Dreame DreameBot L10S Ultra User manual

Robot Vacuum and Mop with
Self-Cleaning and Auto-Empty
User Manual
The illustrations in this manual are for reference only. Please refer to the actual product.

Content
User Manual
Benutzerhandbuch
Manuel d'utilisation
Manuale utente
Manual de usuario
Руководство пользователя
Instrukcja obsługi
1
27
55
82
108
134
162
189
215

EN
DE
FR
IT
ES
RU
PL
HE
SA
שמתשמל ךירדמ

1
EN
Usage Restrictions
Safety Information
·This product should not be used by children younger than 8 years old nor
persons with physical, sensory, intellectual deficiencies, or limited experience
or knowledge without the supervision of a parent or guardian to ensure safe
operation and to avoid any risks. Cleaning and maintenance shall not be
performed by children without supervision.
·The appliance is only to be used with the power supply unit provided with the
appliance.
·This appliance contains batteries that are only replaceable by skilled persons.
·Clear the area to be cleaned. Children shall not play with the appliance.
Ensure children and pets are kept at a safe distance from the robot while it is
operating.
·Do not install, charge or use the appliance in the bathrooms or around the
pools.
·This product is for floor cleaning in a home environment only. Do not use it
outdoors, on non-floor surfaces, or in a commercial or industrial setting.
·Ensure that the appliance operates correctly in a proper environment.
Otherwise, do not use the appliance.
·If the power cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
·Do not use the robot in an area suspended above ground level without a
To avoid electric shock, re or injury caused by improper use of the appliance, please read the user
manual carefully before using the appliance and keep it for future reference.

2
EN Safety Information
protective barrier.
·Do not place the robot upside down. Do not use the LDS cover, robot cover, or
bumper as a handle for the robot.
·Do not use the robot at an ambient temperature above 40℃ or below 0℃ or on
a floor with liquids or sticky substances.
·To prevent damage or harm from dragging, clear any loose objects from the
floor, and remove cables or power cords on the cleaning path before operating
the appliance.
·Remove fragile or small items from the floor to prevent the robot from bumping
into and damaging them.
·Keep hair, fingers, and other body parts away from the suction opening of the
robots.
·Keep the cleaning tool out of reach of children.
·Do not operate the appliance in a room where an infant or child is sleeping.
·Do not place children, pets, or any item on top of the robot regardless of
whether it is stationary or moving.
·Keep the cleaner out of reach of children.
·Use only the officially-approved detergent. Do not add any liquid such as
alcohol or disinfectant.
·Do not use the robot to clean any burning objects. Do not use the robot to pick
up flammable or combustible liquids, corrosive gases, or undiluted acids or
solvents.
Usage Restrictions

3
EN
Safety Information
Usage Restrictions
·Do not vacuum hard or sharp objects. Do not use the appliance to pick up objects
such as stones, large pieces of paper or any item that may clog the appliance.
·Plug must be removed from the socket-outlet before cleaning or maintaining
the appliance.
·Do not wipe the robot or the base station with a wet cloth or rinse them with
any liquid. After cleaning washable parts, fully dry the parts before reinstalling
and using them.
·Please use this product in accordance with the instructions in the User Manual.
Users are responsible for any loss or damage that arise from improper use of
this product.
Batteries and
Charging
·Do not use any third-party battery orbase station. The robot can only be used
with the model RCS9 base station.
·Do not attempt to disassemble, repair, or modify the battery or the base station
on your own.
·Do not place the base station near a heat source.
·Do not use a wet cloth or wet hands to wipe or clean the base station's
charging contacts.
·Do not improperly dispose of old batteries. Unneeded batteries should be
discarded at an appropriate recycling facility.
·If the power cord becomes damaged or broken, stop using it immediately and
contact after-sales service.

4
EN
Laser Safety
Information
Safety Information
·The laser distance sensor complies with the IEC 60825-1:2014 standard for
Class 1 laser products and does not generate dangerous laser radiation.
Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLS6LADC is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
·Make sure the robot is turned off when being transported and kept in its
original packaging if possible.
·If the robot will not be used for an extended period of time, fully charge it, then
turn it off and store it in a cool, dry place. Recharge the robot at least once
every 3 months to avoid over-discharging the battery.
·The lithium-ion battery pack contains substances that are hazardous to the
environment. Before disposing of the robot vacuum, please first remove the
battery pack, then discard, or recycle it in accordance with local laws and
regulations of the country or region it is used in.
·When removing the batteries from the product, it is better to use up the
batteries and make sure your product is disconnected from power.
1) Uninstall the screw on the bottom, then remove the cover.
2) Unplug the battery connector, then remove the batteries. Do not damage the
battery case to avoid any risk of injuries.
3) Return the batteries to a professional recycling organization.
Batteries and
Charging

5
EN
Package Contents
Other Accessories
Product Overview
Side Brush
Mop Pad × 2
preinstalled
Robot
Base Station
Mop Pad Holder × 2 Multi-Surface Floor
Cleaner
User Manual
Power Cord Cleaning Brush Dust Collection Bag
󽘘replacement󽘙

6
EN
Robot
Product Overview
Spot Cleaning Button
· Press briey to start spot cleaning
Power / Clean Button
· Press and hold for 3 seconds to turn on or o
· Press briey to start cleaning after the robot is turned on
Dock Button
· Press briey to send the robot back to the base station
· Press and hold for 3 seconds to disable Child Lock
Status Indicator
· Solid White: Cleaning or cleaned
· Quickly Blinking Orange: Error
· Solid Orange: Low battery or paused
Note: Press any button to pause while the robot is cleaning or returning
to charge.

7
EN
Robot and Sensors li󽗈 ensors
Main Wheel
Main Brush
Universal Wheel
Brush Guard
Main Wheel
Brush Guard Clips
Mop Pad Holder
Mounting Holes
Side Brush
Carpet Sensor
LDS Upper Cover
Laser Distance Sensor (LDS)
Bumper
Cover
Charging
Contacts
Connectors
Automatic Water
Relling Inlet
AI Visual Sensor
Line Laser Sensors
Reset Button
Press and hold for 3
seconds to restore to factory
settings
Wi-Fi Indicator
On: Wi-Fi connected
Quickly Blinking: Awaiting
connection or connecting
Slowly Blinking: Wi-Fi not
connected
Edge Sensor
Auto-empty Vent
Dust Bin
Filter
Auto-empty
Vent
Bin Clip
Dust Bin Cover Clip
Bin Cover
Filter Clip
Product Overview

8
EN
Base Station
Product Overview
Washboard
Upper Cover
Handle
Handle
Water Tank Clip
Water
Tank Clip
Float Ball Water Pipe
Filter
Used Water Tank Clean Water Tank
Floater
Base Station Buttons
Child Lock
Press and hold the and buttons for 3 seconds to activate or deactivate
Child Lock. After Child Lock is activated, all buttons on the robot and the base
station are locked.
Leave Button Briey press to make the robot leave the base station
Clean Button Briey press to make the robot clean all areas
Dry Button
Note: The buttons on the base station will work only when the robot is placed
onto the base station.
Dust Cabinet
Cover
Briey press to make the base station start or stop drying the
mop pads