DREAMS Seoul Sleepmotion 200i User manual

Two person
assembly
1.5 hour approx
assembly time
MK1 220601
KOBE LIFESTYLE TV BED
SLEEPMOTION 200i

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 2
Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way
to your best ever night's sleep. Before you begin building your bed, please take a moment
to read through the instructions and make sure that you've got all the relevant parts
listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 3
Parts
The bed you have purchased comes with a Sleepmotion 200i Lifestyle electric bed base.
Complete the assembly of the Sleepmotion base before assembly of the bed frame. Assembly
Instructions are included within the Sleepmotion base carton.
Once the base is assembled in the final location, follow the steps below to build your bed frame
around it. The instructions for the bed frame are for both a normal foot end or an audio foot end
with a 2.1 sound system. Please follow the relevant instructions in each of the steps.
1
2
Parts list
The dotted lined parts shown above are packed in the sleepmotion bed base carton itself.
1
OR
A. Headboard
B. NON-Audio Footboard
BA. AUDIO Footboard
C. Side Rails
1
1
O.
P.
Q. 2
R. 5
S. 5
1
1U.
1
1
V. Remote Control Holster
W. HDMI 90° Adapter
Pack ed inside accessory box in footboard Pack (2 or 2A).
T or TA.
Mains Power Lead - 3.5 mt
Aerial Lead - 4 mt
HDMI Lead - 2.8 mt
Cable Clip
Cable Tie
TV Lift Remote Control
TV Installation Kit
TA BA
TB
Audio Footboard Standard Footboard
TV Lift
Remote Control
Audio/TV Lift
Remote Control
BT OPT
MODE
MIN
+
VOL.
BASS
TREB.
MAX
+
+
ON OFF
FOR NON-AUDIO VERSION FOR AUDIO VERSION
C
C
A
OPQ
R
SU
TV
Installation
Kit
V
B
BA TA
T
OR
AUDIO VERSION
NON-AUDIO
VERSION
W

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 4
Before starting assembly please refer to the owners
manual supplied with your sleepmotion 200i bed base
and follow the instructions taking note of any safety
precautions or operational safety requirements of the
installation.
In the room where bed will be used, first prepare the bed base by fitting the eight long
legs - 6‘’ (15cm), see Step 2.
Connect the power and check the operation then step by step follow the bed assembly
instructions below, to build the bedstead around the sleepmotion 200i bed base.
Tools required
Please check you have all these below
Tape measure
0 1 2 3 4 5 6 7 8 9 1010 11 12 13 14 15 16 17 18cm
Fittings
Please check you have all the parts listed below with your product:
Hardware needed for fitting side rails to headboard & footboard.
Hardware pack (A) packed in Sleepmotion side rail Pack 3L.
Spring washer for M8 bolts
Bolts (M8x30mm) for fitting
side rails (C) to headboard &
footboard
a x16 b x16
Flat Washer for M8 bolts
c x16
Allen Key for M8 bolt
d x1
Important:
M8 x 25mm
Bolt sets Counter-sunk screw
sets (M6x12mm)
Counter-sunk screw
sets (M4x12mm) Allen key (4mm) Allen key (2.5mm)
o x2
TV Support slide
Hardware needed for installation of the TV is packed in the accessory box, in footboard Pack 2 or 2A
(z) choose a suitable Allen key
(y) choose a pair of suitable bolt sets

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 5
ad
b
c
10mm
ax8 bx8 cx8 dx1
1
A
B
BA
NON-AUDIO
AUDIO
At time of purchase you would have chosen Non-Audio or Audio version of this TV Bed.
This guide shows both versions and assembly steps are the same.
Prepare the headboard and footboard for assembly of the bed.

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 6
Assemble the bed frame around the bed base.
3
ax4 bx4 cx4
dx1
A
C
a
b
cd
90%
10mm
20mm
2
First, screw in the eight
6" (15cm) legs as shown.
Position the electric bed base.
Place the headboard in the location in which it shall be used and attach the right hand side rail to it.
Make sure the electric bed base is correct way round with mattress stopper at the foot end.
Carefully lift and place the base into the corner between headboard and side rail as shown - it is heavy so
please get help. Leave a gap around the perimeter, see sketch below right.

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 7
4
5ax4 bx4
cx4 dx1
B
BA
or
90%
d
a
b
c
Position footboard and connect side rail brackets.
i) Connect Power Lead for electric base to your wall socket - for safety this
must be an earthed power supply.
ii) Raise the head and foot ends of the bed base using the remote control.
Connect power to the electric bed base.

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 8
Connect Main Power Lead (O) to
your wall socket - for safety this
must be an earthed power supply.
O
NON-AUDIO AUDIO
Press the “UP” button to raise the TV lift.
6 Connect mains power supply, it is exactly same for Audio or Non-Audio.
7Raise the TV lift.
TTA

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 9
8
Note: For illustration purposes only, TV connections may vary.
Tip:
Before fitting the TV, push any leads through each duct from the top choosing
the best side to use depending on where the connection ports are on back of
the TV. Never cross leads from one side to the other unless as shown in the
instruction, in this Step.
O Mains power lead
Q HDMI lead
P Aerial lead
TV Power Lead
supplied with the TV
If optical socket is on rear RH side of TV,
the plug is in the correct position.
If optical socket is on rear LH side of TV, draw the loose lead out of
the port and lay across TV Lift cover board as shown. Use lead clip
(R) on each side to keep lead straight and out of harms way.

Kobe Sleepmotion Lifestyle TV Bed - Assembly guide - Page 10
9
5mm
Max TV Height
573mm
Height of TV is normally pre-set - follow this guide if it needs to be changed.
i) Loosen the two bolts.
Measure the height of the TV,
Adjust the lid lifter column adding 5mm to height of TV.
Re-tighten the two bolts.
z
ii) The upper part of each TV support (o) slides to hold front of TV in place.
Please follow the instructions on how to correctly set these supports in Step 10.
o