Dogtra 1100NC User manual

Copy right c 2001 Dogtra Company
1250 E. 223rd Street, Suite 119
Carson, CA 907 5
Tel :[phone]
Fax :[phone]
Web Site : www.dogtra.com
Toll Free:1-888-811-9111
REMOTE CONTROLLED
DOG TRAINING COLLARS
OWNER S MANUAL
TM
Web Site : www.dogtra.com
Dogtra Company

OVERVIEW
MAIN FEATURES
SAFETY
COLLAR PACKAGE CONTENTS
DESCRIPTION OF TRANSMITTER PARTS
BUTTON FUNCTION
DESCRIPTION OF COLLAR PARTS
BATTERY CHARGER
CHARGING THE BATTERIES
TESTING YOUR
COLLAR
OPERATING INSTRUCTIONS
MAINTENANCE
ACCESSORIES
WARRANTY AND REPAIR
INFORMATION
3
5
6
7
8
13
15
20
21
2
26
29
30
31
1
CONTENTS

3
OVERVIEW
training collars give you the
ability to communicate with your dog in a
timely manner even when the dog is far away
from you. This makes it much easier for the
dog to learn its lessons because late corrections
are very confusing to the dog.
remote collars offer two
different kinds of stimulation:
Pressing the Nick button causes a very
short single pulse of electrical stimulation. It
automatically shuts off in a fraction of a
second, no matter how long the button is held
down.
The Nick is used as a substitute for leash
corrections when the dog is off lead.
It is mild but motivating!
OVERVIEW

5
Easy to use transmitter.
All intensity level adjustments are made
from a digital dial on the transmitter. The
dial works like a rheostat, gradually
increasing the intensity with no jumps
between intensity levels.
Reliable stimulation effective for all types
of dogs no matter how heavy the coat.
The has a 1/2 mile range.
Waterproof collar receiver and water-
resistant transmitter on .
No external antenna on the collar receiver.
User replaceable and rechargeable Ni-MH
batteries.
Over 3000 different identity codes to
prevent conflicts with other collars.
MAIN FEATURES
MAIN FEATURES
Pressing the Constant button causes the
collar to emit electrical stimulation that stays
on for up to twelve seconds as long as the
button is held down. Constant stimulation is
used for low level applications for guiding
dogs into the desired behavior or as a reserve
high to stop unsafe behaviors such as chasing
animals or cars.
All collars come complete with a
handheld transmitter, dog collar with receiver,
battery charger, test light and operating
instructions manual.
OVERVIEW

7
PACKA E INCLUDES
Transmitter
Receiver
Battery charger and splitter cable
Test light
Owner s manual
COLLAR
PACKA E CONTENTS
6
SAFETY
collars use state-of-the-art micro-
computer technology. Both the transmitter and
receiver have an automatic control which
limits the stimulus to twelve seconds when
used in the Constant mode and a fraction of
a second when used in the Nick mode. A
filtering system prevents reception from
sources other than your transmitter.
SAFETY

9
TRANSMITTER
Transmitter Antenna
A short 2 antenna is supplied with the
.
The antenna should be screwed into the top of
the transmitter to ensure that the signals are sent
properly to the collar receiver and that maximum
range is attained.
2Antenna
8
TRANSMITTER
DESCRIPTION OF
TRANSMITTER PARTS
Antenna
Indicator Light
Nick Button
Constant
Intensity
Selection Dial
Battery Charging
Receptacle
and Cover
transmitter

11
TRANSMITTER
Transmitter Battery Charging Receptacle
Located on the side of the transmitter, the
receptacle is covered by a rubber plug. Insert
one end of the battery charging cable into the
receptacle to charge the battery.
(See Battery Charging Procedure.)
After charging is completed, close the
receptacle with its rubber plug to prevent dirt
from getting inside.
Transmitter
Charging
Receptacle
10
TRANSMITTER
Intensity Selecti n Dial
The intensity selection dial is located on the top of
the transmitter.
In the fully counter clockwise position- zero
setting- no electrical stimulation occurs even when the
transmitter button is pressed (a satety feature).
Moving the dial from the zero setting in a
clockwise manner, electrical stimulation will begin .
Moving the dial clockwise, the level increases in a
linear progression - no steps or increments up to the
level one hundred (fully clockwise).
Conversely, moving the dial counter-clockwise, the
level reduces in a downward linear progression until at
the zero setting (fully counter-clockwise).
This feature allows for subtle adjustment of the level
(upward of downward) while the transmitter button is
held down continuously - providing e-linear training.

13
BUTTON FUNCTION
The transmitter for has two
buttons.
The top button gives Nick stimulation when
pressed. The bottom button gives Constant
stimulation for as long as you press the button up to
twelve seconds.
BUTTON FUNCTION
Constant
Nick
12
TRANSMITTER
Transmitter Indicat r Light (LED)
The transmitter indicator light is located by
the intensity selection dial.
When a button on the transmitter is pushed,
the red light comes on to indicate that the
transmitter is being activated.
If the indicator light emits a double blink
while the button is pressed, the battery needs to
be recharged.
L D

15
COLLAR
DESCRIPTION OF
COLLAR PARTS
Collar
On/Off Button
Contact Points
Indicator
Light
Battery
Charging
Receptacle
and Cover
Collar strap
1
BUTTON FUNCTION
Nick Butt n
When the Nick button is pushed, the
receiver emits an extremely short pulse of
electrical stimulation that automatically shuts off
no matter how long you leave your finger on the
button. The Nick is mild but motivating!
C nstant Butt n
Pressing the Constant button gives
stimulation for up to twelve seconds, at which
time, the collar will turn off. The collar will
reactivate, when you push the button again.

17
COLLAR
Receiver Indicat r Light (LED)
Located on the front of the collar, the indicator
light comes on and blinks once every 2 seconds
after the collar is turned on.
The blinking will change from a single flash to a
double flash, when the collar needs to be recharged.
When the Constant button on the transmitter is
pushed, the collar indicator light will glow steadily
for as long as you hold the button down, for up to
twelve seconds. When the Nick button is pushed,
the light comes on for a fraction of a second.
16
COLLAR
On/Off Butt n
To turn the collar on, press the button on
the end of the receiver for one full second until
the light comes on.
To turn the collar off, hold the button down
for one full second until the red light goes off.
A delay has been built into the on/off switch
so the dog cannot turn the collar off by accident.