1. Start With or Without SD Card.
To use without SD card, please skip to step 2.
To use with SD card, please format the MicroSD card before initial use.
To save recorded videos stably, DOD Tech recommends formatting your SD card every two
weeks.
Note: Requires the MicroSD card Class 10 or above, supports up to 128GB
Note: After formatting the SD card, all of your data will be lost. Be sure that you have backed
up the important files.
Video Recording Length
*Video recording length may vary depending on environmental conditions.
Storage/Quality 1080pRecording length
16GB 110 minutes (1.8 hours)
32GB 200 minutes (3.2 hours)
64GB 380 minutes (6.3 hours)
128GB 780 minutes (12.8 hours)
2. Connect the Power Adapter.
Plug the DOD power adapter into your vehicle’s power outlet.
Insert the USB plug into the USB port.

13
Getting Started
3. Turn on Your Vehicle.
Power from your vehicle through the outlet will automatically turn on your camera and when
power is turned off your camera will shut off automatically. The camera automatically begins
recording every time it is turned on and stops recording when it is turned off.
Note: In specified cars, the power may be constantly supplied to the device even the
engine is turned off. This may run out the vehicle battery. The optional DOD DP4 kit
equipped with low-voltage protection design to prevent battery drainage.
4. Turn on/off Your Camera.
The dash cam will turn on and off automatically with the power supply from your vehicle.
5. Connecting Wi-Fi to Your Smart Device.
Press the Wi-Fi connection button to activate.
Open DOD Dash Cam APP from your smart device.
Follow the instructions within the APP or see page.23.
6. Access to Settings
Upon powering up the camera for the first time or after upgrading the firmware on the
device, you can access to the setting menu via DOD APP and change the settings to your
personal references rather than default.
Your camera will automatically sync with the time and date to the atomic clock once the
time zone is correctly set.
Note: The time zone must be manually adjusted for daylight savings.

14
Installing Your Camera

15
Installing Your Camera
1. Clean Windshield
Wipe down both the interior and exterior glass for the best image quality.
Keep the mount secured to the windshield.
2. Attach the Mount to Your Camera
Keep the mount secured to the camera.
Please insert MicroSD card to the unit.
3. Camera Installation
Peel off the adhesive mount cover.
Find a location which does not obstruct your view when driving.
It is recommended to place the camera behind the rear view mirror without obstructing
either lenses or camera functions.
Press the mount firmly against the glass.
4. Install the Car Power Adaptor
If you have not done so previously, plug the car power adaptor into your vehicle's power
outlet.
Insert the micro USB plug into the port of the camera, and insert the power adapter into
the cigarette lighter socket of your car.
The wiring can be hidden in the headliner, seams and rubber strips around the perimeter
of the windshield.
5. Adjust the Angle
The camera is adjustable via twist motion, which can be loosen by press and hold the
release button on the mount.
Angle your camera slightly below the horizon line to minimize glare.
6. Remove the Lens Protector Film
Your camera is now installed and ready for daily use.
Note:
Always use the supplied car power adaptor to avoid the unexpected damage.
If grease, fingerprints, or blots are found on the external/internal windshield of the car,
please wipe it clean or install the unit on an unaffected area. Blots may worsen the
recording quality or may cause the bracket to be unstable.
Do not turn on Motion Detection unless your vehicle is parked. If Motion Detection is
enabled while driving, the camera may not continuously record.
DOD Tech recommends setting the G-Sensor to low.

16
Basic Camera Operation
Everyday Operation
Your dash camera will automatically turn on and start recording when it starts receiving
power. By default, the camera will record over the oldest videos when the memory card is
full (loop recording).
Continuously Powered Electrical Outlet
If your camera is continuously powered, the camera will not automatically shut down when
your vehicle is turned off. To turn off your dash cam while the vehicle remains running,
simply unplug the micro USB power cable.
The camera may be left on while parked to capture video while you are away.
“Continuously-Powered-Electrical-Outlet” operation will slowly drain your vehicle’s battery
and may eventually prevent your car from starting.
Video Directory
Videos will be saved in the memory card and or in internal storage, normal videos are in the
root directory and the protected files will be saved in the “RO” (Read Only) file.
File-naming format: 2016_0725_180946_002
Year /month/day, time, sequence of the video recorded at the same day.
“F” folder indicates videos from front camera, and “R” refers to videos recorded from rear
camera.

17
Mobile viewer \ DOD Dash Cam Application
The DOD Dash Cam Application is designed to be compatible with all DOD Tech products
equipped with Wi-Fi function. Control your camera, download recorded videos and photos,
and monitor real-time live view through your smartphone.
Download
Please download and install the DOD Dash Cam Application from Google Play or App
Store on your smartphone.
Note: DOD Dash cam Application requires Android 4.0 / iOS 7 (or newer).
Connect Wi-Fi
1. Turn on the Wi-Fi connection to enable the camera to AP mode (Access Point Mode) by
pressing [▼]to turn on the Wi-Fi during Standby mode, or access it by pressing [ /]twice,
select [Wi-Fi] and press [ /OK].
2. Follow APP User Guide to connect your smart device to Hummer. Or open the DOD
Dash Cam APP on your smartphone, then follow the instruction arrows on the bottom half
of the screen.
3. Your smartphone and camera are now connected.
Note:
• The Wi-Fi password is only required once during set up.
• Wi-Fi range between the camera and your smartphone is limited to approximately 10 meters (32
feet)

18
Mobile viewer \ DOD Dash Cam Application
Functions of DOD Dash Cam APP (iOS)
Please make sure:
1.Dash Cam is on
2.Wi-Fi function is enabled
For iOS Platform:
To connect the smart device, firstly access to
“Settings” on your iOS device
Select your DOD Dash C
am model and enter the
default password to connect.
*Password: 12345678
Note: Password can be changed in dash cam settings