DORIC DS2079 User manual

1
www.doric.com.au
Cut the door stile to the dimensions given bellow to mount the handle:
Bellow the door centerline Above the door centerline
172
756
752
64
64
160
60
19
25
19
60
Door Centreline
172
756
752
64
64
160
60
19
25
19 8
60
Door Centreline
Doric hinged security door lock,
3 point lock
Cut the door stile to the dimensions given below to mount the handle:
Below the door centerline Above the door centerline
Installation Instructions - Multi Point

2www.doric.com.au
Fitting Centre lock
3. With the top slave unit in the locked
position, attach the top rod.
4. Find and pull the bottom out through the
bottom cutout.
5.Fully insert centre lock into cut out.
Secure centre lock with two 12mm
countresink self tapping screws supplied.
6. Fully insert the slave locks and secure
with 12mm countersink self tapping
screws.
Assembling top and bottom locks to rods
2. Feed the top and bottom operating
rods fitted with the actuating bar through
the the top cut. Do not fully
insert slave locks into cutouts.
ABOVE THE CENTRE LINE
BELOW THE CENTRE LINE
Extrusion Cut Outs
1. Preasemble and connect
the top and bottom operating
rods to the Actuator bar.