DREAMS MORTEN KING BED User manual

MORTEN KING BEDDOUBLE BED AND
Assembly Instructions
OPTION 1:
SOLID SLATS
OPTION :3
SLEEPMOTION
OPTION 2:
SPRUNG SLATS

Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please visit our website
Safety and care
It’s really important to ensure children and animals are kept away from the
at www.dreams.co.uk/help
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
kept away from children and animals to prevent any risk of suffocation.
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
Top tip
whilst moving it.
Morten Double Bed and King Bed - Assembly Guide - Page 2

1. Headboard 01 PC
Parts List
5. Middle Leg Support 02 PCS
Parts
Important infomation
Please check you have all parts listed below.
1
2
3-1
3-2
4
5
6-1
6-2
7
7
2. Footboard 01 PC
3-1. Side Rail 01 PC
4. Support Rail 01 PC
6-1. Side Frame 01 PC
Morten Double Bed and King Bed - Assembly Guide - Page 3
7. Drawer Frame 02 PCS
3-2. Side Rail 01 PC
6-2. Side Frame 01 PC

Morten Double Bed and King Bed 4 - Assembly Guide - Page
0 1 2 3 4 5
cm
Bolts M6x mmx8pcs65 Nut M6x8pcs Lock Washer M6x8pcs Flat M6x1Washer pcs6
Please check you have all the fittings listed below, that you can find in Box # in the string tagged plastic bag2
Tools required
Please check you have all these below:
ABCD
6 7 8 9 10 11 12 13 14 15 16 17 18
Wrench K x1pcs10
E
Sleeve Nut 20 12M6x mmx pcs
F
Allen Key x pc2
G
Bolt M8x20mmx pcs2
H
Bolt M6x mmx pcs30 6
I
Bolt M6x45mmx pcs8
J
Fittings
together with this Assembly Instructions.

STEP 1
- Use Bolts (mounted on the
Headboard and Footboard)
and Bolts (H) to fix the Side
Rails (3-1) and (3-2) onto
Headboard (1) and
Footboard (2) by using
Allen Key (G).
1
2
ASSEMBLY
3-1
3-2
Morten Double Bed and King Bed - Assembly Guide - Page 5
G
G
H

4
5
STEP 2 G
J
D
ASSEMBLY
(1) Attach Support Rail (4) to
Middle Legs Support (5).
Use Bolts (J) and Washers (D),
tighten using Allen key (G).
(2) Place the fixed Support Rail (4)
onto the support block on
Headboard (1) and Footboard (2).
IMPORTANT
SOLID SLATS OPTION
Once the feet have been assembled and attached,
They should be adjusted to ensure they do not
touch the floor, (10mm above the floor) to allow
for movement once the mattress is placed on the
bed frame.
It is important to note that when moving the bed
that it is not dragged into its new position to
prevent the possibility of these feet being twisted or
angle to one side, which could lead to the collapse
of the centre of the legs.
To move the bed, remove the mattress and lift the
bed into its new position to avoid damage.
Ensure the feet are at degree to the floor before
repacing the mattress.
10
1
2
5
4
Morten Double Bed and King Bed - Assembly Guide - Page 6

ASSEMBLY
STEP 3
Position Side Frames
(6-1) and (6-2) onto
Headboard (1) using
Bolt (I), Sleeve Nut (F)
to fix the units using
Allen Key (G).
G
GF
I
G
G
I
F
Morten Double Bed and King Bed - Assembly Guide - Page 7
6-2
6-1
SOLID SLATS OPTION

ASSEMBLY
2 - Position the Drawer
Frames (7) onto
Side Frames (6)
using Nut (B),
Lock Washer (C) and
Flat Washer (D), tighten
using Wrench (E).
1 - Use Bolt (A) attached
to the back of
the Drawer Frame (7).
Fully tighten Bolt (A).
STEP 4
7
7E
B
c
D
7
A
Morten Double Bed and King Bed - Assembly Guide - Page 8
6-1
6-2
SOLID SLATS OPTION

G
F
J
D
ASSEMBLY
SOLID SLATS OPTION
G
NOTE: You have bought
your bed, choosing one of
two slat options; either solid
or sprung. Although both
assembly options are
explained here only one will
apply to you. Please follow
the correct procedure for the
slat system which you have
chosen.
OPTION "1": DREAMS
FIXED WOOD SLATS
Carefully locate the slats
onto the unit:
Use Bolt (J), Washer (D) and
Sleeve Nut (F) to fix the unit
using Allen Key (G).
STEP 5
Morten Double Bed and King Bed - Assembly Guide - Page 9

STEP 6
ASSEMBLY
OPPTION "2": DREAM
SPRUNG SLATS
(1) Use the bolt to fix support leg
onto the slat frame. Please note that
these bolts are to be found inside
the slat frame box
(2) Carefully locate the slats onto
the unit.
(3) Use Bolt (J), Washer (D) and
Sleeve Nut (F) to fix the unit
using Allen Key (G).
SPRUNG SLATS OPTION
G
J
D
G
F
LEG
BOLT
SLAT FRAME
Morten Double Bed and King Bed - Assembly Guide - Page 10