DREAMS 215-00945 User manual

215-00945 (Solid slats)
Macgill Bed 215-00946 (Sprung slats)
Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the.
Assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children s reach.
In the unlikely event that this product has missing or damaged parts, please call
03442 920000 to obtain spares
Before you
Start, here
are some
helpful
advices.
Revision number 1/1

M6 35mmx6pcs
M3 35mmx1pc
M3 50mmx4pcs
M6nutx6pcs
M6Washerx6pcs
M4Allen key 2pcs
M5Allenkey 1pc
Revision number1/1
PARTS
Fittings
QTY
1
1
2
1
A
B
C
F
G
D
E
4
NO. PARTLIST
(1) HEADBOARD
(2) FOOTBOARD
(3) WOODEN FEET
(4) SIDERAILS
(5) SUPPORTLEG

ASSEMBLY
STEP1
(1). Attach the Wooden Feet to the
headboard and footboard.
(2). Loosen thepre-assembled bolts
ontheheadboard and footboard
withtheAllenKey(G)
Note: Leave10mmprotruding as
in thediagram
Revision number1/1

ASSEMBLY
STEP2
(1).Attachthesiderailstothe
headboardandfootboard.
Note Fitsidepanelslocating
thebracketsbehind theflat
washers.
Revision number1/1

ASSEMBLY
STEP3
MAKECERTAINTHEBEDIS
SQUAREDUP.AS SHOWNON
THERIGHT.
Onceallfourcomersarelocated.
makesurethebed isstillsquare
asinthesketch.then tighten all
thebolts100%usingAllenkey
(G)
Revision number1/1

ASSEMBLY
STEP4
(1). UseTappingScrew(C)to
tightentheSiderailsto
HeadboardandFootboard.
Revision number1/1

s
ASSEMBLY
STEP5
NOTE:Slatsnotsuppliedshown
forreferenceonly.
Bothslatson "step3"and"step
4"can beassembled tothe
bedstead.Youcan makeachoice
betweenthetwoslats.
OPTION"A":DREAMSFIXED
WOODSLATS
（1） Carefullylocatetheslats
ontotheunit.Fixoneend
ofslats,
（2）Usebolt(A),Washer(E)
andJCN nut(D)tofixthe
unitusingAllen Key(F)
（3）UseTappingScrew(B) to
fixtheSupportleg
（4）Fixall otherslats.
（5）Byhandinsertadjustable
feet intoeachsupport leg
byturningclockwise.
Revision number1/1

ASSEMBLY
STEP6
OPTION"B":DREAMSSPRUNG
SLATS
1)Usethebolttofixsupportleg
ontotheslatframe.Pleasenote
thattheseboltsaretobefound
insidetheslat framebox.
2)Carefullylocatetheslatsonto
theunit.
3)Usebolt(A) ,Washer(E) and
JCN nut(D)tofixtheunitusing
Allen Key(F)
Revision number1/1